Tyger Auto LanderX Running Board Installation Manual

1. Prodotto finitoview

The Tyger Auto LanderX Running Boards are designed to provide a secure and convenient step for entering and exiting your truck. Constructed from heavy-duty carbon steel with a textured black finish, these running boards offer durability and enhanced corrosion resistance. The unique triangular tubing design boosts structural strength, and the 5-inch drop ensures effortless access.

Image 1.1: Tyger Auto LanderX Running Boards. This image displays the pair of textured black running boards with their triangular tube structure and integrated drop steps.

2. Compatibilità e montaggio

These running boards are compatible with the following Crew Cab models:

• Modello Dodge Ram 2009 del 2018-1500
• Ram 2500 3500 del 2010-2026
• Ram 1500 Classic 2019-2024

Important Cab Size Note:

• Only fits Crew Cab models with 4 full-size doors.
• Not compatible with Quad Cab or Mega Cab models.
• Not compatible with Chassis Cab and Diesel models.
• Not compatible with 5th Gen 2019-UP Ram 1500.

Image 2.1: Crew Cab Compatibility Diagram. This diagram illustrates the difference between Quad Cab, Crew Cab, and Mega Cab configurations, highlighting that only Crew Cab (with 4 full doors) is compatible.

For 2009-2011 and some 2012 models, minor drilling of 1/4'' holes through the pinch weld may be required for support brackets.

3. Elenco delle parti

Prima di iniziare l'installazione, assicurarsi che tutti i componenti siano presenti:

• Driver Side Running Board (1)
• Passenger Side Running Board (1)
• Mounting Brackets (Set for driver and passenger sides)
• All necessary hardware (bolts, washers, nuts)
• Guida all'installazione (questo manuale)

Refer to the detailed parts diagram in the included paper instruction manual for specific quantities and types of hardware.

4. Strumenti richiesti

Per l'installazione sono solitamente necessari i seguenti strumenti:

• Socket Wrench Set
• Chiave dinamometrica
• Drill (for specific models, as noted in compatibility)
• Nastro di misurazione
• Occhiali di sicurezza
• Guanti

5. Istruzioni per l'installazione

It is recommended to have a second person assist with the installation due to the size and weight of the running boards.

Passaggio 5.1: preparare il veicolo

1. Parcheggiare il veicolo su una superficie piana e livellata e inserire il freno di stazionamento.
2. Locate the factory mounting points along the rocker panel of your truck. These are typically threaded holes.
3. For 2009-2011 and some 2012 models, if necessary, drill 1/4'' holes through the pinch weld for additional support brackets.

Passaggio 5.2: installare le staffe di montaggio

1. Identify the correct mounting brackets for each position (front, middle, rear) on both the driver and passenger sides. Refer to the paper manual for specific bracket identification.
2. Attach the brackets to the vehicle's frame using the provided hardware. Hand-tighten all bolts initially to allow for adjustment.

Step 5.3: Attach Running Boards

1. Carefully lift one running board and align it with the installed mounting brackets.
2. Secure the running board to the brackets using the remaining hardware. Again, hand-tighten all bolts.
3. Adjust the position of the running board to ensure it is level and properly aligned with the vehicle.

Fase 5.4: serraggio finale

1. Once satisfied with the alignment, fully tighten all bolts on both the brackets and the running boards. Refer to the paper manual for specific torque specifications.
2. Ripetere l'intero procedimento per il lato opposto del veicolo.

Image 5.2: Heavy-Duty Steel Brackets. This image shows the robust steel brackets with pre-drilled threaded holes designed for secure and easy installation onto the vehicle's frame.

6. Manutenzione

To ensure the longevity and appearance of your Tyger Auto LanderX Running Boards, follow these maintenance guidelines:

• Pulizia regolare: Wash the running boards regularly with mild soap and water to remove dirt, road salt, and debris. Avoid abrasive cleaners or harsh chemicals that could damage the textured black finish.
• Ispezionare l'hardware: Periodically check all mounting hardware for tightness. Vibrations from driving can sometimes loosen bolts over time. Re-tighten as necessary.
• Controllare eventuali danni: Inspect the running boards for any signs of damage, such as dents, scratches, or corrosion. Address any issues promptly to prevent further deterioration.
• Rivestimento protettivo: Il doppio-stage E-coating powder textured black finish provides excellent rust and corrosion resistance. Avoid scratching this coating to maintain protection.

7. Risoluzione Dei Problemi

If you encounter any issues during or after installation, consider the following:

• Running Board Not Level: Loosen the mounting bolts, adjust the running board's position until level, and then re-tighten all hardware securely.
• Vestibilità ampia: Ensure all bolts are fully tightened to the recommended torque specifications. Check that the correct brackets are used for each mounting point.
• Parti mancanti: If any parts are missing from your package, contact Tyger Auto customer support immediately.
• Problemi di montaggio: Double-check your vehicle's make, model, and cab type against the compatibility section (Section 2). Ensure you have a Crew Cab model.

8. Specifiche

Image 8.1: Product Dimensions Diagram. This image provides a visual representation of the running board's length, width, and height.

9. Garanzia e supporto

Tyger Auto backs this product with a 5-year warranty for US customers against manufacturing defects. For warranty claims, technical assistance, or any questions regarding your LanderX Running Boards, please contact Tyger Auto customer support through their official websito o rivenditore presso cui è stato acquistato il prodotto.

Conservare la prova d'acquisto per la convalida della garanzia.