1. Introduzione
This manual provides detailed instructions for the safe installation, operation, and maintenance of your LEDONE 8FT LED Vapor Tight Light. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for demanding environments requiring high resistance to water, dust, and corrosion, such as parking garages, car washes, cold storage, and industrial facilities.
2. Informazioni sulla sicurezza
ATTENZIONE: Rischio di scossa elettrica. Scollegare l'alimentazione prima dell'installazione o della manutenzione.
- L'installazione deve essere eseguita da un elettricista qualificato in conformità con il Codice elettrico nazionale (NEC) e le normative locali.
- Garantire la fornitura voltage is compatible with the fixture's requirements (120-277Vac).
- Do not handle energized fixtures with wet hands or while standing on wet or damp superfici.
- Non tentare di modificare o smontare l'apparecchio. All'interno non sono presenti parti riparabili dall'utente.
- Durante l'installazione indossare adeguati dispositivi di protezione individuale (DPI).
- Assicurarsi che l'apparecchio sia montato saldamente per evitare cadute.
3. Contenuto della confezione
Prima di procedere con l'installazione, verificare che tutti i componenti siano presenti e integri.
- LEDONE 8FT LED Vapor Tight Light Fixture
- Mounting Hardware (clips, screws, anchors)
- Manuale di istruzioni (questo documento)
4. Configurazione e installazione
4.1. Preinstallazione
- Spegnere l'alimentazione: Locate the circuit breaker or fuse box and turn off the power supply to the installation area. Verify power is off using a voltagetester.
- Disimballare: Carefully remove the fixture from its packaging. Inspect for any shipping damage.
- Seleziona Wattage and Color Temperature (CCT): Before mounting, adjust the wattage and CCT switches located on the fixture. These switches allow you to select between 60W, 80W, or 100W and 3500K, 4000K, or 5000K. Make your selection based on your lighting requirements.
Image: Product dimensions and location of wattage/CCT selection switches.
4.2. Montaggio dell'apparecchio
The fixture is designed for surface mounting. Use the provided mounting clips and hardware.
- Mark the desired mounting locations on the ceiling or wall. Ensure the marks are level and spaced appropriately for the fixture's length.
- Drill pilot holes at the marked locations. Insert wall anchors if mounting into drywall or masonry.
- Secure the mounting clips to the surface using the provided screws.
- Snap the LED vapor tight fixture into the mounted clips, ensuring it is firmly seated.
Immagine: Example of surface mounting in a facility.
Image: Detail of the linkable design feature.
4.3. Cablaggio elettrico
This fixture supports 0-10V dimming. Follow the wiring diagram below and local electrical codes.
- Collegare il Nero filo dall'apparecchio al Linea (L) filo dall'alimentatore.
- Collegare il Bianco filo dall'apparecchio al Neutro (N) filo dall'alimentatore.
- Collegare il Verde filo dall'apparecchio al Terra (GND) filo dall'alimentatore.
- For 0-10V dimming: Connect the Viola filo dall'apparecchio al Attenuato+ wire from the 0-10V dimmer. Connect the Rosa/Grigio filo dall'apparecchio al DIM- wire from the 0-10V dimmer.
- Assicurarsi che tutti i collegamenti siano sicuri utilizzando connettori per cavi adeguati.
Note: If 0-10V dimming is not used, cap the purple and pink/gray wires individually with wire nuts.
5. Istruzioni per l'uso
- Accensione: Once installation and wiring are complete, restore power to the circuit at the breaker or fuse box. The fixture should illuminate.
- dimming: If connected to a compatible 0-10V dimmer, adjust the dimmer control to achieve the desired light output level.
- Cosatage and CCT Adjustment: Cosatage and CCT are set via internal switches during installation. These are not typically adjusted during normal operation. If changes are needed, disconnect power before accessing the switches.
6. Manutenzione
The LEDONE Vapor Tight Light is designed for long-term, low-maintenance operation. Regular cleaning can help maintain optimal light output.
- Pulizia: Scollegare l'alimentazione prima della pulizia. Utilizzare un panno morbido eamp cloth with a mild, non-abrasive cleaner to wipe the exterior of the fixture. Do not use harsh chemicals or abrasive pads, as these can damage the finish or lens.
- Ispezione: Periodically inspect the fixture and mounting hardware for any signs of damage, loose connections, or wear. Address any issues promptly.
- Nessuna parte riparabile dall'utente: The LED light source and driver are integrated components. Do not attempt to open or repair the fixture. Contact qualified personnel for any issues beyond basic cleaning and inspection.
Image: The IP65 waterproof rating ensures durability in wet conditions.
7. Risoluzione Dei Problemi
Before performing any troubleshooting, ensure power is disconnected at the circuit breaker.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Fixture does not illuminate. | Nessuna alimentazione elettrica. Cablaggio errato. Apparecchio difettoso. |
Controllare l'interruttore automatico/il fusibile. Verify all wire connections are secure and correct. Contattare l'assistenza clienti se il cablaggio è corretto e l'alimentazione è presente. |
| L'emissione luminosa è troppo bassa o troppo alta. | Cosa non correttotage impostazione. Impostazione dimmer. Dimmer incompatibile. |
Verifica cosatage switch setting (power off). Adjust 0-10V dimmer. Assicurarsi che il dimmer sia compatibile con 0-10 V. |
| Sfarfallio di luce. | Collegamento del cablaggio allentato. Dimmer incompatibile. Fluttuazioni di potenza. |
Controllare tutti i collegamenti dei cavi. Assicurarsi che il dimmer sia compatibile con 0-10 V. Consultare un elettricista per verificare la stabilità dell'alimentazione elettrica. |
8. Specifiche
| Parametro | Valore |
|---|---|
| Modello | 8FT LED Vapor Tight Light |
| Marca | LEDONE |
| Cosatage | 60W / 80W / 100W (Selectable) |
| Temperatura del colore (CCT) | 3500K / 4000K / 5000K (selezionabile) |
| Ingresso volumetage | 120-277Vac |
| Oscuramento | Dimmerabile 0-10V |
| Flusso luminoso | Fino a 11442 lumen (a 100 W) |
| Angolo del fascio | 110° |
| Tutta la vita | 50,000 ore |
| Grado di protezione IP | IP65 (Waterproof and Dust-tight) |
| Certificazioni | UL Listed, DLC Listed, NSF Listed |
| Materiale dell'alloggiamento | PC Housing with White Cover |
| Materiale della lente | PC satinato |
| Dimensioni (L x P x A) | 95.98" x 2.61" x 2.42" (2438 mm x 66.4 mm x 61.4 mm) |
Image: Key features and certifications of the LEDONE Vapor Tight Light.
9. Informazioni sulla garanzia
LEDONE products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty. Please refer to the product packaging or the official LEDONE websito per termini e condizioni di garanzia specifici. Conservare la prova d'acquisto per eventuali reclami in garanzia.
10. Assistenza clienti
If you have any questions, require technical assistance, or need to report an issue, please contact LEDONE customer support:
- Websito: Visita lo Store LEDONE su Amazon (for general inquiries)
- E-mail: Fare riferimento alla confezione del prodotto o alle informazioni ufficiali websito per supporto diretto via email.
- Telefono: Fare riferimento alla confezione del prodotto o alle informazioni ufficiali websito per il numero di telefono dell'assistenza diretta.
Please have your product model number (8FT LED Vapor Tight Light) and proof of purchase ready when contacting support.