1. Introduzione
This manual provides instructions for the LOOM TREE 2.4G Bluetooth Controller JR1807Rxs Receiver, designed for use with children's electric ride-on cars. Please read this manual carefully before installation and operation to ensure correct usage and optimal performance.
2. Contenuto della confezione
Il pacchetto include i seguenti componenti:
- Optional Remote Controller or 12V Receiver (depending on your purchase)
Note: This product is suitable for specific children's riding toys. Ensure that the purchased parts have the same appearance and model as your existing parts.
3. Configurazione e installazione
3.1. Installazione della batteria del telecomando
The remote controller requires two AAA batteries (not included). Follow these steps to install the batteries:
- Individuare il vano batterie sul retro del telecomando.
- Aprire il coperchio del vano batterie.
- Inserire due batterie AAA, assicurandosi della corretta polarità (+/-).
- Chiudere saldamente il coperchio del vano batterie.
Immagine: Indietro view of the remote controller, highlighting the battery compartment. Ensure batteries are inserted with correct polarity.
3.2. Frequency Matching (Pairing)
The remote controller and receiver must be paired before first use or after replacing the remote's batteries. This process establishes a connection between the remote and the electric ride-on car.
- Ensure the electric ride-on car is powered OFF.
- On the remote controller, simultaneously press and hold the Inoltrare E Inversione buttons. The indicator light on the remote will begin to flash.
- While still holding the buttons on the remote, turn ON the power of the electric ride-on car.
- The remote's indicator light will stop flashing, indicating a successful connection.
- Rilasciare il Inoltrare E Inversione buttons. The remote control is now ready for use.
Immagine: Frontale view of the remote controller, showing the layout of the control buttons including Forward and Reverse.
4. Funzionamento
After successful frequency matching, the remote controller can be used to operate the electric ride-on car. The buttons on the remote typically control movement (forward, reverse, left, right), speed, and other functions depending on the specific car model.
- Use the directional controls (joysticks/buttons) to steer the car.
- Premere il tasto Inoltrare button to move the car forward.
- Premere il tasto Inversione button to move the car backward.
- Additional buttons may control speed, horn, music, or lights, depending on the car's features. Refer to your electric car's manual for specific button functions.
5. Manutenzione
To ensure the longevity and proper functioning of your remote controller and receiver, follow these maintenance guidelines:
- Pulizia: Wipe the remote controller and receiver with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Magazzinaggio: Conservare il prodotto in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
- Cura della batteria: Rimuovere le batterie dal telecomando se non si prevede di utilizzarlo per un periodo prolungato, per evitare perdite.
- Evitare l'umidità: Keep the remote controller and receiver away from water and other liquids to prevent damage.
6. Risoluzione Dei Problemi
If you encounter issues with your LOOM TREE 2.4G Bluetooth Controller JR1807Rxs Receiver, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Remote not controlling the car. | Not paired correctly or batteries are low/dead. |
|
| Remote indicator light keeps flashing. | Frequency matching failed. | Repeat the frequency matching process carefully (see Section 3.2). Ensure the car is turned on while holding the remote buttons. |
| Controllo intermittente. | Interferenza o batteria scarica. |
|
7. Specifiche
| Numero di modello | JR1807Rxs (LTIN61048384) |
| Materiale | Plastica |
| Dimensioni del telecomando | 14 x 8 x 2.5 cm (5.51 x 3.15 x 0.98 pollici) |
| Receiver Dimensions (1816) | 7.5 x 3 x 8 cm (2.95 x 1.18 x 3.15 pollici) |
| Receiver Dimensions (JR1816) | 7.6 x 8 x 3 cm (2.99 x 3.15 x 1.18 pollici) |
| Receiver Dimensions (Red Chip 12V) | 9 x 8 x 3 cm (3.54 x 3.15 x 1.18 pollici) |
| Fonte di alimentazione (remota) | 2 x batterie AAA (non incluse) |
| Età consigliata | 5 - 15 anni |
| Paese di origine | Hong Kong |
Image: Remote controller with approximate dimensions (14cm length, 8cm width, 2.5cm height) indicated.
8. Garanzia e supporto
For product support, inquiries, or warranty information, please contact the manufacturer:
- Produttore: CREATIONIAT TECHNOVATION PRIVATE LIMITED
- Assistenza clienti: +91-9311494802
- E-mail: creationisttechnovation@gmail.com
This product is covered by a 10-day replacement policy. Please refer to your purchase documentation for full details.