MIAOKE Portable Blender User Manual

Introduzione

This manual provides essential instructions for the safe and efficient use of your MIAOKE Portable Blender. Please read it thoroughly before first use and keep it for future reference.

The MIAOKE Portable Blender is designed for preparing shakes, smoothies, and juices on the go. It features a powerful 7.4V motor, six food-grade stainless steel blades, a 350ml capacity, and a 3000mAh rechargeable battery with USB-C fast charging.

Componenti del prodotto

Familiarize yourself with the main parts of your portable blender.

Image: Labeled diagram showing the blender's parts including non-slip cup covers, portable silicone handle, PCTG 350ml bottle, six-blade 304 food-grade blades, 3000mAh battery, non-slip rubber bottom, and LED display.

• Non-slip Cup Covers: Securely seals the blender.
• Maniglia portatile in silicone: Per un facile trasporto.
• PCTG 350ml Bottle: Main blending container.
• Six-blade 304 Food-Grade Blades: Per una miscelazione efficiente.
• Batteria ricaricabile da 3000 mAh: Alimenta il frullatore.
• Non-slip Rubber Bottom: Fornisce stabilità.
• Display a LED: Shows battery level and blending countdown.

Installazione e primo utilizzo

1. Carica iniziale: Before first use, fully charge the blender. Connect the USB-C charging cable to the blender's port and a suitable USB power source (e.g., charging adapter, power bank, laptop, car charger). The LED display will indicate charging status. A full charge takes approximately 3-5 hours and provides 15-20 blending cycles.


Image: Illustration of various charging methods for the MIAOKE Portable Blender, including wall adapter, power bank, laptop, and car charger.

2. Pulizia iniziale: Wash the bottle and lid with warm soapy water. Ensure the blade area is clean. Do not immerse the motor base in water.
3. Montaggio: Ensure the bottle is securely twisted onto the motor base. The LED display should show "88" blinking three times to indicate it is safely locked and ready for operation.

Istruzioni per l'uso

Per preparare le vostre bevande, seguite questi passaggi:

1. Preparare gli ingredienti: Cut fruits and vegetables into small pieces, approximately 1-2 cm (0.4-0.8 inches).
2. Aggiungere gli ingredienti: Place the prepared ingredients into the blender bottle. Do not fill more than half of the bottle with solid ingredients.
3. Aggiungere liquido: Pour water, milk, or other liquids into the bottle. The total volume of ingredients (solids + liquids) should not exceed 2/3 of the bottle's capacity.
4. Coperchio sicuro: Ensure the lid is tightly closed and the bottle is securely locked onto the base. The LED display should confirm readiness.
5. Inizia la miscelazione: Double-click the power button to start the blending cycle. The LED display will show a 30-second countdown.
6. Agitare delicatamente: For optimal blending, gently shake the blender up and down, and left and right, 6-10 times during the cycle.
7. Godere: Once the blending cycle is complete, open the lid and enjoy your freshly prepared drink.

Image: Step-by-step visual guide showing how to cut fruit, add to blender, add liquid, double-click to start, shake, and finally enjoy the blended drink.

The blender is suitable for various preparations:

Immagine: Visual examples of beverages that can be made with the blender, including baby food, fruit juice, milkshakes, smoothies, and protein shakes.

Manutenzione e pulizia

Proper maintenance ensures the longevity of your blender.

• Cleaning the Bottle and Lid: The bottle and lid are dishwasher safe. Alternatively, they can be washed by hand with warm soapy water.
• Cleaning the Blade Area: For easy cleaning, add a small amount of water and a drop of dish soap to the bottle, secure the lid, and run a short blending cycle. Rinse thoroughly.
• Pulizia della base motore: Pulisci la base del motore con un adamp stoffa. Do not immerse the motor base in water to prevent damage to electronic components.
• Magazzinaggio: Quando non lo si utilizza, conservare il frullatore in un luogo pulito e asciutto.

Risoluzione dei problemi

Fare riferimento ai seguenti problemi comuni e alle relative soluzioni:

Notes & Common Code Solutions

Image: Visual guide displaying LED codes F3, F2, and 88 with corresponding troubleshooting steps.

1. Issue: Blender does not start, LED displays "F3".

   Soluzione: The bottle is not completely locked. Tighten the bottle onto the base until the LED screen displays "88" blinking three times. Then, double-click the power button to start normally.

2. Issue: Blender stops after six consecutive uses, LED displays "F2".

   Soluzione: This indicates an automatic overload protection. To protect the juicer, it will enter a stationary state. Wait for five minutes for automatic recovery before attempting to use it again.
3. Issue: Blender stops during operation, LED displays "88" then turns off.

   Soluzione: This occurs if the blade is jammed by overly large fruit pieces. The motor enters a blocking state, and the line protection program starts, blocking for 3 seconds. The digital tube display "88" will automatically extinguish within 3 seconds. Remove the obstruction, ensure ingredients are cut small, and restart.

Specifiche

Garanzia e supporto

Your MIAOKE Portable Blender comes with a Garanzia di 12 mesi dalla data di acquisto, coprendo i difetti di fabbricazione.

If you encounter any problems during the use of your MIAOKE portable blender, please contact our customer service team. We are available 24 hours a day to provide a satisfactory solution.

For support, please refer to the contact information provided with your purchase or visit the official MIAOKE websito.