Rosewill CMG5 1000W Modular Power Supply User Manual

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your Rosewill CMG5 1000W Modular Power Supply. Please read this manual thoroughly before installation and retain it for future reference.

The Rosewill CMG5 1000W is a fully modular 80 PLUS Gold certified power supply designed for personal computers. It is compatible with ATX 3.0 & 3.1 standards and features a native 600W PCIe 5.0 / Gen 5 12+4 Pin 12V-2x6 cable, supporting modern high-performance graphics cards.

Immagine: Frontale view of the Rosewill CMG5 1000W Modular Power Supply, showing the fan grille and branding.

2. Informazioni sulla sicurezza

WARNING: Improper installation or use can lead to serious injury or equipment damage. Always follow these safety guidelines:

• Prima dell'installazione o della manipolazione, assicurarsi che l'alimentazione sia scollegata dalla presa di corrente CA.
• Non aprire l'alimentatore. Alto volumetagall'interno sono presenti componenti e non ci sono parti riparabili dall'utente.
• Install the power supply in a well-ventilated area. Do not block any ventilation openings.
• Use only the modular cables provided with this power supply. Using incompatible cables can damage the PSU and connected components.
• Ensure all cable connections are secure and fully seated to prevent electrical shorts or overheating.
• Evitare di esporre l'alimentatore a umidità o temperature estreme.
• If the power supply emits smoke, unusual odors, or loud noises, immediately disconnect it from the AC power and contact support.

3. Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

• Rosewill CMG5 1000W Modular Power Supply Unit
• Cavo di alimentazione CA
• Modular Cable Set (see below for details)
• Viti di montaggio
• Manuale dell'utente (questo documento)

Image: Rear panel of the Rosewill CMG5 1000W Power Supply showing the modular cable connection ports labeled for MB, CPU, PERIF/SATA, PCI-E 5.0, and PCI-E.

Set di cavi modulari:

Image: Diagram illustrating the types and lengths of modular cables included with the Rosewill CMG5 1000W Power Supply, including 24-pin Motherboard, 12+4-pin PCIe 5.0, 4+4-pin CPU, 6+2-pin PCIe, SATA, and 4-pin Molex connectors.

• 1x 24-pin Motherboard Cable (600mm)
• 1x 12+4-pin PCIe 5.0 Cable (600mm)
• 2x 4+4-pin CPU Cables (700mm each)
• 4x 6+2-pin PCIe Cables (500mm each, with two connectors per cable)
• 2x SATA Cables (500mm, with four SATA connectors per cable)
• 1x 4-pin Molex Cable (500mm, with four Molex connectors)

4. Configurazione e installazione

Follow these steps to install your Rosewill CMG5 1000W Power Supply:

1. Prepara il tuo sistema:
   • Spegnere il computer e scollegare il cavo di alimentazione CA dalla presa a muro.
   • Apri il case del computer.
   • Se si sostituisce un alimentatore esistente, scollegare tutti i cavi dal vecchio alimentatore e rimuoverlo dal case.
2. Installare l'alimentatore:
   • Carefully place the new Rosewill CMG5 1000W PSU into the power supply bay of your computer case.
   • Secure the PSU to the case using the provided mounting screws. Ensure the fan is facing the correct direction for optimal airflow (typically facing down if there's a bottom vent, or up if not).
3. Collegare i cavi modulari:
   • Identify the necessary cables for your components (Motherboard, CPU, PCIe, SATA, Molex). Refer to the "Package Contents" section for cable types.
   • Connect the required modular cables to the corresponding ports on the power supply unit. Ensure they click firmly into place.
   • Connect the other end of each cable to your motherboard, CPU, graphics card(s), storage drives, and other peripherals. Pay close attention to the orientation of each connector.
   • For PCIe 5.0 graphics cards, use the dedicated 12+4-pin PCIe 5.0 cable. Ensure it is fully inserted into both the PSU and the graphics card.
4. Controlli finali:
   • Double-check all cable connections to ensure they are secure. Loose connections can cause system instability or damage.
   • Organize cables to improve airflow within the case.
   • Chiudi il case del computer.
5. Accensione:
   • Collegare il cavo di alimentazione CA all'alimentatore e quindi a una presa a muro.
   • Flip the main power switch on the back of the PSU to the "ON" position.
   • Accendi il computer.

Immagine: Posteriore view of the Rosewill CMG5 1000W Power Supply, showing the AC power input, main power switch, and an "ECO" mode switch.

5. Istruzioni per l'uso

The Rosewill CMG5 1000W Power Supply is designed for reliable and efficient operation.

Eco Silent Mode:

• The power supply features an "ECO" mode switch located on the rear panel.
• When the ECO mode is ON, the 120mm Fluid Dynamic Bearing (FDB) fan will operate in a semi-fanless mode. The fan will remain off under low to moderate loads, providing silent operation. It will automatically spin up when the load increases to maintain optimal temperatures.
• When the ECO mode is SPENTO, the fan will operate continuously, adjusting its speed based on the internal temperature and load.
• Choose the mode that best suits your preference for noise levels and cooling performance.

Power Excursion Capabilities:

This power supply is designed to handle power excursions up to 235% and GPU power excursions up to 300%, ensuring stable power delivery during peak demands from high-performance components.

6. Manutenzione

Una corretta manutenzione garantisce la longevità e le prestazioni ottimali del tuo alimentatore.

• Pulizia: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use compressed air to gently clear dust from the fan blades and internal components. Ensure the PSU is powered off and unplugged before cleaning.
• Gestione dei cavi: Ensure cables are not obstructing airflow within your computer case. Re-route or tie cables as needed to maintain good ventilation.
• Condizioni ambientali: Utilizzare l'alimentatore in un ambiente pulito e asciutto, con adeguata ventilazione. Evitare temperature e umidità estreme.

7. Risoluzione Dei Problemi

Se riscontri problemi con l'alimentatore, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:

8. Specifiche

Immagine: Lato view of the Rosewill CMG5 1000W Power Supply, displaying the electrical specifications label including AC input, DC output voltages, and total output power.

9. Garanzia e supporto

Informazioni sulla garanzia:

The Rosewill CMG5 1000W Power Supply comes with a Garanzia del produttore di 5 anniLa presente garanzia copre i difetti di materiali e fabbricazione in condizioni di normale utilizzo. Si prega di conservare la prova d'acquisto per eventuali reclami in garanzia.

For detailed warranty terms and conditions, please refer to the official Rosewill websito o contattare il loro servizio clienti.

Assistenza clienti:

If you have any questions, require technical assistance, or need to initiate a warranty claim, please contact Rosewill customer support:

• Websito: Visit the official Rosewill websito per risorse di supporto, FAQ e informazioni di contatto.
• E-mail/Telefono: Refer to the Rosewill websito per i dettagli di contatto più aggiornati.

When contacting support, please have your product model (CMG1000G5) and proof of purchase readily available.