1. Introduzione
This manual provides detailed instructions for the proper use and care of your OLEVS Men's Automatic Chronograph Wrist Watch, Model GJ-OS-G2888+L5522PZ-MH. This timepiece features an automatic mechanical movement, chronograph functions, a date display, and a 24-hour (day/night) indicator. Please read this manual thoroughly to ensure optimal performance and longevity of your watch.
Figure 1: OLEVS Men's Automatic Chronograph Wrist Watch (left) and companion watch.
2. Impostazione e avvolgimento iniziale
Your OLEVS automatic watch is powered by the motion of your wrist. Before initial use or after a period of inactivity, it requires manual winding to build up a power reserve.
- Carica manuale: To initiate the movement, gently rotate the crown (located on the right side of the watch case) clockwise approximately 30-40 times while it is in its normal, pushed-in position. This will provide sufficient power to start the watch.
- Indossare l'orologio: Once wound, wear the watch regularly. Normal daily activities will keep the mainspring wound and the watch running accurately. If the watch is not worn for an extended period, it will stop and require manual winding again.
3. Istruzioni per l'uso
The watch features a crown for time and date adjustments, and two push-buttons for the chronograph function.
3.1 Impostazione di data e ora
- Regolazione della data: Estrarre delicatamente la corona verso l'esterno primo clic position. Turn the crown counterclockwise to adjust the date. Avoid setting the date between 9:00 PM and 3:00 AM, as this is when the date change mechanism is engaged and could be damaged.
- Regolazione dell'ora: Estrarre la corona fino alla secondo clic position. Turn the crown clockwise or counterclockwise to set the hour and minute hands. Continue turning until the correct time is displayed. Ensure the 24-hour indicator (often mistaken for a moon phase) is correctly set for AM/PM. Push the crown back into its normal position to start the watch.
3.2 Utilizzo del cronografo (cronometro)
La funzione cronografo consente di misurare il tempo trascorso.
- Inizio: Press the button located above the crown to start the chronograph. The chronograph seconds hand will begin to move.
- Stop: Press the same button (above the crown) again to stop the chronograph. The elapsed time will be indicated by the chronograph hands.
- Reset: Press the button located below the crown to reset the chronograph hands to their zero position.
Figure 2: Multifunctional watch face showing chronograph sub-dials and pushers.
3.3 Caratteristiche luminose
The watch hands and hour markers are treated with a luminous material. After exposure to light, they will glow in dark conditions, allowing for time readability.
4. Manutenzione e cura
4.1 Resistenza all'acqua
This watch is water-resistant up to 30 meters (98 feet). This rating means it is suitable for daily use, such as hand washing, exposure to rain, and cold water baths. It is non suitable for swimming, diving, or hot water activities (e.g., hot showers, saunas), as steam and temperature changes can compromise the seals.
- Non azionare la corona o i pulsanti quando l'orologio è bagnato o immerso.
- Ensure the crown is fully pushed in after any adjustments to maintain water resistance.
Figure 3: Illustration of 30-meter water resistance.
4.2 Pulizia
Wipe the watch case and crystal with a soft, dry cloth. For the leather strap, avoid prolonged exposure to water, direct sunlight, and harsh chemicals to prevent damage and discoloration. If the leather strap gets wet, dry it thoroughly with a soft cloth and allow it to air dry naturally.
4.3 Conservazione
When not wearing the watch, store it in a cool, dry place away from direct sunlight and strong magnetic fields. If storing for an extended period, consider using a watch winder to keep the automatic movement running and lubricated.
5. Risoluzione Dei Problemi
- Orologio non in esecuzione: As an automatic watch, it requires motion to operate. If it has stopped, manually wind it by rotating the crown clockwise 30-40 times. If it still does not run, it may require servicing.
- Data non cambia: Ensure the time is set correctly, especially the AM/PM cycle. The date typically changes around midnight. If the date is stuck, try manually advancing the time past midnight to see if it engages. Avoid adjusting the date between 9 PM and 3 AM.
- Cronometraggio impreciso: Automatic watches can be affected by strong magnetic fields. Keep the watch away from magnets. If accuracy issues persist, the watch may need regulation by a professional watchmaker.
- Il cronografo non si azzera: If the chronograph hands do not return precisely to zero, it may indicate a need for adjustment or servicing.
6. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Numero di modello | GJ-OS-G2888+L5522PZ-MH |
| Tipo di movimento | Automatic Mechanical (Self-winding) |
| Tipo di visualizzazione | Analogico |
| Materiale della cassa | Acciaio inossidabile |
| Materiale della fascia | Pelle |
| Diametro della cassa | 42 millimetri |
| Spessore della cassa | 11 millimetri |
| Larghezza di banda | 21 millimetri |
| Profondità di resistenza all'acqua | 30 metri (98 piedi) |
| Caratteristiche aggiuntive | Luminous hands/markers, Chronograph, Date display, 24-hour indicator |
7. Garanzia e supporto
7.1 Informazioni sulla garanzia
This product is covered by a seller warranty. For specific details regarding the warranty period and coverage, please refer to the purchase documentation or contact the seller directly.
7.2 Assistenza clienti
If you encounter any issues or have questions not covered in this manual, please contact the seller or OLEVS customer support through the platform where the watch was purchased. Provide your model number (GJ-OS-G2888+L5522PZ-MH) and purchase details for efficient assistance.