1. Introduzione
This manual provides essential information for the safe and efficient use of your Redodo 12V 300Ah LiFePO4 Battery. Please read it thoroughly before installation and operation.
The Redodo 12V 300Ah LiFePO4 battery offers a high usable capacity, capable of powering common appliances for extended periods. It features automotive-grade cells, ensuring stable performance and greater power output. Weighing approximately one-third of a comparable lead-acid battery, it is designed for portability and ease of installation. This battery provides a significantly longer cycle life, ranging from 4,000 to 15,000 cycles, and an estimated 10-year lifespan, far exceeding traditional lead-acid batteries.
It is ideal for off-grid solar systems and various outdoor applications such as RVs, camping, and marine use. The battery can be connected in series and parallel configurations to achieve higher voltage (up to 48V) and larger capacity (up to 1200Ah).

2. Informazioni sulla sicurezza
Your Redodo LiFePO4 battery incorporates a built-in 200A Battery Management System (BMS) for comprehensive protection. This BMS safeguards against:
- Sovraccarico
- Over-scarico
- Sovracorrente
- Cortocircuito
- Sovratemperatura
The battery utilizes automotive-grade LiFePO4 cells, which are inherently stable and safe. It is 100% safe, non-toxic, and uses renewable energy technology. However, always observe the following general safety precautions:
- Non smontare, forare o danneggiare la batteria.
- Evitare di esporre la batteria a temperature estreme, alla luce solare diretta o al fuoco.
- Utilizzare solo caricabatterie e metodi di ricarica compatibili.
- Assicurare una ventilazione adeguata durante la carica e la scarica.
- Keep terminals free from foreign objects and ensure connections are secure.
- This battery is not suitable for use as a starter battery or in golf carts. It is designed for energy storage applications.

3. Configurazione e installazione
3.1 Cosa c'è nella scatola
Dopo aver disimballato, verificare che tutti i componenti siano presenti:
- 1 batterie da 12.8 V 300 Ah
- 1 x Manuale del prodotto (questo documento)
- 2 x Insulation Caps
- 2 x M8 Terminal Bolts
- 2 rondelle piatte
- 1 x Guida rapida

3.2 Terminal Specifications and Connections
The battery features M8 terminals. Ensure all connections are tight and secure to prevent arcing and ensure optimal performance.

3.3 Collegamenti in serie e in parallelo
The Redodo 12V 300Ah LiFePO4 battery supports both series and parallel connections for increased voltage e capacità:
- Connessione parallela: Collegare le batterie in parallelo per aumentare la capacità totale mantenendo lo stesso volumetage (e.g., two 12V 300Ah batteries in parallel yield 12V 600Ah). Maximum recommended parallel connection is 4 batteries (12V 1200Ah).
- Collegamento in serie: Collegare le batterie in serie per aumentare la tensione totaletage while maintaining the same capacity (e.g., two 12V 300Ah batteries in series yield 24V 300Ah). Maximum recommended series connection is 4 batteries (48V).
- Collegamento in serie-parallelo: Combine series and parallel connections for higher voltage and capacity (e.g., 4P4S configuration can achieve 48V 1200Ah, totaling 61.44 kWh).
Always ensure all batteries in a series or parallel bank are of the same type, capacity, and state of charge before connecting. Consult a qualified professional for complex system designs.

4. Istruzioni per l'uso
4.1 metodi di ricarica
The Redodo 12V 300Ah LiFePO4 battery can be charged using several methods. Always use chargers specifically designed for LiFePO4 batteries with appropriate voltage e le valutazioni correnti.
- LiFePO4 Battery Charger: A 12V (14.6V) 60A LiFePO4 charger can fully charge the battery in approximately 5 hours.
- Solar Panel with MPPT Controller: A solar panel system with a capacity of 1200W or more, coupled with an MPPT controller (e.g., 40A MPPT), can charge the battery over the course of one day, depending on sunlight conditions.
- Generator (AC-DC Charger): A 60A AC-DC charger connected to a generator can charge the battery in approximately 5 hours.
- Alternator (DC-DC Charger): A 40A DC-DC charger connected to a vehicle's alternator can charge the battery in approximately 7.5 hours.

