Introduzione
These DBPOWER Smart Jump Starter Clamps are designed as a replacement or upgrade for compatible DBPOWER 12V car jump starters. They feature an integrated LCD screen for real-time voltage display and incorporate multiple protection systems to ensure safe and reliable operation during vehicle jump-starting.
Safety Information and Protection Systems
Il jumper intelligente clamps are equipped with 8 protection systems to prevent common misoperations and ensure user safety. Always follow these guidelines when using the clamps.
Immagine: This diagram illustrates the eight built-in protection systems: Surge Voltage Protection, Overcurrent Protection, Reverse Polarity Protection, High Temperature Protection, High Voltage Protection, Short Circuit Protection, Over Discharge Protection, and Reverse Connection Protection. These features safeguard both the user and the vehicle's battery.
- Impulso voltage Protezione: Prevents damage from sudden voltage picchi.
- Protezione da sovracorrente: Protegge dal flusso di corrente eccessivo.
- Protezione da inversione di polarità: Avvisa e impedisce il funzionamento in caso di clamps are connected incorrectly to battery terminals.
- Protezione dalle alte temperature: Shuts down operation if the unit overheats.
- Alto volumetage Protezione: Protegge dal sovraccaricotage condizioni.
- Protezione da cortocircuito: Previene danni da cortocircuiti accidentali.
- Protezione da scarica eccessiva: Protects the jump starter battery from being excessively drained.
- Protezione della connessione inversa: Ensures correct connection to the vehicle battery.
Caratteristiche del prodotto
- Schermo LCD: Visualizza il volume della batteria in tempo realetage, eliminating the need for a separate voltmeter.
- Materiale durevole: Constructed with high-quality ABS material and full copper cables for stable and insulated performance.
- Maggiore sicurezza: Upgraded design for improved protection and reliability compared to older models.
Immagine: This image highlights the upgraded material design and the integrated LCD display of the DBPOWER Smart Jumper Clamp, contrasting it with a generic clamp lacking these features.
Immagine: Un dettagliato view of the DBPOWER Smart Jumper Clamps, emphasizing the LCD display and the robust construction designed for reverse polarity and short-circuit protection.
Compatibilità
These smart jumper clamps are specifically designed to be compatible with the following DBPOWER 12V car jump starter models:
- DBPOWER DJS80
- DBPOWER G15
- DBPOWER G16
Immagine: This image shows the DBPOWER Smart Jumper Clamps connected to different compatible DBPOWER jump starter units, including models DJS80, G15, and G16, demonstrating their intended use.
Istruzioni per l'uso
Steps to Jump Start Your Car
- Connect to the Jump Starter: Inserire la spina blu dello smart clamps into the corresponding port on your DBPOWER jump starter. Ensure a secure connection.
- Connetti Clamps alla batteria dell'auto: Collegare il polo positivo rosso (+) clamp to the positive (+) terminal of the car battery. Attach the black negative (-) clamp to the negative (-) terminal of the car battery. The LCD screen on the clamps will display the battery voltage.
- Avviare il motore dell'auto: Una volta che il clamps are correctly connected and the jump starter is ready (refer to your jump starter's manual for specific indicators), start your car's engine.
- Rimuovere il Clamps: After the car engine starts, immediately remove the clamps from the car battery, first the black negative (-) clamp, quindi il rosso positivo (+) clamp. Disconnect the clamps dall'avviatore di emergenza.
Immagine: This visual guide demonstrates the four steps for jump starting a car: 1. Connect the clamps to the jump starter. 2. Connect the clamps to the car battery. 3. Start the car engine. 4. Remove the clamps.
LCD Display Indicators and Troubleshooting
The integrated LCD screen provides important feedback during operation. Observe the display for status and error messages.
Immagine: This image displays the LCD screen of the smart clamps, showing various indicators such as current voltage (e.g., 13.0V), and error codes like LV (Low Voltage), HV (High Voltage), RC (Reverse Charge), SC (Short Circuit), HT (High Temperature), and Overload. These indicators assist in diagnosing issues during jump-starting.
| Indicatore | Senso | Azione |
|---|---|---|
| Voltage Display (e.g., 12.0V) | Volume attualetage della batteria del veicolo. | Proceed with jump start if voltage is low but within acceptable range for jump starting. |
| LV (Basso volume)tage) | Volume della batteria del veicolotage è troppo basso. | Ensure jump starter is fully charged. Check battery connections. |
| Alta tensione (alto volumetage) | Volume della batteria del veicolotage è troppo alto. | Do not attempt to jump start. Consult a mechanic. |
| RC (Reverse Charge) | Indicates reverse charging or incorrect connection. | Controllare clamp connections to battery terminals. Ensure red is to positive (+), black to negative (-). |
| SC (Short Circuit) | A short circuit has been detected. | Scollegare immediatamente clamps. Inspect cables and terminals for damage or improper contact. |
| HT (High Temperature) | il clamps or jump starter are overheating. | Disconnect and allow the unit to cool down before attempting further use. |
| Sovraccarico | Excessive current draw detected. | Ensure the vehicle's electrical system is not drawing too much power. Consult vehicle manual. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | F15A |
| Voltage | 12 Volt |
| Peso dell'articolo | 231 grammi |
| Materiale | High-quality ABS, Copper |
| Codice UPC | 840164806472 |
| Compatible Jump Starters | DBPOWER DJS80, G15, G16 |
Manutenzione e stoccaggio
- Conserva il clamps clean and dry. Wipe off any dirt, oil, or battery acid residue after each use.
- Ispezionare i cavi e clamps regularly for any signs of damage, fraying, or corrosion. Do not use if damaged.
- Conservare il clamps in a cool, dry place, away from direct sunlight and extreme temperatures.
- Garantire il clamps are disconnected from the jump starter and vehicle battery when not in use.
Assistenza clienti
For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your original DBPOWER jump starter unit or visit the official DBPOWER websito.