Manuale utente della telecamera di retromarcia GreenYi AHD 1080P

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your GreenYi AHD 1080P Backup Camera. Please read this manual thoroughly before use to ensure proper functionality and safety.

Figure 1: GreenYi AHD 1080P Backup Camera

2. Informazioni sulla sicurezza

This product contains small parts. Keep all components out of reach of children to prevent choking hazards.

3. Prodotto finitoview

3.1 Cosa c'è nella scatola

• Corpo macchina fotografica
• Two Camera Holders with Accessories
• 26.2FT Double-shielded Video Cable
• 5FT 4Pin to RCA Power Cable
• Many Others Installation Kits

Figure 2: Included components for the GreenYi AHD 1080P Backup Camera.

3.2 Caratteristiche principali

• AHD 1080P High Definition: 1920x1080 pixels resolution with AHD video signal for stable transmission and high clarity.
• 170 gradi Viewangolo di ing: Fornisce un ampio campo di view per ridurre al minimo i punti ciechi.
• Built-in Rotating Metal Camera Body: Allows for 360-degree rotation of the lens for optimal viewangoli di inclinazione.
• Grado di impermeabilità IP68: Ensures reliable operation in various weather conditions and during car washes.
• Three Switcher Cables: Customizable options for mirror image (rear view) to non-mirror image (front view), AHD to CVBS video signal, and turning guide lines on/off.
• Installazione versatile: Suitable for front, rear, or side view mounting with included accessories.

Figure 3: Comparison of AHD 1080P and 720P camera resolutions and viewangoli di inclinazione.

Figure 4: The camera features an IP68 waterproof design, suitable for all weather conditions.

4. Configurazione e installazione

4.1 Controllo di compatibilità

This AHD backup camera supports AHD 1080P 25HZ/PAL video signal format only. Ensure your monitor or head unit is compatible with this specific format. Some Android head units may have AHD settings but might not actually support AHD imaging. In such cases, you may need to use the CVBS video signal, which provides a resolution of 1280x720 and a 120-degree view angolo.

Figura 5: Esample of AHD video signal settings on a compatible head unit. Not all Android head units support AHD video signals, especially older models.

4.2 Schema elettrico

Refer to the diagram below for proper wiring connections. The camera can be connected to a head unit with or without a trigger wire, depending on your vehicle's setup.

Figure 6: Wiring diagram for connecting the backup camera to your vehicle's head unit or monitor.

4.3 Cable Switching Options

The camera features three switcher cables for customizing its functionality:

• Cavo bianco: Cut to switch from mirror image (default rear view) to non-mirror image (front view).
• Orange Cable: Cut to switch from AHD video signal (default) to CVBS video signal. This is necessary if your monitor only supports CVBS.
• Cavo verde: Cut to turn off the parking guide lines.

Importante: Always reconnect the power supply after cutting any cable. Cables can be reconnected if needed.

Figure 7: Illustration of the white, orange, and green switcher cables and their functions.

4.4 Installation Positions

The camera's 360-degree rotatable body and included accessories allow for flexible mounting in various positions:

• Front bumper/grille (front view)
• Rear deck lid/rear top/trunk handle/fender/5th wheel/tailgate (rear view)
• Below the side mirror or on the car body (side view)

An extra silicone shell is provided if you prefer not to drill a large hole for installation.

Figura 8: Esamples of various mounting locations for the camera, including front, rear, and side views.

4.5 Video di installazione

5. Istruzioni per l'uso

Once installed and properly connected, the camera will activate automatically when the vehicle is put into reverse (if wired to the reverse light trigger). The video feed will display on your compatible monitor or head unit. Adjust the camera's physical angle using the mini wrench provided to achieve the best view.

6. Manutenzione

The GreenYi AHD 1080P Backup Camera is designed with an IP68 waterproof rating, ensuring durability against water and dust. Regular cleaning of the lens with a soft, damp cloth is recommended to maintain optimal image clarity. Avoid using harsh chemicals or abrasive materials that could damage the lens or housing.

7. Risoluzione Dei Problemi

• Nessuna visualizzazione dell'immagine:
  • Verify your monitor/head unit supports AHD 1080P 25HZ/PAL. If not, cut the orange cable to switch to CVBS signal.
  • Check all wiring connections, ensuring they are secure and correctly matched according to the wiring diagram.
  • Assicurarsi che la fotocamera riceva alimentazione.
• Incorrect Image Orientation (e.g., mirrored for front view):
  • Cut the white cable to switch between mirror and non-mirror images.
• Guide Lines Not Appearing or Always On:
  • Cut the green cable to toggle the guide lines on or off.
• Scarsa qualità dell'immagine:
  • Assicurarsi che l'obiettivo della fotocamera sia pulito e privo di sporco o ostruzioni.
  • Confirm your monitor/head unit is set to the correct AHD 1080P 25HZ/PAL input.

8. Specifiche

9. Garanzia e supporto

The GreenYi AHD 1080P Backup Camera comes with a one-month money-back guarantee, two years new replacement warranty, and lifetime customer service. For support, please contact GreenYi customer service.