BRONC V8 Rotary Tattoo Machine User Manual

Informazioni importanti sulla sicurezza

This device is intended for professional use only. Always follow proper sterilization procedures and local health regulations. For external use only. Keep out of reach of children.

Contenuto della confezione

• Penna per tatuaggi BRONC V8
• Large Capacity Battery (pre-installed)
• Cavo di ricarica di tipo C.
• Adattatore RCA
• Custodia per il trasporto

Image: The BRONC V8 Tattoo Machine kit, showcasing the pen, its dedicated carrying case, and the included RCA adapter.

Prodotto finitoview

The BRONC V8 is a rotary tattoo machine designed for precision and efficiency. It features a coreless Swiss DC motor and offers dual-mode operation, allowing use with its built-in battery or via an RCA adapter. The machine includes a convenient button for presetting and switching between two voltage livelli.

Immagine: Un fronte dettagliato view of the BRONC V8 Rotary Tattoo Machine, highlighting its digital display and control interface.

Specifiche

Impostare

1. Installazione e ricarica della batteria

1. Assicurarsi che la macchina sia spenta.
2. Unscrew the battery cap at the bottom of the pen.
3. Inserire la batteria agli ioni di litio 18500 con il terminale positivo (+) rivolto verso l'interno.
4. Riavvitare saldamente il tappo della batteria.
5. To charge, connect the Type-C charging cable to the port on the machine and to a suitable USB power source. The display will indicate charging status.

2. Needle Cartridge Installation

1. Select a compatible needle cartridge.
2. Gently push the needle cartridge into the front opening of the machine until it clicks into place.
3. Ensure the cartridge is seated firmly and does not wobble.

3. Adjusting Needle Depth

Rotate the grip section of the machine clockwise or counter-clockwise to adjust the needle depth from 0mm to 5.0mm. The grip features a click mechanism for precise adjustments.

4. Using the RCA Adapter (Optional)

For wired operation, remove the battery cap and battery. Attach the RCA adapter to the bottom of the machine. Connect an RCA cable from the adapter to an external power supply.

Image: A hand demonstrating the proper grip on the BRONC V8 Tattoo Machine, with a needle cartridge installed.

Operazione

1. Accensione/Spegnimento

• To power on, press and hold the power button (usually the central button) until the display illuminates.
• Per spegnere, tenere premuto nuovamente il pulsante di accensione finché il display non si spegne.

2. Regolazione del volumetage

• Use the '+' and '-' buttons to increase or decrease the voltage.
• il volumetage output ranges from 4.5V to 11.0V. The recommended working voltage è 5.5 V-7.5 V.

3. Using Dual Voltage Presets

The BRONC V8 allows you to preset and quickly switch between two preferred voltages. Consult the specific button layout on your device for the preset function. Typically, a dedicated button or a long press on a voltage button activates this feature.

4. Switching Operation Modes

The machine can operate wirelessly with the built-in battery or wired using the RCA adapter and an external power supply. Switch between modes by either installing the battery or the RCA adapter as described in the Setup section.

Immagine: uno stile a raggi X view of the BRONC V8 Tattoo Machine, illustrating its internal coreless motor and electronic components.

Manutenzione

Pulizia

• Always disconnect the machine from any power source before cleaning.
• Pulire l'esterno della macchina con un panno pulito e asciutto.amp cloth and a mild, non-abrasive disinfectant.
• Non immergere la macchina in liquidi.
• Assicurarsi che tutte le superfici siano asciutte prima di riporle o di utilizzarle nuovamente.

Magazzinaggio

• Store the machine in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Se si conserva la batteria per lunghi periodi, rimuoverla per evitare che si scarichi.

Risoluzione dei problemi

La macchina non si accende

• Controllare la batteria: Assicurarsi che la batteria sia installata correttamente e completamente carica.
• Collegamento RCA: If using the RCA adapter, verify it is securely connected to both the machine and the power supply.

Voltage Not Adjusting

• Funzionalità dei pulsanti: Ensure the '+' and '-' buttons are pressed firmly.
• Ciclo di alimentazione: Try turning the machine off and on again.

Machine Vibrates Excessively or Makes Unusual Noise

• Needle Cartridge: Check if the needle cartridge is properly seated and not damaged. Replace if necessary.
• Problema interno: Se il problema persiste, interrompi l'utilizzo e contatta l'assistenza clienti.

Garanzia e supporto

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official BRONC websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.