Informazioni importanti sulla sicurezza
Please read and understand all instructions and safety warnings before assembling, operating, or servicing this fire table. Failure to follow these instructions could result in property damage, bodily injury, or death.
- Solo per uso esterno: This fire table is designed for outdoor use only. Do not use indoors or in an enclosed area.
- Liquidazione: Maintain a minimum clearance of 36 inches (91 cm) from the top and sides to any combustible materials.
- Solo gas propano: Use only liquid propane (LP) gas. Do not use natural gas or any other fuel.
- Serbatoio di propano: Use a standard 20 lb (9 kg) propane cylinder (not included). Ensure the tank is securely placed and connected.
- Ventilazione: Ensure adequate ventilation around the fire table.
- Bambini e animali domestici: Keep children and pets away from the fire table at all times, especially during operation.
- Non lasciare mai incustodito: Do not leave the fire table unattended while in operation.
- Perdite di gas: If you smell gas, immediately turn off the gas supply at the tank, extinguish any open flames, and evacuate the area. Do not attempt to light the fire table until the leak is found and corrected.
- Superfici calde: The fire table surfaces will be hot during and after use. Allow to cool completely before touching or moving.
Istruzioni di installazione
Follow these steps to properly set up your HOOOWOOO fire table.
1. Disimballaggio e ispezione
Carefully remove all components from the packaging. Inspect all parts for any damage. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
2. Assemblaggio
Place the fire table in your desired outdoor location, ensuring it is on a level, non-combustible surface and meets all clearance requirements. The main body of the fire table comes pre-assembled. You will need to place the burner unit and lava rocks.
Image: The HOOOWOOO fire table shown with the flame active and with the lid covering the burner, converting it into a regular table.
3. Lava Rock Placement
Carefully distribute the provided lava rocks evenly over the burner pan. Do not cover the igniter electrode or the burner holes. Ensure the lava rocks are dry before first use to prevent popping.
4. Collegamento del serbatoio del propano
- Ensure the propane tank valve is in the OFF position.
- Connect the regulator hose from the fire table to the propane tank valve. Hand-tighten firmly. Do not use tools.
- Check all connections for leaks using a soapy water solution. Apply soapy water to the connections; if bubbles appear, there is a leak. Tighten connections or replace parts as necessary.
- Place the propane tank securely inside the designated compartment within the fire table.
Immagine: Un dettaglio view of the fire table's components, including the ceramic tile tabletop, lava rocks, control panel, and the included dust cover. A standard 20lb propane tank is also depicted, indicating it is not included.
Istruzioni per l'uso
Follow these steps to safely ignite and operate your fire table.
1. Prima dell'illuminazione
- Ensure the area around the fire table is clear of combustible materials.
- Verify all gas connections are secure and there are no leaks.
- Aprire lentamente la valvola del serbatoio di propano.
2. Procedura di accensione
- Locate the control panel on the side of the fire table.
- Push and turn the control knob counter-clockwise to the "LOW" position.
- Tenendo premuta la manopola di controllo, premere ripetutamente il pulsante di accensione finché il bruciatore non si accende.
- Once ignited, continue to hold the control knob in for 10-15 seconds to allow the thermocouple to heat up. Release the knob.
- If the burner does not light within 15 seconds, turn the control knob to "OFF", wait 5 minutes for gas to dissipate, and repeat the ignition procedure.
3. Regolazione della fiamma
Once the burner is lit, you can adjust the flame height by turning the control knob between the "LOW" and "HIGH" positions.
4. Shut-Down Procedure
- Ruotare la manopola di controllo in senso orario fino alla posizione "OFF".
- Chiudere completamente la valvola della bombola del propano.
- Allow the fire table to cool completely before covering or moving.
Image: A close-up of the fire table's control panel, showing the electronic ignitor button and the control valve for adjusting flame intensity from low to high.
Manutenzione
Regular maintenance ensures the longevity and safe operation of your fire table.
1. Pulizia
- Superfici esterne: Clean the wicker and ceramic tabletop with a soft cloth and mild soapy water. Rinse thoroughly and dry completely. Do not use abrasive cleaners or harsh chemicals.
- Burner and Lava Rocks: Ensure the fire table is completely cool. Remove the lava rocks and gently brush any debris from the burner ports. Clean lava rocks by rinsing with water and allowing them to dry completely before placing them back.
- PE Rattan: The PE rattan material is UV resistant and easy to clean, designed for all-weather outdoor use.
Immagine: Un dettaglio view of the high-quality PE Rattan material, emphasizing its UV resistance, ease of cleaning, and suitability for all weather conditions.
2. Conservazione
- When not in use, especially during inclement weather or off-season, cover the fire table with the provided dust cover to protect it from elements.
- Disconnect the propane tank and store it in a well-ventilated outdoor area, away from direct sunlight and heat sources. Do not store a propane tank indoors.
Risoluzione dei problemi
Fare riferimento a questa sezione per i problemi più comuni e le relative soluzioni.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il bruciatore non si accende | Nessun flusso di gas; l'accenditore non produce scintille; aria nella linea del gas; serbatoio del propano vuoto. | Check propane tank valve is open; Ensure igniter electrode is clean and properly positioned; Purge air from gas line by repeating ignition steps; Check propane tank level. |
| Fiamma bassa o fiamma irregolare | Low gas pressure; Partially closed tank valve; Obstruction in burner ports; Over-filling protection device activated. | Ensure propane tank valve is fully open; Clean burner ports; Reset over-filling device by closing tank valve, disconnecting, waiting 5 minutes, then reconnecting and opening slowly. |
| Odore di gas | Perdita di gas. | Immediately turn off gas at the tank. Perform a leak test with soapy water on all connections. If leak persists, do not use and contact qualified service personnel. |
Specifiche
Key technical details for the HOOOWOOO 42-inch Gray Wicker Propane Fire Table.
- Potenza termica: Massimo 50,000 BTU
- Tipo di carburante: Gas di petrolio liquefatto (propano)
- Materiale: Stainless Steel (burner), PE Rattan (exterior), Ceramic Tile (tabletop)
- Dimensioni del prodotto (P x L x A): 42.13" x 25.98" x 25.2"
- Colore: Vimini grigio
- Sistema di accensione: Accenditore elettronico
- Propane Tank Compatibility: Standard 20 lbs (not included)
Image: A diagram illustrating the precise dimensions of the HOOOWOOO 42-inch fire table: 42.13 inches deep, 25.98 inches wide, and 25.20 inches high.
Garanzia e supporto
For any questions, concerns, or warranty claims regarding your HOOOWOOO fire table, please contact the manufacturer directly.
You can visit the official HOOOWOOO store for more information and support: