1. Prodotto finitoview
The PWAYTEK HDMI Over Ethernet Extender allows for the transmission of HDMI signals over long distances using a single Cat5e/6/7 Ethernet cable. It supports 1080P@60Hz resolution, Full HD 3D, and includes features such as local loop out, EDID management, IR control, and Power Over Cable (POC) functionality for simplified installation.
Caratteristiche principali:
- Trasmissione estesa: Achieves 60m/196ft with Cat6/7 and 40m/130ft with Cat5e for superior audio and video quality.
- Immagini ad alta definizione: Supports 1080P@60Hz and Full HD 3D for an immersive viewesperienza di acquisizione.
- Controllo IR: Enables remote control of the signal source (20-60KHz).
- Uscita loop locale: Transmitter includes an HDMI output port for local monitoring.
- Unilateral Power Supply (POC): Powers both transmitter and receiver via a single Ethernet cable, eliminating the need for a power adapter at the receiver end.
- Costruzione durevole: Full metal housing for enhanced durability.
2. Contenuto della confezione
Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto.
Image: Contents of the PWAYTEK HDMI Extender package.
- 1x HDMI Extender Transmitter
- 1x HDMI Extender Receiver
- 1x Power Adapter (for Transmitter)
- 2 cavi IR (1 IR Blaster, 1 ricevitore IR)
- 1x Manuale utente
3. Istruzioni per l'installazione
Follow these steps to set up your PWAYTEK HDMI Extender.
3.1 Collegamento del trasmettitore (TX)
Immagine: frontale e laterale view of the Transmitter unit.
- Connect your HDMI source device (e.g., PC, DVD player, set-top box) to the HDMI IN port on the Transmitter unit using an HDMI cable.
- If local monitoring is desired, connect a local display (e.g., TV, monitor) to the Uscita HDMI (Loop Out) port on the Transmitter unit using an HDMI cable.
- Connect one end of a Cat5e/6/7 Ethernet cable to the UTP porta sull'unità trasmettitore.
- If using IR control, connect the IR Blaster cable to the Uscita IR port on the Transmitter and position the IR emitter near the IR sensor of your source device.
3.2 Collegamento del ricevitore (RX)
Image: Typical connection diagram for the HDMI Extender.
- Connect the other end of the Cat5e/6/7 Ethernet cable from the Transmitter to the UTP porta sull'unità ricevente.
- Connect your remote display (e.g., TV, projector) to the Uscita HDMI port on the Receiver unit using an HDMI cable.
- If using IR control, connect the IR Receiver cable to the INFRAROSSO port on the Receiver and position the IR receiver to face your remote control.
3.3 Alimentazione del dispositivo
- Collegare l'adattatore di alimentazione fornito al CC 5V porta sull'unità trasmettitore.
- Plug the power adapter into a wall outlet. Due to POC (Power Over Cable) functionality, the Receiver unit will be powered automatically through the Ethernet cable from the Transmitter.
- Verificare che il PWR E STA (Status) indicator lights on both the Transmitter and Receiver units are illuminated, indicating a successful connection and power supply.
4. Istruzioni per l'uso
4.1 Distance Selection Switch
The Receiver unit features a switch to optimize performance based on the Ethernet cable length:
- Impostare l'interruttore su '30m' for cable lengths up to 30 meters (approximately 98 feet).
- Impostare l'interruttore su '50m' for cable lengths between 30 meters and 60 meters (approximately 196 feet).
Ensure the switch setting matches your cable length for optimal signal quality.
4.2 Local Loop Out Function
Image: Illustration of the local loop out functionality.
The HDMI OUT port on the Transmitter allows you to connect a local display. This is useful for monitoring the source content without needing to go to the remote display location.
4.3 Controllo IR
Image: Setup for IR remote control.
The IR control feature allows you to use your source device's remote control from the remote display location. Point your remote at the IR Receiver connected to the Receiver unit. The signal will be transmitted via the Ethernet cable to the IR Blaster connected to the Transmitter unit, which then controls your source device.
5. Manutenzione
- Conservare il dispositivo in un luogo fresco e asciutto, lontano dalla luce solare diretta e da fonti di calore.
- Pulire il dispositivo con un panno morbido e asciutto. Non utilizzare detergenti liquidi o spray.
- Assicurare una ventilazione adeguata attorno alle unità per evitare il surriscaldamento.
- Avoid bending or crimping the HDMI and Ethernet cables excessively.
6. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| No picture on the remote display. | Loose cable connections, incorrect power, incompatible resolution, incorrect distance switch setting. | Check all HDMI and Ethernet cable connections. Ensure the power adapter is connected to the Transmitter and plugged in. Verify the PWR and STA lights are on. Adjust the distance switch on the Receiver to match your cable length. Ensure your source and display support 1080P@60Hz. Try a different HDMI cable. |
| Flickering or intermittent signal. | Poor quality Ethernet cable, excessive cable length, interference, incorrect distance switch setting. | Use a high-quality Cat6 or Cat7 Ethernet cable. Ensure the cable length is within the specified limits (60m for Cat6/7, 40m for Cat5e). Adjust the distance switch on the Receiver. Avoid running the Ethernet cable near strong electrical interference sources. |
| Il controllo IR non funziona. | IR cables incorrectly connected, IR emitter/receiver not properly positioned. | Ensure the IR Blaster is connected to the Transmitter's IR OUT and the IR Receiver to the Receiver's IR IN. Position the IR Blaster directly over the source device's IR sensor. Ensure the IR Receiver is facing your remote control. |
| No local loop out display. | HDMI cable issue, local display input selection. | Check the HDMI cable connecting the Transmitter's HDMI OUT to the local display. Ensure the local display is set to the correct HDMI input. |
7. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | PWAYTEK |
| Modello | B0CDQ48VVJ |
| Tipo di connettore | Cavo HDMI |
| Distanza di trasmissione | Up to 60m (196ft) with Cat6/7; 40m (130ft) with Cat5e |
| Risoluzione supportata | 1080P@60Hz, Full HD 3D |
| IR Control Frequency | Da 20 a 60 kHz |
| Alimentazione elettrica | Unilateral Power Supply (POC) via Transmitter |
| Materiale dell'alloggiamento | Metallo |
| Peso dell'articolo | 13.4 once |
| Dimensioni del pacco | 5.55 x 4.33 x 2.52 pollici |
8. Garanzia e supporto
PWAYTEK products are designed for reliability and performance. For any technical assistance or warranty inquiries, please refer to the contact information provided in your product packaging or visit the official PWAYTEK websito. Conservare la ricevuta d'acquisto per la convalida della garanzia.