Manuale di istruzioni del sistema microfonico wireless UHF Pyle PDWM3100.5

Introduzione

The Pyle PDWM3100.5 UHF Wireless Microphone System provides clear sound reproduction for various applications. This system features a Bluetooth receiver with two rechargeable handheld microphones, offering flexibility and ease of use for home karaoke, classroom presentations, office meetings, and business applications. It incorporates advanced digital signal processing and infrared carrier-frequency synchronization for stable performance.

Caratteristiche principali:

• UHF 2x100 Channel Receiver with Digital Signal Processor
• High-fidelity Cartridge Module for clear audio
• Infrared Carrier-frequency Synchronization for easy setup
• Unique ID Address and Super Anti-Jamming Circuit Design
• Super-low Background Noise and Frequency Auto-Search
• Two rechargeable handheld microphones with 1200mAh batteries
• Semplice operazione plug-and-play

Cosa c'è nella scatola

The Pyle PDWM3100.5 UHF Wireless Microphone System package includes the following components:

• Unità ricevente
• (2) Microfoni palmari
• Adattatore di alimentazione (CC 12 V, 1 A)
• Linea di collegamento (39.37 pollici)
• (4) Rechargeable Batteries (NI-MH Battery, 1200mAh)
• (2) Silicone Antiskid Rings
• (2) Antenne

Figure 1: All components included in the Pyle PDWM3100.5 UHF Wireless Microphone System package.

Prodotto finitoview

Unità ricevente

Figure 2: Front panel features of the receiver unit.

1. Microphone Recharge Port: Insert microphones for recharging.
2. Schermo LCD: Shows system status, frequency, and battery levels.
3. Porta IR: Infrared carrier-frequency synchronization.
4. MIC 1 Selector Buttons: Controls LCD screen and functions for Microphone 1.
5. Pulsante di accensione: Premere per accendere / spegnere l'unità.
6. MIC 2 Selector Buttons: Controls LCD screen and functions for Microphone 2.

Figure 3: Rear panel connections of the receiver unit.

7. Alimentazione elettrica: DC 12V, 1A input.
8. VOL-A, VOL-B: Volume controls for Microphone A and Microphone B.
9. MIXED Output: Uscita audio combinata per entrambi i microfoni.
10. Antenna A/B BNC Socket: Connect antennas for signal reception.

Microfono palmare

Figure 4: Main functions of the handheld microphone.

• Testa del microfono: Cattura l'audio.
• Finestra di visualizzazione LCD: Mostra lo stato del canale e della batteria.
• Porta a infrarossi: Per la sincronizzazione con il ricevitore.
• Interruttore di alimentazione: Attiva/disattiva il microfono.
• Casa della batteria: Compartment for rechargeable batteries.
• Perno di ricarica: Connects to the receiver's recharge port for charging.

Istruzioni di installazione

1. Connetti il ​​ricevitore:
   • Connect the two antennas to the Antenna A/B BNC Sockets on the rear panel of the receiver.
   • Connect the Power Adapter (DC 12V, 1A) to the Power Supply port on the receiver and plug it into a power outlet.
   • Connect the receiver's MIXED Output to your amplifier, stereo, audio processor, or DJ mixer using the provided connecting line.
   

   Figure 5: Receiver connectivity options.

2. Installare le batterie del microfono:
   • Unscrew the bottom part of each handheld microphone to access the Battery House.
   • Insert the (2) provided NI-MH 1200mAh rechargeable batteries into each microphone, ensuring correct polarity.
   • Riavvitare saldamente la parte inferiore sul microfono.
   

   Figure 6: Rechargeable microphones and intelligent charging.
3. Accensione e sincronizzazione:
   • Press the Power Button on the receiver unit to turn it ON. The LCD display will illuminate.
   • Slide the Power Switch on each handheld microphone to the ON position. The microphone's LCD display will show its channel and battery status.
   • The microphones and receiver should automatically synchronize. If not, use the IR port on the receiver and the microphone's IR port to manually synchronize by aligning them and pressing the SYNC button on the receiver.
   

   Figure 7: UHF receiver range and microphone usage.

Istruzioni per l'uso

1. Regola volume: Use the VOL-A and VOL-B knobs on the receiver's rear panel to adjust the individual volume levels of Microphone A and Microphone B.
2. Utilizzo del microfono: Hold the microphone approximately 2-6 inches from your mouth for optimal sound quality. Avoid covering the microphone head with your hand to prevent muffled sound.
3. Frequency Adjustment (if needed): If you experience interference, use the selector buttons on the receiver to enter the frequency adjustment mode. Follow the on-screen prompts to auto-search for a non-interference frequency.
4. Microfoni di ricarica: When the microphone battery indicator is low, insert the microphone into the Microphone Recharge Port on the receiver. The receiver will intelligently charge the batteries. Charging time is approximately 10 hours for a full charge, providing over 7 hours of use.

Manutenzione

• Pulizia: Utilizzare un panno morbido e asciutto per pulire il ricevitore e i microfoni. Non utilizzare detergenti liquidi o materiali abrasivi.
• Magazzinaggio: Quando non in uso, conservare il sistema in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• Cura della batteria: Ensure batteries are fully charged before extended storage. Remove batteries if the system will not be used for a long period to prevent leakage.
• Cura dell'antenna: Maneggiare le antenne con cura per evitare piegature o rotture.

Risoluzione dei problemi

• Nessun suono:
  • Check if the receiver and microphones are powered ON.
  • Ensure microphones are synced with the receiver.
  • Verify volume levels on the receiver and connected audio device.
  • Check battery levels of microphones.
• Interferenze/scarsa qualità del suono:
  • Change the operating frequency on the receiver and microphones.
  • Assicurarsi che le antenne siano collegate e posizionate correttamente.
  • Allontanarsi da altri dispositivi wireless o da fonti di interferenza elettromagnetica.
  • Ensure microphones are within the specified operating range (164-262 ft).
• Microfono non in carica:
  • Ensure microphones are correctly inserted into the recharge ports.
  • Verify the receiver is powered ON.
  • Check if batteries are properly installed in the microphones.

Specifiche

Garanzia e supporto

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Pyle webluogo. Conserva la ricevuta di acquisto per eventuali richieste di garanzia.