LOKITHOR J3250 PRO

Manuale utente dell'avviatore di emergenza LOKITHOR J3250 PRO

Modello: J3250 PRO

1. Introduzione

The LOKITHOR J3250 PRO is a powerful and versatile LiFePO4 jump starter designed to provide reliable starting power for vehicles with up to 9.5L gasoline and 7.5L diesel engines. It also functions as a portable power bank and features an integrated LED flashlight. This manual provides essential information for safe and effective use, setup, operation, maintenance, and troubleshooting of your device.

2. Informazioni sulla sicurezza

Please read and understand all safety instructions before operating the LOKITHOR J3250 PRO. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Protezione degli occhi: Indossare sempre occhiali protettivi quando si lavora con le batterie.
  • Ventilazione: Utilizzare il dispositivo in un'area ben ventilata.
  • Bambini: Tenere il dispositivo fuori dalla portata dei bambini.
  • Cortocircuiti: Non permettere il rosso e il nero clampche si tocchino tra loro o tocchino lo stesso oggetto metallico.
  • Polarità inversa: Ensure correct polarity connection (red to positive, black to negative) to avoid damage. The device includes reverse-polarity protection.
  • Umidità: Do not immerse the device in water. While it has an IP65 rating for water and dust resistance, it is not designed for submersion.
  • Danno: Non utilizzare il dispositivo se danneggiato. Contattare l'assistenza clienti per ricevere assistenza.
  • Temperatura: Do not expose the device to extreme heat or fire. Store within recommended temperature ranges.
LOKITHOR J3250 PRO with safety icons including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temp, high-temp, over-voltage, over-load, over-charge, and over-current protection.

The LOKITHOR J3250 PRO incorporates 10 safety protection technologies, including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temperature, high-temperature, over-voltage, over-load, over-charge, and over-current protection.

3. Prodotto finitoview

3.1 Cosa c'è nella scatola

  • Avviatore di emergenza LOKITHOR J3250 PRO
  • Jumper Starter Clamps
  • Cavo da USB-A a USB-C
  • Cavo da USB-C a USB-C
  • adattatore 12V
  • Borsa portaoggetti per accessori
  • Manuale d'uso
Contents of the LOKITHOR J3250 PRO box, including the jump starter unit, jumper cables, USB-A to USB-C cable, USB-C to USB-C cable, 12V adapter, storage bag, and manual.

Included components with the LOKITHOR J3250 PRO Jump Starter.

3.2 Caratteristiche principali

  • High Starting Current: Consegna 3250 Amp peak current for reliable vehicle starting.
  • Compatibilità motore: Suitable for gasoline engines up to 9.5 liters and diesel engines up to 7.5 liters.
  • Tecnologia della batteria LiFePO4: Offers over 2000 cycles at 100% depth of discharge, providing extended lifespan and enhanced chemical stability compared to traditional lead-acid or lithium-ion batteries.
  • Sicurezza avanzata: Features 10 types of protection, including spark-proof, mistake-proof, and reverse-polarity protection.
  • Ricarica rapida bidirezionale da 100 W: Recharges the unit in approximately 60 minutes and can provide power output for USB-C devices.
  • Tecnologia ConnectMax: Automatically detects clamp connection impedance to optimize starting efficiency.
  • Banca di alimentazione portatile: Provides 74.24Wh capacity with USB-A and USB-C outputs for charging phones, tablets, laptops, and other devices.
  • Torcia LED da 400 lumen: Includes multiple modes (constant, strobe, SOS) for emergency lighting.
  • Design durevole: IP65 waterproof and dustproof rating, designed to operate in temperatures from -4°F to 140°F (-20°C to 60°C).
  • Tempo di attesa prolungato: Maintains charge for up to 42 months (1260 days) with minimal self-discharge.
LOKITHOR J3250 PRO jump starter connected to a car battery, displaying 12 Volts, 3250A Peak, 50 Starts, 9.5L Gas, and 7.5L Diesel capabilities.

The J3250 PRO provides 3250A peak current, suitable for large engines.

LOKITHOR J3250 PRO jump starter being splashed with water and covered in dust, illustrating its IP65 waterproof and dustproof design.

The device features an IP65 rating for water and dust resistance.

4. Configurazione e ricarica

4.1 Carica iniziale

Before first use, fully charge the LOKITHOR J3250 PRO. This ensures optimal performance and extends battery life.

  1. Collegare il cavo USB-C-USB-C in dotazione alla porta di ingresso USB-C dell'avviatore di emergenza.
  2. Connect the other end of the USB-C cable to a 100W Power Delivery (PD) compatible wall charger (not included) or use the included 12V adapter.
  3. The display will show charging progress. A full charge typically takes about 60 minutes with a 100W PD charger.

4.2 Ricarica del dispositivo

It is recommended to recharge the jump starter after each use. If not used regularly, recharge the unit every 3-6 months to maintain battery health and readiness.

5. Istruzioni per l'uso

5.1 Avviamento di emergenza di un veicolo (modalità normale)

Use Normal Mode for vehicles with a partially discharged battery.

  1. Allega Clamps: Collegare il rosso (+) clamp to the positive terminal of the vehicle battery. Connect the black (-) clamp al polo negativo della batteria del veicolo.
  2. Accensione: Turn on the LOKITHOR J3250 PRO. The device will automatically detect the battery and prepare for jump starting.
  3. Avviare il veicolo: Avvia il veicolo.
  4. Spegnimento e scollegamento: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps dalla batteria del veicolo.
Four-step diagram showing how to jump start a car in normal mode: attach clamps, power on, start vehicle, power off and detach.

