Technical Precision XBO 180W 45C OFR

Technical Precision Replacement Lamp Manuale di istruzioni

Model: XBO 180W 45C OFR

1. Introduzione

This manual provides essential information for the safe and effective use of your Technical Precision replacement lamp for the Sylvania XBO 180W 45C OFR. Please read these instructions carefully before installation and operation. Retain this manual for future reference.

2. Informazioni sulla sicurezza

  • Rischio elettrico: Always disconnect power to the equipment before attempting installation or removal of the lamp. Failure to do so can result in electric shock or injury.
  • Alta temperatura: Lampfunzionano ad alte temperature. Lasciare che lamp lasciare raffreddare completamente prima di maneggiarlo per evitare ustioni.
  • Componente fragile: Il lamp contains glass and delicate internal components. Handle with extreme care to avoid breakage. Do not touch the glass bulb directly with bare hands, as oils can reduce lamp vita. Utilizzare guanti o un panno pulito.
  • Protezione degli occhi: Non guardare direttamente la lamp when it is operating, as intense light can cause eye damage.
  • Disposizione: Smaltire l'usato lamps according to local regulations. Some lamps may contain materials that require special disposal procedures.

3. Prodotto finitoview

The Technical Precision XBO 180W 45C OFR is a high-quality replacement lamp designed to meet the specifications of the original Sylvania XBO 180W 45C OFR lamp. It is intended for use in compatible equipment requiring this specific lamp modello.

Technical Precision XBO 180W 45C OFR replacement lamp, davanti view con connettore

Figura 1: Fronte view of the Technical Precision XBO 180W 45C OFR replacement lamp, showing the bulb and attached electrical connector.

Questa sostituzione lamp presenta un wattage of 180W and operates at 14 Volts, producing a color temperature of 6200 Kelvin. Its average operational life is approximately 500 hours.

4. Configurazione e installazione

  1. Disconnessione dell'alimentazione: Ensure the equipment is completely powered off and unplugged from the main power source.
  2. Raffreddare: Se si sostituisce un esistente lamp, allow sufficient time for the old lamp to cool down completely before handling.
  3. Accesso Lamp vano: Refer to your equipment's original instruction manual for specific steps on how to safely access the lamp scomparto.
  4. Rimuovi la vecchia Lamp: Carefully disconnect any electrical connectors and unfasten the old lamp from its housing. Handle the old lamp with care, especially if it is broken.
  5. Installa nuova Lamp:
    • Wearing clean gloves or using a clean cloth, carefully remove the new Technical Precision lamp from its packaging. Avoid touching the glass bulb directly.
    • Allinea la lamp with its housing and gently insert it. Ensure it is seated correctly and securely.
    • Connect the electrical connector firmly.
  6. Scomparto sicuro: Close and secure the lamp compartment according to your equipment's manual.
  7. Accensione: Reconnect the equipment to the power source and power it on.
Avvicinamento view of the Technical Precision XBO 180W 45C OFR lamp's bulb element

Figura 2: primo piano view della lamp's bulb element, highlighting the delicate nature of the component.

5. Istruzioni per l'uso

Once installed, the Technical Precision XBO 180W 45C OFR lamp operates as part of your equipment. Refer to your equipment's instruction manual for specific operating procedures.

  • Accensione iniziale: Il lamp may require a brief warm-up period to reach full brightness and stable operation.
  • Periodo di raffreddamento: After turning off the equipment, allow a cool-down period before restarting. Frequent immediate restarts can reduce lamp vita.

6. Manutenzione

The Technical Precision replacement lamp is a sealed unit and does not require user maintenance beyond proper handling and timely replacement.

  • Pulizia: Do not attempt to clean the lamp bulb. If dust accumulates on the exterior housing or reflector, gently wipe with a dry, lint-free cloth after ensuring the lamp is cool and power is disconnected.
  • Sostituzione: Sostituisci la lamp when its brightness diminishes significantly or when it ceases to function. The average life is approximately 500 hours, but actual life may vary based on usage conditions.
  • Disposizione: Dispose of the used lamp responsibly. Consult local waste management authorities for proper disposal methods for high-intensity discharge lamps.
View of the electrical connector for the Technical Precision XBO 180W 45C OFR lamp

Figure 3: The electrical connector, which must be securely attached during installation.

7. Risoluzione Dei Problemi

ProblemaPossibile causaSoluzione
Lamp non si accende.
  • No power to equipment.
  • Lamp non installato correttamente.
  • Electrical connector loose.
  • Lamp ha raggiunto la fine della sua vita.
  • Equipment fault.
  • Check power supply to equipment.
  • Assicurare lamp è seduto in modo sicuro.
  • Verify electrical connector is firm.
  • Sostituisci lamp if it has exceeded its average life.
  • Consult equipment manual for further diagnostics.
Lamp è fioca o tremolante.
  • Lamp avvicinarsi alla fine della vita.
  • Alimentazione elettrica insufficiente.
  • Internal equipment issue.
  • Sostituisci lamp.
  • Check power connections and supply.
  • Consult equipment manual or qualified technician.

8. Specifiche

  • Modello: XBO 180W 45C OFR
  • Marca: Precisione tecnica
  • Cosatage: 180 Watt
  • Voltage: 14 Volt
  • Temperatura del colore: 6200 gradi Celsius
  • Vita media: 500 ore
  • Lunghezza lampadina: 3.54 pollici
  • Componenti inclusi: 1 x Replacement Lamp

9. Garanzia e supporto

For warranty information regarding your Technical Precision replacement lamp, please refer to the documentation provided at the time of purchase or contact the seller directly. Technical Precision is the manufacturer of this replacement part.

For technical support or inquiries, please contact the retailer or Technical Precision customer service through their official channels.