1. Introduzione
This manual provides essential information for the safe and effective operation of your SHEHDS 200W COB Par Light. This professional stage lighting fixture features a 200W COB LED, offering both cool white (4500K) and warm white (3500K) illumination. Designed with an IP65 waterproof rating and a fanless, muted operation, it is suitable for various indoor and outdoor applications. Please read this manual thoroughly before installation and use.
2. Istruzioni di sicurezza
- Sicurezza elettrica: Garantire l'alimentazione voltage matches the specified requirements of the fixture. Always connect to a grounded power outlet. Disconnect power before any service or maintenance.
- Installazione: Install the fixture in a well-ventilated area, away from flammable materials. Ensure mounting surfaces and hardware can support the weight of the fixture.
- Temperatura: Do not operate the fixture in environments exceeding 40°C (104°F). Allow adequate space around the fixture for heat dissipation.
- Protezione degli occhi: Evitare l'esposizione diretta degli occhi alla fonte di luce, poiché può causare danni agli occhi.
- Grado di impermeabilità: The fixture is IP65 rated, meaning it is protected against dust and low-pressure water jets. While suitable for outdoor use in rain, avoid submerging the unit.
- Manutenzione: Affidare qualsiasi intervento di manutenzione a personale qualificato. Non tentare di riparare l'unità da soli.
3. Contenuto della confezione
Verificare che tutti gli articoli siano presenti al momento del disimballaggio:
- SHEHDS 200W COB Par Light (1 unit)
- Manuale di istruzioni (1 copia)
- Signal Line (1 unit)
- Cavo di alimentazione (1 unità)
Image: Contents of the SHEHDS 200W COB Par Light package.
4. Prodotto finitoview e Caratteristiche
The SHEHDS 200W COB Par Light is engineered for robust performance and versatility in various lighting scenarios.
- Design impermeabile IP65: Features a durable cast aluminum shell with waterproof signal lines, power cords, and control buttons, ensuring reliable operation in outdoor conditions.
- High-Brightness COB LED: Equipped with a 200W COB (Chip-on-Board) LED, providing uniform and powerful cool white (4500K) or warm white (3500K) illumination. The light is designed to be non-glare and eye-safe.
- Fanless Muted Operation: Operates silently without a cooling fan, making it ideal for environments where noise reduction is critical.
- Ampio angolo di fascio: Offers a beam angle of 65°-70°, with an effective range of up to 10 meters.
- Strobe and Dimmer Functions: Includes a shuttle flash rate of 0-10Hz and a 0-100% mechanical dimmer for dynamic lighting effects.
- Costruzione durevole: Built with a sturdy aluminum alloy shell and a long-lasting COB light source, ensuring an LED lifespan exceeding 60,000 hours.
Immagine: Frontale view of the SHEHDS 200W COB Par Light, illustrating its cool and warm white capabilities and IP65 rating.
Image: Close-up of the light's waterproof design and rear control panel.
5. Configurazione e installazione
The SHEHDS 200W COB Par Light is designed for flexible installation. Always ensure the fixture is securely mounted to prevent accidents.
5.1 Opzioni di montaggio
- Montaggio a pavimento: The integrated dual mounting brackets allow the light to be placed directly on a flat surface. Adjust the angle using the durable knobs on the sides.
- Ceiling/Truss Mount: The flexible dual mounting brackets can also be used to hang the fixture from a ceiling or truss system. Ensure appropriate clamps and safety cables (not included) are used and rated for the fixture's weight (approximately 10.78 lbs / 5.05 kg).
5.2 Collegamento di alimentazione
Connect the provided power cord to the fixture's power input and then to a suitable grounded power outlet. Ensure the power source meets the fixture's electrical requirements.
5.3 Connessione DMX (opzionale)
For DMX control, connect a DMX signal line from your DMX controller to the DMX IN port of the fixture. For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on. The fixture uses waterproof DMX connectors; ensure you use compatible cables or adapters.
Image: Dimensions and weight of the SHEHDS 200W COB Par Light.