Steps for jump starting a vehicle using Normal Mode.

5.2 Avviamento di emergenza di un veicolo (modalità Boost)

Use Boost Mode for completely dead batteries where Normal Mode does not initiate a jump start.

  1. Allega Cl rossoamp: Collegare il rosso (+) clamp al terminale positivo della batteria del veicolo.
  2. Attiva Boost: Long press the 'Boost' button on the jump starter for more than 5 seconds. The display will indicate Boost Mode is active.
  3. Allega Cl neroamp: Collegare il nero (-) clamp al polo negativo della batteria del veicolo.
  4. Avviare il veicolo: Start your vehicle within 30 seconds of activating Boost Mode.
  5. Spegnimento e scollegamento: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps dalla batteria del veicolo.
Five-step diagram showing how to jump start a car in boost mode: attach red clamp, long press boost button, attach black clamp, start vehicle, power off and detach.

Steps for jump starting a vehicle using Boost Mode for completely dead batteries.

5.3 Utilizzo come power bank portatile

Il J3250 PRO può caricare vari dispositivi elettronici.

  • Connect your device to the USB-A output port (12V/1.5A, 18W QC) or the USB-C output port (20V/5A, 100W PD).
  • Il dispositivo inizierà automaticamente a caricarsi.
LOKITHOR J3250 PRO acting as a power bank, charging a smartphone, smartwatch, and tablet via its USB-A and USB-C ports.

The J3250 PRO can charge multiple electronic devices.

5.4 Utilizzo della torcia a LED

The integrated 400-lumen LED flashlight provides illumination and emergency signaling.

  • Premere una volta il pulsante della torcia per un'illuminazione costante.
  • Premere nuovamente per scorrere le modalità Strobo e SOS.
  • Premere una quarta volta per spegnere la torcia.
The LOKITHOR J3250 PRO's 400-lumen LED flashlight illuminating the words SOS, Strobe, and Flashlight.

The 400-lumen LED flashlight offers multiple modes for various situations.

6. Manutenzione

  • Ricaricare regolarmente: To prolong battery life, recharge the unit after each use. If stored, recharge every 3-6 months.
  • Magazzinaggio: Store the jump starter in a cool, dry place, away from direct sunlight and moisture. The device has a standby time of up to 42 months when fully charged.
  • Pulizia: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Clamp Cura: Garantire il clamps are clean and free of corrosion for optimal connection.
LOKITHOR J3250 PRO jump starter stored in a car trunk, with an icon indicating '42 Months Ultra-Long Standby Time'.

The J3250 PRO maintains charge for up to 42 months in standby.

7. Risoluzione Dei Problemi

If you encounter issues with your LOKITHOR J3250 PRO, refer to the following common troubleshooting steps:

  • Dispositivo non si accende: Ensure the device is charged. If the battery is completely depleted, charge it for at least 15-30 minutes before attempting to power on.
  • Vehicle Not Starting (Normal Mode):
    • Controllare che il clampsiano collegati saldamente ai terminali corretti della batteria (rosso al positivo, nero al negativo).
    • Ensure the vehicle battery terminals are clean and free of corrosion.
    • If the vehicle battery is completely dead, try using Modalità Boost.
  • Vehicle Not Starting (Boost Mode): Ensure the Boost Mode was activated correctly (long press for 5 seconds) and the vehicle was started within 30 seconds.
  • Clamps Sparking: This is normal if the clamps are connected incorrectly or if there is a poor connection. Ensure proper connection and clean terminals. The device has spark-proof protection.
  • Surriscaldamento del dispositivo: The device has high-temperature protection. If it feels excessively hot, disconnect it and allow it to cool down before further use.
  • Problemi di ricarica: Ensure the charging cable and adapter are functioning correctly and are compatible with 100W PD for fast charging.

Se i problemi persistono, contattare l'assistenza clienti LOKITHOR.

8. Specifiche

CaratteristicaSpecificazione
ModelloJ3250 PRO
Picco Amprabbia3250 Amps
Compatibilità del motore (benzina)Fino a 9.5 litri
Compatibilità del motore (diesel)Fino a 7.5 litri
Tipo di batteriaLiFePO4 (fosfato di ferro e litio)
Ciclo di vita della batteria2000+ Cycles (at 100% DoD)
Ingresso di ricaricaUSB-C PD 100W (5-20V/5A)
Uscita USB-C100 W (20 V/5 A)
Uscita USB-A18W QC (12V/1.5A)
DC Output12V/10A
Luminosità della torcia400 lumen
Dimensioni10.67 x 3.78 x 8.34 pollici
Peso6.39 libbre
Temperatura di esercizioDa -4°C a 140°C (da -20°F a 60°F)
Grado di protezione IPIP65 (impermeabile e antipolvere)
Tempo di standbyFino a 42 mesi
LOKITHOR J3250 PRO jump starter shown in a desert environment at 140°F and a snowy environment at -4°F, demonstrating its wide operating temperature range.

The J3250 PRO is designed to operate in a wide range of temperatures.

9. Garanzia e supporto

LOKITHOR products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official LOKITHOR webo contattare direttamente il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

If you have any after-sales questions, please feel free to contact us.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.