1. Introduzione
The FSP Hydro G PRO 1000W Power Supply is an 80 Plus Gold certified, fully modular unit designed for high-performance computing systems. It complies with ATX 3.1 and PCIe 5.1 standards, featuring a native 12V-2x6 connector for next-generation hardware. Its compact design and advanced features ensure stable power delivery, high efficiency, and quiet operation.
Un top-down view of the FSP Hydro G PRO 1000W Power Supply, highlighting its fan grille and compact design.
An illustration emphasizing the power supply's adherence to ATX 3.1 and PCIe 12V-2x6 standards, crucial for next-generation hardware.
2. Informazioni sulla sicurezza
Please read and understand all safety instructions before installing or operating this power supply. Failure to do so may result in personal injury or damage to your equipment.
- Non fare aprire l'alimentatore. Alto vol.tagsono presenti all'interno, anche quando l'unità è scollegata.
- Non fare non inserire alcun oggetto nella griglia della ventola o nelle aperture di ventilazione.
- Non fare expose the power supply to water, moisture, or extreme temperatures.
- Assicurarsi che l'alimentatore sia installato in un'area ben ventilata.
- Utilizzare solo i cavi modulari forniti con questo alimentatore. L'utilizzo di cavi incompatibili può causare danni.
- Collegare l'alimentatore a una presa elettrica dotata di messa a terra.
- Before installation or maintenance, always disconnect the AC power cord from the wall outlet and the power supply.
3. Contenuto della confezione
Verifica che tutti gli articoli siano presenti nel tuo pacco:
- FSP Hydro G PRO 1000W Power Supply Unit
- Set di cavi modulari (scheda madre, CPU, PCIe, SATA, periferica)
- Cavo di alimentazione CA
- Viti di montaggio
- Manuale d'uso
A comprehensive diagram displaying all modular cables provided with the power supply, detailing their lengths and connector configurations for Motherboard, CPU, PCIe, SATA, and Molex connections.
4. Configurazione e installazione
Follow these steps to install your FSP Hydro G PRO 1000W Power Supply:
- Prepara il tuo sistema: Ensure your computer is powered off and unplugged from the wall outlet. Open your computer case to access the power supply mounting area.
- Rimuovere il vecchio alimentatore (se applicabile): Scollegare tutti i cavi dal vecchio alimentatore e rimuoverlo dal case.
- Montare il nuovo alimentatore: Carefully place the FSP Hydro G PRO 1000W Power Supply into the designated bay in your computer case. Secure it with the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow (typically facing downwards if your case has a bottom vent, or upwards if not).
- Collegare i cavi modulari: Identify the necessary cables for your components. This power supply is fully modular, allowing you to connect only the cables you need. Refer to the connection panel diagram below.
- Scheda madre: Connect the 24-pin ATX cable to the 'MOTHERBOARD' port on the PSU and to your motherboard.
- PROCESSORE: Connect the 4+4-pin or 8-pin CPU power cable(s) to the 'CPU' port(s) on the PSU and to your motherboard.
- PCIe (Graphics Cards): Connect the 6+2-pin PCIe cables or the native 12V-2x6 cable to the 'PCIe' port(s) on the PSU and to your graphics card(s). The 12V-2x6 connector is designed for high-power graphics cards.
- Peripherals (SATA/Molex): Connect SATA power cables for SSDs/HDDs and Molex cables for other peripherals to the 'PERIPHERAL' ports on the PSU.
- Gestione dei cavi: Disporre i cavi in modo ordinato per migliorare il flusso d'aria e l'estetica all'interno del case.
- Collegamento finale: Once all internal connections are made, close your computer case. Connect the AC power cord to the power supply's inlet and then to a grounded wall outlet.
Dettagliato view of the power supply's modular connection panel, indicating dedicated ports for motherboard, CPU, PCIe, and peripheral cables, including the 12V-2x6 connector.
5. Istruzioni per l'uso
After installation, follow these steps to operate your power supply:
- Accensione: Ensure the main power switch on the rear of the power supply is in the 'ON' (I) position. Then, power on your computer using its case power button.
- Modalità ecologica: The FSP Hydro G PRO features an Eco switch. When the Eco switch is engaged (ON), the power supply fan will remain off under loads below 30% of the PSU's rated power, providing silent operation. The fan will automatically activate when the load exceeds 30% or when temperatures rise. If the Eco switch is disengaged (OFF), the fan will operate continuously.
The rear panel of the power supply, featuring the AC power inlet, the main power ON/OFF switch, and the Eco mode toggle switch for silent operation at low loads.
6. Manutenzione
Una corretta manutenzione garantisce la longevità e le prestazioni ottimali del tuo alimentatore.
- Pulizia: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use a soft, dry cloth or compressed air. Ensure the power supply is unplugged before cleaning.
- Rivestimento conforme: This power supply is equipped with an exclusive conformal coating, providing protection against dust, humidity, and other environmental factors. This feature enhances reliability and durability, especially in challenging conditions.
A visual representation of the conformal coating protecting the internal circuitry of the power supply, ensuring reliable operation in challenging environmental conditions.
7. Risoluzione Dei Problemi
Se riscontri problemi con l'alimentatore, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il sistema non si accende. |
|
|
| Il sistema si accende ma si spegne immediatamente. |
|
|
| Fan is not spinning (Eco Mode). |
|
|
If the problem persists after attempting these solutions, please contact FSP customer support.
8. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Nome del modello | HG2 |
| Marca | FSP |
| Dispositivi compatibili | COMPUTER |
| Tipo di connettore | ATX |
| Uscita Wattage | 1000 Watt |
| Fattore di forma | ATX |
| Metodo di raffreddamento | Air (with Eco Mode) |
| Dimensioni articolo (L x P x A) | 6 x 6 x 3.5 pollici (150 mm x 150 mm x 86 mm) |
| Peso dell'articolo | 3.87 chilogrammi |
| Progettazione dell'alimentatore | Completamente modulare |
| Valutazione attuale | 10 Amps |
| Numero di fan | 1 |
| Volume massimo in ingressotage | 132 Volt (CA) |
| Volume minimo di ingressotage | 90 Volt (CA) |
| Valutazione della temperatura superiore | 50 gradi Celsius |
| System Bus Connector Type | 12 Pin or 16 Pin (12V-2x6) |
| Produttore | FSP Group INC |
| Codice UPC | 845685014177 |
| Numero parte produttore | PPA10A2423 |
| Numero di modello | HG2-1000-G5T |
9. Garanzia e supporto
This FSP Hydro G PRO 1000W Power Supply comes with a Garanzia del produttore di 10 anno. For warranty claims, technical support, or any inquiries regarding your product, please contact FSP customer service through their official websito o le informazioni di contatto fornite nella confezione del prodotto.
For additional resources and product information, visit the official FSP websito: www.fsplifestyle.com