PDP REMATCH GLOW Wireless Controller for Nintendo Switch

Introduzione

This manual provides instructions for the setup, operation, and maintenance of your PDP REMATCH GLOW Wireless Controller for Nintendo Switch. This controller is designed to enhance your gaming experience with its wireless connectivity, extended battery life, and customizable features.

Davanti view of the PDP REMATCH GLOW Wireless Controller, showcasing the Super Mario Icon design in black and red.

Caratteristiche

• Connettività wireless: Enjoy gaming with a 30-foot wireless range via Bluetooth.
• Batteria ricaricabile: Built-in battery provides up to 40 hours of play time on a single charge.
• Design fosforescente: Unique Super Mario Icon design glows in the dark after exposure to light.
• Dual Programmable Back Buttons: Customize your gameplay by assigning additional functions to the two back buttons for faster in-game actions.
• Design ergonomico: Engineered for comfort during extended gaming sessions.
• Licenza ufficiale: This product is officially licensed by Nintendo.

Impostare

1. Ricarica iniziale

Before first use, fully charge the controller. Connect the included USB-C cable to the charging port on the controller and the other end to a USB power source (e.g., Nintendo Switch dock, USB wall adapter). The LED indicators on the controller will show charging status.

The USB-C port for charging the controller.

2. Abbinamento con Nintendo Switch

1. Dal menu HOME di Nintendo Switch, seleziona Controllori, Poi Cambia impugnatura/ordine.
2. Sul controller, tieni premuto il tasto Pulsante di sincronizzazione (located on the top edge, near the charging port) for at least 3 seconds. The player LEDs will begin to flash.
3. Una volta accoppiato, i LED del giocatore corrispondenti al numero del controller rimarranno accesi.

Istruzioni per l'uso

Controlli di base

The controller features standard Nintendo Switch button layouts, including A, B, X, Y buttons, directional pad, left and right analog sticks, ZL/ZR and L/R shoulder buttons, and Home, Capture, Plus, and Minus buttons.

Dettagliato view of the controller's D-pad and action buttons.

Pulsanti posteriori programmabili

The controller includes two programmable back buttons. These can be assigned to replicate other button functions for quick access during gameplay.

1. Premere e tenere premuto il tasto Pulsante del programma (located on the back of the controller) until the LED indicator begins to flash.
2. Press the button you wish to map (e.g., A, B, X, Y, L, R, ZL, ZR, etc.).
3. Press the desired programmable back button (P1 or P2) to assign the function. The LED indicator will stop flashing, confirming the mapping.
4. To clear a mapped button, press and hold the Pulsante del programma until the LED flashes, then press the programmable back button you wish to clear twice.

Posteriore view of the controller, highlighting the programmable back buttons.

Funzione Glow-in-the-Dark

The Super Mario Icon design on the controller will glow in the dark after being exposed to a light source. For optimal glow, expose the controller to bright light for several minutes.

The controller's design illuminated in a dark environment.

Manutenzione

Pulizia

To clean the controller, use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials, as these may damage the surface or internal components.

Magazzinaggio

Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, ensure the controller is fully charged to maintain battery health.

Risoluzione dei problemi

Il controller non si connette

• Assicurati che il controller sia carico.
• Verify the Nintendo Switch is updated to the latest system software.
• Attempt to re-pair the controller by following the "Pairing with Nintendo Switch" steps.
• If issues persist, try resetting the controller by inserting a small pin into the reset hole on the back of the controller.

Buttons or Analog Sticks Not Responding

• Check for any physical obstructions around the buttons or sticks.
• Ensure the controller is fully charged and properly connected/paired.
• Perform a controller calibration through the Nintendo Switch system settings (System Settings > Controllers and Sensors > Calibrate Control Sticks / Calibrate Gyroscope Controls).

Specifiche

Garanzia e supporto

Informazioni sulla garanzia

Performance Designed Products, LLC (“PDP”) warrants to the original consumer purchaser of the product that our product will be free from defects in materials and/or workmanship, depending on the product type, for a period of between ninety (90) days and five (5) years (and as may be further specified on the product’s packaging), beginning from the date of original purchase of the product. If a defect covered by this warranty occurs during this period, PDP at its option will repair or replace, at no charge, any part that PDP determines to be defective. A proof of purchase will be required to obtain warranty services; therefore a saved receipt will be necessary. If you have lost your receipt, most reputable retailers will be able to reissue a receipt for you.

Assistenza clienti

For further assistance or technical support, please refer to the official PDP websito web o contattare direttamente il servizio clienti. Le informazioni di contatto si trovano in genere sulla confezione del prodotto o sul cartellino del produttore. websito.