OCOOPA UT3 Lite

OCOOPA UT3 Lite Magnetic Rechargeable Hand Warmers

Manuale di istruzioni

1. Introduzione

Thank you for choosing the OCOOPA UT3 Lite Magnetic Rechargeable Hand Warmers. These portable electric hand warmers are designed to provide warmth and comfort in cold conditions. Featuring a magnetic 2-in-1 design, three adjustable heat settings, and USB-C recharging, they are ideal for various outdoor activities and daily use. Please read this manual thoroughly before use to ensure safe and optimal performance.

2. Contenuto della confezione

  • 2 x OCOOPA UT3 Lite Hand Warmers
  • 1 cavo di ricarica USB-C doppio
  • 2 x Wrist Lanyards
  • 1 x Custodia portatile
  • 1 x Manuale utente

3. Caratteristiche del prodotto

  • Design magnetico 2 in 1: Two individual hand warmers can be used separately or magnetically combined for a larger heating surface.
  • Impostazioni di calore regolabili: Three distinct heating levels provide warmth up to 126°F (53°C).
  • Riscaldamento rapido: Delivers warmth within seconds of activation.
  • Calore duraturo: Provides up to 8 hours of continuous heat on the lowest setting.
  • Ultra-portatile: Each unit weighs approximately 65g and is 1.55cm thick, designed to fit comfortably in pockets or gloves.
  • Sicurezza certificata UL: Equipped with an intelligent temperature control chip for safe operation.
  • USB-C ricaricabile: Si ricarica comodamente tramite il cavo USB-C incluso.

4. Informazioni sulla sicurezza

The OCOOPA UT3 Lite Hand Warmers are UL certified, ensuring adherence to high safety standards. Always use the product as directed in this manual. Do not expose the device to extreme temperatures or direct sunlight for prolonged periods. Keep out of reach of children. Do not puncture, disassemble, or modify the device. Discontinue use if the device becomes excessively hot, emits smoke, or shows signs of damage.

5. Istruzioni per la ricarica

  1. Connect the included dual USB-C charging cable to the charging port on each hand warmer.
  2. Collegare l'altra estremità del cavo a una fonte di alimentazione USB compatibile (ad esempio, adattatore da parete, computer, power bank).
  3. The indicator lights will illuminate to show charging status. A full charge typically takes approximately 3.5 hours.
  4. Once fully charged, disconnect the hand warmers from the power source.

Each hand warmer must be charged separately using its dedicated USB-C port.

6. Istruzioni per l'uso

Accensione/spegnimento

  • To power on, press and hold the power button for 3 seconds. The indicator lights will illuminate.
  • To power off, press and hold the power button for 3 seconds. The indicator lights will turn off.

Regolazione delle impostazioni di calore

Once powered on, short press the power button to cycle through the three heat settings:

  • Livello 1 (Basso): One indicator light (approx. 100-108°F)
  • Livello 2 (Medio): Two indicator lights (approx. 109-117°F)
  • Livello 3 (Alto): Three indicator lights (approx. 118-125°F)
OCOOPA UT3 Lite hand warmers showing three heat settings with corresponding temperature ranges.

Image: OCOOPA UT3 Lite hand warmers illustrating the three heat settings and their respective temperature ranges.

Magnetic Functionality

The two hand warmers can be magnetically attached to form a single, larger heating unit. Simply bring the flat sides of the two units together, and they will snap into place. This allows for flexible use, either as two separate warmers or one combined unit for increased warmth.

Two OCOOPA UT3 Lite hand warmers magnetically attaching to each other.

Image: Demonstrating the magnetic attachment feature of the OCOOPA UT3 Lite hand warmers.

7. Cura e manutenzione

  • Clean the surface of the hand warmers with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
  • Store the hand warmers in the provided portable pouch when not in use to protect them from scratches and dust.
  • Conservare in un luogo fresco e asciutto, lontano dalla luce solare diretta e dalle temperature estreme.

8. Risoluzione Dei Problemi

  • Il dispositivo non si accende: Ensure the hand warmer is fully charged. Press and hold the power button for 3 seconds.
  • Calore insufficiente: Check the heat setting and adjust to a higher level if needed. Ensure the device is not covered, which could impede heat dissipation.
  • Problemi di ricarica: Verify that the USB-C cable is securely connected to both the hand warmer and the power source. Try a different USB-C cable or power adapter.

9. Specifiche

ModelloUT3 Lite
Dimensioni (ciascuna)8.6 x 4.8 x 1.55 cm (3.39 x 1.89 x 0.61 pollici)
Peso (ciascuno)65g
MaterialePolyester, Silicone, Plastic
Tipo di batteriaLithium-Ion/Lithium-Polymer
Temperatura massima126°F (53°C)
Impostazioni di calore3 livelli
Max Heat DurationFino a 8 ore (a bassa potenza)
Porta di ricaricaUSB-C
CertificazioniCertificato UL

10. Garanzia e supporto

OCOOPA products come with a manufacturer's warranty. For specific warranty details, maintenance information, or technical support, please refer to the warranty card included in your package or visit the official OCOOPA website. You can also contact OCOOPA customer service for assistance.

11. Immagini aggiuntive del prodotto

Two OCOOPA UT3 Lite hand warmers with a floral design.

Image: A pair of OCOOPA UT3 Lite hand warmers featuring a 'Nocturne Garden' floral pattern.

A hand placing a slim OCOOPA UT3 Lite hand warmer into a coat pocket.

Image: Demonstrating the ultra-slim and pocket-sized design of the UT3 Lite hand warmer.

An OCOOPA UT3 Lite hand warmer with an '8h' graphic, indicating long-lasting warmth.

Image: Highlighting the extended battery life, providing up to 8 hours of warmth.

The OCOOPA UT3 Lite hand warmer packaging, showing the product and included accessories.

Image: The complete package contents, including hand warmers, charging cable, lanyards, and pouch.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.