Introduzione
This manual provides essential information for the installation, operation, and maintenance of your EK-Quantum Impulse 120 D-RGB fan. This fan is designed for silent operation and features sophisticated addressable D-RGB lighting.
Informazioni sulla sicurezza
- Scollegare sempre l'alimentazione dal computer prima dell'installazione o della manutenzione.
- Maneggiare i componenti con cura per evitare danni.
- Garantire un'adeguata messa a terra per evitare scariche elettrostatiche.
- Tenere fuori dalla portata dei bambini.
- Do not attempt to modify the fan or its components.
Contenuto della confezione
Verifica che tutti gli articoli siano presenti nel tuo pacco:
- 1x EK-Quantum Impulse 120 D-RGB Fan
- 1x Cable extender (PWM+RGB)
- 4x Self-tapping fan screws (7/32'')
Immagine: Frontale view of the EK-Quantum Impulse 120 D-RGB fan, featuring its white frame, translucent blades, and the EK logo prominently displayed in the center.
Configurazione e installazione
1. Preparare il sistema
Before beginning installation, ensure your computer is powered off and disconnected from the mains electricity. Open your computer case to access the fan mounting locations.
2. Montare la ventola
Position the EK-Quantum Impulse 120 D-RGB fan in your desired location (e.g., case fan mount, radiator). Use the four included self-tapping fan screws to secure the fan. Ensure the fan is oriented correctly for optimal airflow (intake or exhaust).
Image: Technical drawing illustrating the dimensions and mounting points of the EK-Quantum Impulse 120 D-RGB fan, including top and side views con misure in millimetri.
3. Connect Power and D-RGB
The fan features a micro-fit 8-pin connector. Use the provided 500mm extender cable to connect the fan to your motherboard or fan controller.
- Connessione PWM: Connect the 4-pin PWM header from the extender cable to an available 4-pin fan header on your motherboard or fan controller. This allows for speed control.
- D-RGB Connection: Connect the 3-pin Addressable 5V D-RGB header from the extender cable to a compatible 3-pin 5V D-RGB header on your motherboard or D-RGB controller. Ensure the voltage is 5V; connecting to a 12V RGB header will damage the LEDs.
Immagine: dall'alto verso il basso view of the EK-Quantum Impulse 120 D-RGB fan, showcasing its vibrant D-RGB lighting in a pink hue against a dark background.
Istruzioni per l'uso
Controllo della velocità della ventola (PWM)
The fan speed can be controlled via Pulse Width Modulation (PWM) through your motherboard's BIOS/UEFI settings or dedicated fan control software. The fan operates within an RPM range of 400 to 1800 RPM.
D-RGB Lighting Control
The addressable D-RGB lighting requires a compatible 5V D-RGB controller or motherboard software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). Refer to your motherboard or controller manual for specific instructions on how to customize the lighting effects.
Immagine: Angolata view of the EK-Quantum Impulse 120 D-RGB fan, displaying its illuminated D-RGB lighting with a gradient of pink and purple colors.
Manutenzione
Pulizia
To maintain optimal performance and aesthetics, periodically clean your fan. Disconnect power before cleaning.
- Use a soft, dry cloth or a can of compressed air to remove dust from the fan blades and frame.
- Do not use harsh chemicals or abrasive materials, as these can damage the fan's surface or LEDs.
- Ensure the fan is completely dry before reconnecting power.
Risoluzione dei problemi
La ventola non gira
- Controllare la connessione di alimentazione: Ensure the 4-pin PWM connector is securely attached to a functional fan header on your motherboard or controller.
- Impostazioni BIOS/Software: Verify that the fan header is enabled and configured correctly in your motherboard's BIOS/UEFI or fan control software.
- Minimum RPM: Some fan headers have a minimum RPM threshold. Ensure the fan speed setting is above the minimum operating RPM (400 RPM).
D-RGB Lighting Not Working
- Check D-RGB Connection: Ensure the 3-pin 5V D-RGB connector is securely attached to a compatible 5V D-RGB header. Non collegare a un connettore RGB da 12 V.
- Controllo software: Verify that your motherboard's D-RGB software or external controller is properly installed and configured.
- Alimentazione elettrica: Ensure your system's power supply can adequately power all connected D-RGB devices.
Specifiche
| Caratteristica | Specificazione |
|---|---|
| Modello | EK-Quantum Impulse 120 D-RGB |
| Dimensioni | 120mm x 120mm x 29mm (26mm without rubber dampener) |
| Gamma RPM | 400 - 1800 giri/min |
| Volume nominaletage | 12V |
| Power Draw (Fan) | 1.44 W (0.12 A) |
| Power Draw (LED) | 2.3 W (0.45 A) |
| Ciclo di lavoro PWM | 25-100% |
| Cuscinetto dell'albero | VAPO |
| Bearing Durability | 60,000 hrs at 40°C |
| Flusso d'aria massimo | 57.5 CFM (97.8 m³/ora) |
| Pressione statica | 1.94 mm-H2O |
| Livello di rumore | 24.3 dBA (max. RPM) |
| Lunghezza cavo ventola | 100mm |
| Extender Cable Length | 500mm |
Informazioni sulla garanzia
This EK-Quantum Impulse 120 D-RGB fan comes with a one-year manufacturer's warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, unauthorized modifications, or accidents.
Supporto
For technical assistance, troubleshooting, or warranty inquiries, please visit the official EK website or contact EK customer support.
Negozio ufficiale EK: Negozio EK su Amazon