ESKY 150 EC Micro RC Helicopter Instruction Manual

Introduzione

This manual provides essential instructions for the safe and effective operation of your ESKY 150 EC Micro RC Helicopter. The 150 EC is a third-generation micro remote-controlled helicopter designed for ease of operation. It features a 6-axis gyroscope for stable flight, atmospheric pressure and altitude hold capabilities, hovering, and a controllable flight path. It also includes a one-button shutdown function for emergency situations.

Cosa c'è nella scatola

Carefully unpack all components and ensure all items listed below are present. If any items are missing or damaged, please contact customer support.

• 1 elicottero ESKY 150 EC
• 1 x MINI 6X 6-Channel 2.4GHz Transmitter (Remote Control)
• 1 x 1S 3.7V 150mAh 20C Li-Po Battery (for helicopter)
• 2 x lame principali (di ricambio)
• 1 x Tail Blade (spare)
• 1 x Caricabatterie USB
• 2 cacciaviti
• 1 x Manuale utente (questo documento)

Image: All components included in the ESKY 150 EC package.

Prodotto finitoview

Componenti per elicotteri

Immagine: Lato view of the ESKY 150 EC helicopter.

The ESKY 150 EC helicopter features a durable frame, main rotor blades, a tail rotor, landing skids, and a removable canopy. The main rotor provides lift and control, while the tail rotor controls yaw (left/right rotation).

Telecomando (trasmettitore)

The MINI 6X 6-Channel 2.4GHz transmitter is used to control the helicopter. Familiarize yourself with its various controls:

Image: Labeled diagram of the MINI 6X Remote Control.

• Interruttore di modalità: Changes flight modes (e.g., beginner/advanced).
• Indicatore LED di alimentazione: Mostra lo stato dell'alimentazione.
• Interruttore di taglio dell'acceleratore: Immediately cuts power to the motor.
• Rudder (Left/Right): Controls the helicopter's yaw.
• Acceleratore (su/giù): Controlla la velocità e l'altitudine del rotore principale.
• Aileron (Left/Right): Controls the helicopter's roll (side-to-side movement).
• Elevator (Up/Down): Controls the helicopter's pitch (forward/backward movement).
• Trim Controls (Throttle, Rudder, Aileron, Elevator): Fine-tune controls to correct unwanted drift.
• Interruttore di alimentazione: Turns the remote control ON/OFF (hold down for ON/OFF).

Impostare

1. Ricarica della batteria dell'elicottero

The helicopter uses a 1S 3.7V 150mAh Li-Po battery. Always use the provided USB charger.

1. Connect the USB charger to a USB power source (e.g., computer USB port, USB wall adapter).
2. Connect the helicopter battery to the USB charger. Ensure the polarity is correct.
3. The indicator light on the charger will show the charging status (refer to charger instructions for specific light patterns).
4. Once charging is complete, disconnect the battery from the charger. Do not overcharge.

Image: Connecting the Li-Po battery to the USB charger.

2. Installing the Helicopter Battery

Ensure the helicopter is powered off before installing the battery.

1. Gently remove the helicopter's canopy to access the battery compartment.
2. Insert the charged Li-Po battery into the compartment.
3. Connect the battery plug to the helicopter's power port.
4. Carefully reattach the canopy.

Image: Helicopter with canopy removed, revealing the battery compartment.

Image: Battery inserted into the helicopter.

3. Accensione e associazione

The helicopter and remote control must be bound (paired) before flight.

1. Posizionare l'elicottero su una superficie piana e livellata.
2. Ensure the remote control's throttle stick is in the lowest position.
3. Turn on the helicopter's power switch. The helicopter's indicator light will flash.
4. Press and hold the Power Switch on the remote control until it turns on. The remote control's indicator light will flash.
5. Wait for a few seconds. The indicator lights on both the helicopter and remote control should become solid, indicating a successful binding.
6. Se l'associazione non riesce, spegnere entrambi i dispositivi e ripetere la procedura.