6. Istruzioni per l'uso
The SHEHDS 200W COB Par Light can be operated via its onboard control panel or an external DMX controller.
6.1 Pannello di controllo integrato
The back control panel features a digital display and buttons to navigate menus and adjust settings. Press the 'Menu' button to cycle through options, 'Up'/'Down' to change values, and 'Enter' or 'OK' to confirm. Specific modes and settings include:
- Impostazione indirizzo DMX: Set the DMX starting address for external control. Once set and confirmed, the address is preserved even after power cycling.
- Dimmer manuale: Adjust the light intensity from 0-100%.
- Effetto stroboscopico: Activate and adjust the flash rate from 0-10Hz.
- Selezione del colore: Switch between Cool White (4500K) and Warm White (3500K) modes.
Immagine: Examples of warm white and cool white lighting effects.
Image: Direct comparison of warm white and cool white output.
7. Controllo DMX
The SHEHDS 200W COB Par Light is compatible with DMX512 protocol, allowing for professional control over its functions.
7.1 DMX Channel Assignment
Refer to the specific DMX channel chart provided with your fixture for detailed channel assignments. Typically, channels will control:
- Canale 1: Dimmer principale (0-100%)
- Canale 2: Intensità del bianco freddo
- Canale 3: Intensità del bianco caldo
- Canale 4: Strobe Speed (0-10Hz)
Consult the fixture's display for the current DMX address and mode settings. Ensure your DMX controller is configured to match the fixture's address and channel mode.
8. Manutenzione
Regular maintenance ensures optimal performance and extends the lifespan of your SHEHDS 200W COB Par Light.
- Pulizia: Periodically clean the lens and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Ispezione: Regularly check power and signal cables for any signs of damage. Ensure all mounting hardware is secure.
- Magazzinaggio: Quando non in uso, conservare l'apparecchio in un ambiente asciutto e privo di polvere.
9. Risoluzione Dei Problemi
If you encounter issues with your SHEHDS 200W COB Par Light, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende. | Nessuna alimentazione; cavo difettoso; problema interno. | Controllare il collegamento elettrico e la presa di corrente. Provare con un cavo di alimentazione diverso. Se il problema persiste, contattare l'assistenza. |
| Nessun controllo DMX. | Indirizzo DMX errato; cavo DMX difettoso; problema con il controller DMX; modalità DMX errata. | Verify DMX address on fixture and controller. Check DMX cable connections. Ensure DMX mode is active on the fixture. |
| L'emissione luminosa è incoerente o tremolante. | Unstable power supply; DMX signal interference; internal component issue. | Ensure stable power. Check DMX connections for interference. If problem persists, contact support. |
| Fixture becomes excessively hot. | Poor ventilation; prolonged operation in high ambient temperature. | Ensure adequate airflow around the fixture. Reduce ambient temperature if possible. |
10. Specifiche
Technical specifications for the SHEHDS 200W COB Par Light (Model: 200W_IP65).
| Caratteristica | Dettaglio |
|---|---|
| Sorgente luminosa | 1 LED COB da 200 W |
| Temperatura del colore | Cool White (4500K) / Warm White (3500K) |
| Cosatage | 200 Watt |
| Angolo del fascio | 65-70 gradi |
| Oscuratore | 0-100% Mechanical Dimmer |
| Velocità strobo | Frequenza |
| Modalità di controllo | DMX512, Manual Control |
| Canali DMX | Refer to product-specific DMX chart |
| Grado di protezione IP | IP65 (impermeabile) |
| Materiale | Lega di alluminio |
| Dimensioni (L x P x A) | 3"L x 9"W x 11"H (circa 7.6 cm L x 22.9 cm W x 27.9 cm H) |
| Peso | 10.78 libbre (circa 5.05 kg) |
| Fonte di alimentazione | Elettrico con cavo |
| Amprabbia | 2 Amps |
11. Garanzia e supporto
SHEHDS products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided at the point of purchase or visit the official SHEHDS websito. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.