Mount-It! MI-1765 Single Monitor Wall/Pole Mount Instruction Manual

Introduzione

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Mount-It! MI-1765 Single Monitor Wall/Pole Mount. Please read this manual thoroughly before installation and retain it for future reference. This mount is designed to support single monitors between 17 and 32 inches, with a maximum weight of 15.4 lbs, and is compatible with VESA 75x75 and 100x100 mounting patterns.

Informazioni sulla sicurezza

AVVERTIMENTO: La mancata lettura e osservanza di queste istruzioni può causare gravi lesioni personali, danni materiali o l'annullamento della garanzia. Se non si comprendono queste istruzioni o si hanno dubbi sulla sicurezza dell'installazione, contattare l'assistenza clienti.

• Non superare la capacità di peso massima di 15.4 libbre (7 kg).
• Ensure the mounting surface (wall or pole) can safely support the combined weight of the mount and the monitor.
• Use only the hardware provided. If any parts are missing or defective, contact Mount-It! customer support.
• Do not install into drywall alone. For wood stud mounting, ensure the mount is secured into the center of a solid wood stud. For concrete/brick mounting, use appropriate anchors.
• Always use a second person for assistance during installation, especially when lifting the monitor.
• Tenere lontani bambini e animali domestici durante l'installazione.
• Check all connections regularly to ensure they remain secure.

Contenuto della confezione

Prima di procedere con l'installazione, verificare che tutti i componenti siano presenti e integri.

• Gruppo braccio a molla
• Base per montaggio a parete
• Pole Mounting Clamp (with alternative bolts for thicker poles)
• Piastra VESA
• Mounting Hardware (Lag Screws, Washers, Concrete Anchors, Bolts for Monitor)
• Chiavi esagonali
• Coperture decorative
• Bubble Level (may be integrated into tools)

Configurazione e installazione

1. Choose Mounting Option: Wall or Pole

The MI-1765 offers versatile mounting options for either a wall or an existing pole. Select the method that best suits your workspace.

Figure 1: Wall and Pole Mounting Options. The image displays two mounting methods: an adjustable pole mount base (fits poles 1.1" - 2.36" diameter) with +/-135° rotation, and a fixed wall mount base with +/-90° and +/-180° rotation options.

2. Installazione a parete

2.1 Wood Stud Mounting

1. Using a stud finder, locate the center of a wood stud at your desired mounting height.
2. Hold the wall mount plate against the stud, ensuring it is centered. Use a bubble level to confirm straightness.
3. Mark the center of the mounting holes with a pencil.
4. Using a 3/16" (4.5mm) drill bit, drill pilot holes at the marked locations.
5. Secure the wall mount plate to the wall using the provided lag screws and washers. Tighten until secure.
6. Insert the decorative covers into each of the bolt holes.

2.2 Concrete / Brick Mounting

1. Hold the wall mount plate at the desired location on the concrete or brick wall. Use a bubble level to ensure straightness.
2. Mark the center of the mounting holes with a pencil.
3. Using a 3/8" (10mm) drill bit, drill holes at the marked locations to a depth of 2.4" (60mm).
4. Clear any dust and debris from the drilled holes.
5. Insert the provided concrete anchors into the holes.
6. Secure the wall mount plate to the wall using the provided lag screws and washers. Tighten until secure.
7. Insert the decorative covers into each of the bolt holes.

3. Pole Mounting Installation

This option is for mounting the arm to an existing pole with a diameter between 1.1" and 2.4".

1. Using the provided hex wrench, loosen the two bolts on the pole clamp fino al clamp opens wide enough to slide onto your pole.
2. For thicker poles (1.8" - 2.4" diameter), remove the pre-installed bolts and replace them with the alternative longer bolts provided. Adjust the width of the clamp essere leggermente più grande del polo.
3. Slide the pole clamp onto the pole at the desired height.
4. Tighten the bolts on the pole clamp fino al sicuro.

4. Attaching the Spring Arm to the Mount

1. ATTENZIONE: The spring arm is under tension. It is recommended to have a second person assist with this step. Carefully cut the zip tie securing the spring arm.
2. Place the end of the spring arm onto the end of the wall mount or pole mount.
3. Tighten the bolt on the back of the spring arm to secure it to the base.

5. Fissaggio del monitor

1. Using the appropriate size bolts and washers for your monitor's VESA pattern (75x75mm or 100x100mm), install the top two bolts into the monitor's VESA holes. Leave a gap of approximately 0.1 inches (2.5mm) between the bolt head and the monitor surface.
2. Carefully hang the monitor onto the top of the VESA plate on the spring arm, aligning the top two bolts with the slots.
3. Install the lower two bolts and washers through the lower holes of the VESA plate into the monitor.
4. Tighten all four bolts until secure, ensuring not to overtighten.

Figure 2: Quick Installation Base. This image illustrates the quick and convenient assembly mechanism for attaching the monitor arm to its base.

Operating & Adjustments

The MI-1765 monitor arm features full motion adjustments for optimal viewcomfort e flessibilità.

Figure 3: Full Motion Design. This diagram highlights the arm's extension range (3.5" - 21.8"), swivel capabilities (+/-180° and +/-90°), rotation (+/-180°), and maximum height adjustment (12.2").

• Regolazione dell'altezza: The spring arm allows for effortless height adjustments. Gently push or pull the monitor to the desired vertical position.
• Regolazione dell'inclinazione: To adjust the monitor's tilt angle, loosen the screw behind the VESA assembly. Position the monitor at the desired angle, then tighten the screw to secure it. The tilt range is up to 90 degrees.
• Regolazione della rotazione: The arm allows for 180° swivel, enabling you to share your screen easily or adjust your viewing angle. The VESA plate also offers +/-90° swivel.
• Rotazione: Rotate your monitor 360° to switch between landscape and portrait orientation.
• Estensione: The arm extends up to 21.8" (55.4 cm), allowing you to bring your screen closer or push it further away for optimal viewdistanza.

Gestione dei cavi

Keep your workspace neat and organized by routing cables through the integrated cable management clips.

1. Open the cable management clips located on the underside of the spring arm.
2. Route your monitor's power and video cables through the clips.
3. Close the clips to secure the cables.

Figure 4: Cable Management. This image demonstrates how to use the integrated cable management clips to keep cables tidy and out of sight.

Manutenzione

Una manutenzione regolare garantisce la longevità e il funzionamento sicuro del supporto per monitor.

• Controllare periodicamente tutte le viti e i bulloni per assicurarsi che siano ben serrati e sicuri.
• Pulisci il supporto con un panno morbido eamp panno. Evitare detergenti abrasivi o solventi.
• Do not lubricate any moving parts unless specifically instructed by Mount-It! support.

Risoluzione dei problemi

In caso di problemi, fare riferimento ai seguenti problemi comuni e alle relative soluzioni:

Specifiche

Garanzia e supporto

This Mount-It! monitor arm comes with a Garanzia a vitaIl nostro competente e reattivo team di assistenza clienti con sede negli Stati Uniti è disponibile per rispondere a qualsiasi domanda durante il normale orario lavorativo.

For assistance, please visit the Mount-It! websito o contatta direttamente il nostro servizio clienti.

Prodotto finitoview Video