Volume regolabile sopra e sottotage Protettore

Introduzione

The Aoyygg SVP-916 Adjustable Over and Under Voltage Protector is an advanced electrical safety device designed to safeguard your household appliances and electrical circuits from voltage fluctuations and overcurrent conditions. This intelligent relay automatically monitors the circuit's voltage and current, disconnecting the power supply when values exceed or fall below pre-set safe limits, and reconnecting it once conditions normalize. It features a dual LED display for real-time monitoring of voltage and current, also functioning as a voltmeter and ammeter.

Informazioni sulla sicurezza

WARNING: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel. Always disconnect power before working with electrical circuits.

• Assicurarsi che il dispositivo sia installato in un ambiente asciutto, lontano dall'umidità e dalla luce solare diretta.
• Verify that the rated current of the protector matches or exceeds the maximum current draw of the connected load.
• Do not attempt to open or repair the device. Refer to qualified service personnel.
• Assicurare una corretta messa a terra secondo le normative elettriche locali.

Contenuto della confezione

• 1x Aoyygg SVP-916 Over Under Voltage Protection Relay

Caratteristiche del prodotto

• Protezione automatica: Automatically cuts off power during over-voltage, sotto-volumetage, or over-current conditions.
• Recupero automatico: Ripristina automaticamente l'alimentazione una volta che il volumetage and current return to normal ranges.
• Parametri regolabili: User-adjustable over-voltage, sotto-volumetage, e soglie di sovracorrente.
• Doppio display LED: Real-time display of current voltage and current, also functions as a voltmeter and ammeter.
• Costruzione durevole: Made from high-quality ABS and electronic components for long service life.
• Installazione semplice: Designed for convenient installation in electrical panels.

Specifiche

Image: Approximate dimensions of the Aoyygg SVP-916 voltage protector, showing height, width, and depth measurements.

Configurazione e installazione

The SVP-916 is designed for DIN rail mounting. Follow these steps for proper installation:

1. Disconnessione dell'alimentazione: Prima di iniziare qualsiasi lavoro elettrico, assicurarsi che l'alimentazione principale del circuito sia completamente scollegata dall'interruttore automatico o dalla scatola dei fusibili.
2. Montaggio: Mount the SVP-916 protector onto a standard DIN rail within your electrical panel.
3. Cablaggio: Connect the incoming live (L) and neutral (N) wires to the "IN" terminals of the protector. Connect the outgoing live (L) and neutral (N) wires to the "OUT" terminals, leading to your protected load. Refer to the wiring diagram below for correct connections.
4. Connessioni sicure: Assicurarsi che tutti i collegamenti dei cavi siano ben saldi e sicuri per evitare contatti allentati e potenziali pericoli.
5. Verifica: Double-check all wiring against the diagram before restoring power.

Image: Wiring diagram illustrating the connection of the SVP-916 voltage protector between a power switch and an air circuit breaker, showing live (L) and neutral (N) connections.

Istruzioni per l'uso

Once installed and power is restored, the SVP-916 will display the current voltage and current on its dual LED screens. The device is pre-set with default protection values, but these can be adjusted.

Regolazione dei parametri di protezione:

1. Premere il tasto IMPOSTATO button to enter the setting mode. The display will show the current setting for over-voltage (OV).
2. Utilizzare il ▲ (Su) e ▼ (Down) buttons to adjust the desired over-voltage threshold (221V-300V).
3. Premere IMPOSTATO again to cycle through other parameters: under-voltage (UV), and over-current (OC).
4. Adjust each parameter using the ▲ E ▼ buttons to your desired values.
5. Dopo aver impostato tutti i parametri, tenere premuto il tasto IMPOSTATO button for a few seconds until the display returns to normal operation mode, saving your settings.

Understanding the Display Indicators:

• Top LED Display: Mostra il volume correntetage(V).
• Bottom LED Display: Mostra la corrente ampetà (A).
• OV.fast/OV.slow: Indica sovra-vol.tage protection status (fast or slow trip).
• UV.fast/UV.slow: Indica sotto-volumetage protection status (fast or slow trip).
• OC.fast/OC.slow: Indicates over-current protection status (fast or slow trip).
• AGG: Illuminates when in adjustment mode.

Immagine: Frontale view of the Aoyygg SVP-916 voltage protector, highlighting the dual LED display showing voltage and current, along with the SET, Up, and Down adjustment buttons.

Manutenzione

The SVP-916 voltage protector is designed for minimal maintenance. However, periodic checks can ensure its optimal performance and longevity:

• Ispezione visiva: Ispezionare periodicamente il dispositivo per verificare la presenza di eventuali segni di danni fisici, scolorimento o collegamenti allentati.
• Pulizia: If necessary, gently wipe the exterior of the device with a dry, soft cloth. Do not use abrasive cleaners or solvents. Ensure power is disconnected before cleaning.
• Verifica della connessione: Annually, or if you suspect an issue, verify that all terminal connections are still tight and secure.
• Condizioni ambientali: Assicurarsi che l'ambiente operativo rimanga entro gli intervalli di temperatura e umidità specificati.

Risoluzione dei problemi

Garanzia e supporto

Aoyygg products are manufactured to high-quality standards. For warranty information and technical support, please refer to the documentation provided with your purchase or contact Aoyygg customer service through their official websito o il rivenditore da cui hai acquistato il prodotto.

Please have your model number (SVP-916) and purchase date ready when contacting support.