4.2 Power Output and Appliance Usage
The 12V 300Ah battery provides 3840Wh of usable energy and a maximum continuous power output of 2560W. This capacity allows for extended operation of various appliances:
- Forno a microonde (700W): Circa 5.48 ore di utilizzo.
- Air Fryer (1700W): Circa 2.25 ore di utilizzo.
- Frigorifero (50W): Circa 76.8 ore di utilizzo.
- Coffee Machine (800W): Circa 4.8 ore di utilizzo.

5. Manutenzione
LiFePO4 batteries are known for their low maintenance requirements compared to lead-acid batteries. To ensure the longevity and optimal performance of your Redodo battery:
- Ispezione regolare: Controllare periodicamente i terminali della batteria per verificare la presenza di corrosione o collegamenti allentati. Pulire se necessario.
- Magazzinaggio: If storing the battery for an extended period, ensure it is charged to approximately 50-70% State of Charge (SOC) and stored in a cool, dry place. Avoid storing in direct sunlight or extreme temperatures.
- Ricarica: While the BMS protects against over-discharge, it is generally recommended to avoid consistently discharging the battery below 20% SOC to maximize its lifespan.
- Pulizia: Mantenere la batteria casing pulito e privo di polvere e detriti. Utilizzare un panno asciutto per la pulizia.
6. Risoluzione Dei Problemi
If you encounter issues with your Redodo LiFePO4 battery, consider the following common troubleshooting steps:
- Batteria non in carica:
- Verificare che il caricabatterie sia collegato correttamente e funzioni.
- Ensure the charger is compatible with LiFePO4 batteries and has the correct voltage uscita.
- Controllare che i collegamenti dei terminali non siano allentati o corrosi.
- Confirm the battery's internal BMS has not activated a protection mode (e.g., due to extreme temperature or over-discharge). Allow the battery to rest or warm up/cool down if necessary.
- Bassa potenza in uscita:
- Check the battery's State of Charge (SOC). A low SOC will result in reduced power.
- Ensure all connections are secure and cables are of adequate gauge for the current draw.
- Verify that the load does not exceed the battery's maximum continuous discharge current (200A) or maximum load power (2560W).
- Odore o calore insolito:
- Scollegare immediatamente la batteria da tutti i carichi e caricabatterie.
- Contact Redodo customer support for assistance.
For persistent issues or concerns, please refer to the support section for contact information.
7. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Modello | 12V 300AH |
| Volume Nominaletage | 12.8V |
| Capacità nominale | 300 Ah |
| Energia utilizzabile | 3840 Wh |
| Massimo. Corrente di scarica continua | 200 Amps |
| Massimo Carica potenza | 2560W |
| Ciclo di vita | 4000-15000 cycles (depending on Depth of Discharge) |
| Durata stimata | 10 anni |
| Dimensioni (L x P x A) | 20.55 x 9.45 x 8.58 pollici |
| Peso dell'articolo | 59.9 libbre |
| Tipo di terminale | M8 |
| Resistenza interna | 40 milliohm |
| BMS | Built-in 200A BMS with multi-protection |
8. Garanzia e supporto
8.1 Informazioni sulla garanzia
Redodo provides a Garanzia di 5 anni on this LiFePO4 battery, reflecting confidence in its quality and durability. The battery is designed for a Durata della vita di 10 anni, offering long-term reliable power.
8.2 Assistenza clienti
For any questions, technical assistance, or warranty claims, please contact Redodo customer support. We aim for a risposta 24 ore su 24 to all inquiries.
For more information or to consult with Redodo freely, please visit our official websito o contattaci tramite la piattaforma su cui hai acquistato il prodotto.