Manuale utente del DinoFire Rechargeable Presentation Clicker X17

Introduzione

Thank you for choosing the DinoFire Rechargeable Presentation Clicker, Model X17. This device is designed to enhance your presentations with its wireless control, integrated laser pointer, and user-friendly features. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance.

Contenuto della confezione

Si prega di verificare che tutti gli articoli siano presenti nel pacco:

• DinoFire Rechargeable Presentation Clicker (X17)
• USB Receiver (stored inside the clicker)
• Cavo di ricarica micro USB
• Manuale dell'utente (questo documento)

Prodotto finitoview

The DinoFire X17 Presentation Clicker features an ergonomic design with intuitive controls for seamless presentation delivery. Familiarize yourself with the device's components and button functions.

Figura 1: Dettagliato view of the DinoFire X17 Presentation Clicker showing button functions and port locations.

Funzioni dei pulsanti:

• Pagina su (▲): Advances to the previous slide.
• Pagina giù (▼): Passa alla diapositiva successiva.
• Pulsante puntatore: Attiva il puntatore laser rosso.
• Play/Full Screen (Press and Hold): Initiates or exits full-screen presentation mode.
• Black Screen (Press and Hold): Toggles a black screen during presentation.
• Accendere/spegnere: Interruttore di alimentazione per il dispositivo.
• Select Hyperlink (Single Press): Selects a hyperlink on the slide.
• Open the Hyperlink (Double Press): Opens the selected hyperlink.
• Switch Windows (Long Press): Cycles through open application windows.
• Close Window (Long Press): Closes the active window.
• Porta di ricarica: Porta micro USB per ricaricare il dispositivo.
• Foro di luce: Location of the laser emitter.

Guida all'installazione

1. Charging the Presenter

Before initial use, fully charge the presentation clicker. A full charge typically takes approximately one hour and provides power for over one week of use.

• Connect the provided Micro USB charging cable to the charging port on the side of the presenter.
• Collegare l'altra estremità del cavo a una fonte di alimentazione USB (ad esempio, una porta USB del computer, un adattatore USB da parete).
• The charging indicator light will illuminate (refer to "Low Power Indicator" section for details).
• Una volta caricata completamente, scollegare il cavo.

Figura 2: The presentation clicker being charged via its Micro USB port, connected to a laptop.

2. Collegamento del ricevitore USB

The USB receiver is stored magnetically within the presentation clicker for convenience and to prevent loss.

• Gently pull out the USB receiver from the bottom end of the presentation clicker.
• Inserire il ricevitore USB in una porta USB disponibile sul computer (laptop o desktop).
• Il sistema rileverà e installerà automaticamente i driver necessari. Non è richiesta alcuna installazione manuale.

Figura 3: The magnetic storage for the USB receiver, demonstrating its removal and insertion into a computer's USB port.

3. Accensione/Spegnimento

• Locate the "Switch on/off" button on the side of the clicker.
• Per accendere il dispositivo, spostare l'interruttore in posizione "ON".
• Per preservare la durata della batteria, quando non in uso, far scorrere l'interruttore in posizione "OFF".

4. Compatibilità di sistema e software

The DinoFire X17 is widely compatible with various operating systems and presentation software.

• Sistemi supportati: Windows 2003, XP, Windows Vista, Windows 7, 8, 10, Linux, Android, Mac OS.
• Software supportato: Keynote, Prezi, MS Word, Excel, PowerPoint, ACD See, website browsers, iWork, Google Slides, etc.

Figura 4: Visual representation of the broad compatibility of the presentation clicker with different operating systems and presentation applications.

Istruzioni per l'uso

Basic Presentation Control

• Diapositiva successiva: Press the "Page Down" (▼) button.
• Diapositiva precedente: Press the "Page Up" (▲) button.
• Start/Exit Full Screen: Press and hold the "Page Up" (▲) button.
• Schermo nero: Press and hold the "Page Down" (▼) button to toggle a black screen.

Utilizzo del puntatore laser

The integrated red laser pointer allows you to highlight specific content on your screen or projection.

• Press and hold the "Pointer Button" (red dot icon) to activate the laser.
• Rilasciare il pulsante per spegnere il laser.
• The laser has a range of up to 300 feet (91 meters).
• Attenzione: Do not point the laser directly at people's eyes or at highly reflective surfaces.

Figura 5: The red laser pointer in operation, highlighting its visibility and including a safety warning.

Funzioni avanzate

• Seleziona collegamento ipertestuale: Single press the "ENTER" button.
• Open Hyperlink: Double press the "ENTER" button.
• Cambia finestra: Long press the "TAB" button to cycle through open applications.
• Close Window: Long press the "ENTER" button to close the active window.

Gamma di controllo wireless

The DinoFire X17 offers a wireless control range of up to 100 feet (30 meters), allowing you freedom of movement during your presentation.

Figura 6: Illustration of the presentation clicker's effective long control range in a presentation setting.

Manutenzione

Linee guida per la ricarica

• Charge the device when the low power indicator flashes continuously.
• Avoid overcharging by disconnecting the cable once fully charged.
• Use the provided Micro USB cable or a certified equivalent for charging.

Ricevitore USB di archiviazione

Always store the USB receiver inside the magnetic compartment of the clicker when not in use to prevent loss and damage.

Pulizia

Pulire il dispositivo con un panno morbido e asciutto. Non utilizzare detergenti liquidi o materiali abrasivi.

Risoluzione dei problemi

Indicatore di bassa potenza

The device features a low power indicator to alert you when charging is needed. When the indicator flashes continuously, please charge the device. The device will enter auto-sleep mode after approximately 5 minutes of inactivity to save energy.

Figura 7: Explanation of the indicator light states for working, charging, and fully charged conditions.

Specifiche

• Modello: X17
• Marca: DinoFuoco
• Tecnologia wireless: 2.4GHz RF
• Intervallo di controllo: Fino a 100 piedi (30 metri)
• Tipo di laser: Laser rosso
• Portata laser: Fino a 300 piedi (91 metri)
• Tipo di batteria: 1 batteria ai polimeri di litio (inclusa)
• Tempo di ricarica: Circa 1 ora
• Tempo di utilizzo: Over one week (on a single charge)
• Dimensioni: 6.42 x 1.61 x 1.14 pollici (16.3 x 4.1 x 2.9 cm)
• Peso dell'articolo: 1.6 once (45 grammi)
• Sistemi compatibili: Windows 2003/XP/Vista/7/8/10, Linux, Android, Mac OS
• Software compatibile: Keynote, Prezi, MS Word, Excel, PowerPoint, ACD See, web browsers, iWork, Google Slides

Garanzia e supporto

Informazioni sulla garanzia

The DinoFire Rechargeable Presentation Clicker X17 typically comes with a 3-year warranty. Please refer to your purchase documentation or the manufacturer's official websito per termini e condizioni di garanzia specifici.

Assistenza clienti

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact DinoFire customer support through their official website or the retailer where the product was purchased. Keep your purchase receipt or order number handy for faster service.