Istruzioni per l'uso

Always operate the helicopter in an open, safe area, away from people, animals, and obstacles. Ensure you have sufficient space for flight.

Controlli di volo di base

• Acceleratore (leva sinistra su/giù): Increases or decreases the main rotor speed, controlling ascent and descent.
• Timone (stick sinistro sinistra/destra): Controls the helicopter's rotation around its vertical axis (yaw).
• Ascensore (levetta destra su/giù): Controlla il movimento in avanti e indietro (beccheggio).
• Alettoni (levetta destra sinistra/destra): Controlla il movimento laterale (rollio).

Decollo e atterraggio

1. Decollare: Slowly push the throttle stick up. The helicopter will gain altitude. Maintain a steady throttle to achieve a stable hover.
2. Landing: Slowly pull the throttle stick down. The helicopter will descend. Reduce throttle completely upon landing.

Altitude Hold and Hover

The 150 EC is equipped with a 6-axis gyroscope and atmospheric pressure sensor for stable flight and altitude hold. Once the helicopter reaches a desired altitude, release the throttle stick to its center position. The helicopter will attempt to maintain its current height.

Flight Modes (Hi/Lo)

The remote control features a Mode Switch. It is recommended to use the "Hi" mode for more stable and responsive flight. The "Lo" mode may exhibit a slight delay in controller response.

Spegnimento con un solo pulsante

In an emergency or if the helicopter is out of control, use the Throttle Cut Switch to immediately stop the motors. This function can also be used for a quick, controlled shutdown after landing.

Manutenzione

Pulizia

Wipe the helicopter and remote control with a soft, dry cloth after each use. Avoid using water or chemical cleaners, as they can damage electronic components.

Sostituzione della lama

If main or tail blades become damaged, replace them with the provided spares using the included screwdriver. Ensure blades are securely fastened but not overtightened.

Immagine: dettagliata views of helicopter components, including rotor attachment points.

Cura della batteria

• Utilizzare sempre il caricabatterie originale.
• Non sovraccaricare o scaricare eccessivamente la batteria.
• Conservare le batterie in un luogo fresco e asciutto, lontano dalla luce solare diretta e dal calore.
• Se la batteria si gonfia o mostra segni di danneggiamento, interromperne immediatamente l'uso e smaltirla correttamente.

Risoluzione dei problemi

Specifiche

• Numero modello: 150 CE
• Produttore: ESCAPE
• Sistema di controllo: Giroscopio ad asse 6
• Caratteristiche: Height Hold, Hover, One-button Shutdown
• Batteria per elicotteri: 1S 3.7V 150mAh Li-Po (included)
• Telecomando: MINI 6X 6-Channel 2.4GHz Transmitter
• Età consigliata: 14 anni e oltre
• Peso dell'articolo: Circa 1.05 libbre (imballaggio incluso)
• Dimensioni della confezione: 8.3 x 7.1 x 3.8 pollici

Image: ESKY 150 EC Helicopter dimensions.

Linee guida di sicurezza

Please read and adhere to these safety guidelines to prevent injury or damage.

• Utilizzare sempre l'elicottero in uno spazio aperto, lontano da persone, animali domestici e ostacoli.
• Non volare vicino a linee elettriche, strade o specchi d'acqua.
• Tenere le dita e gli abiti larghi lontani dalle lame rotanti.
• Never fly in strong winds or adverse weather conditions.
• Per gli utenti di età inferiore ai 14 anni si raccomanda la supervisione di un adulto.
• Do not attempt to modify the helicopter or its components.
• Turn off the helicopter and remote control when not in use.

Garanzia e supporto

Information regarding product warranty and customer support contact details is not available in the provided product data. Please refer to the product packaging or the seller's websito per termini di garanzia specifici e opzioni di supporto.

Video ufficiali dei prodotti

Nei dati del prodotto non sono stati forniti video ufficiali del venditore.