JOYSOG Replacement Parts User Manual for Xiaomi E10/C103/B112 Robot Vacuum Cleaner

Introduzione

This manual provides comprehensive instructions for the installation, maintenance, and replacement of JOYSOG accessory parts for Xiaomi E10, C103, and B112 robot vacuum cleaners. Adhering to these guidelines will help ensure optimal performance and extend the lifespan of your vacuum cleaner.

Componenti del prodotto

The JOYSOG replacement kit includes the following components:

• 2 x Main Brushes
• 4 x Filtri
• Spazzole laterali 4 x
• 4 x panni per mocio
• 1 x Spazzola per la pulizia

Immagine: Oltreview di tutti i pezzi di ricambio inclusi.

These parts are specifically designed for compatibility with Xiaomi E10, Xiaomi C103, and Xiaomi B112 robot vacuum cleaner models.

Image: Compatible Xiaomi robot vacuum cleaner models.

Guida all'installazione

Before installing any replacement parts, ensure your robot vacuum cleaner is powered off and disconnected from its charging base.

1. Main Brush Installation

1. Capovolgere il robot aspirapolvere.
2. Individuare il coperchio della spazzola principale, solitamente fissato con chiavistelli o viti. Aprirlo o rimuoverlo.
3. Rimuovere la vecchia spazzola principale.
4. Insert the new JOYSOG main brush, ensuring it clicks into place correctly.
5. Chiudere o riattaccare il coperchio della spazzola principale.

Image: Detail of the main brush, designed with nylon bristles for durability and effective cleaning.

2. Installazione della spazzola laterale

1. Capovolgere il robot aspirapolvere.
2. Individuare le spazzole laterali. In genere sono fissate da una singola vite.
3. Svitare e rimuovere la vecchia spazzola laterale.
4. Align the new JOYSOG side brush with the screw hole and secure it with the screw.

Image: Side brushes featuring an anti-winding design to prevent hair entanglement.

3. Installazione del filtro

1. Open the dustbin compartment of your robot vacuum cleaner.
2. Rimuovere la pattumiera.
3. Locate and remove the old filter from the dustbin.
4. Insert the new JOYSOG filter into the designated slot in the dustbin, ensuring a snug fit.
5. Reinsert the dustbin into the vacuum cleaner and close the compartment.

Image: The filter, designed for effective filtration to eliminate secondary pollution.

4. Installazione del panno per mocio

1. Locate the mop pad attachment on your robot vacuum cleaner.
2. Remove the old mop pad, typically by detaching it from its Velcro or clip fasteners.
3. Attach a new JOYSOG mop pad, ensuring it is securely fastened.

Image: Washable microfiber mop pad, suitable for direct cleaning with water.

Manutenzione

Regular maintenance of your robot vacuum cleaner's accessories is crucial for maintaining its cleaning efficiency.

Spazzola principale e spazzole laterali

• Periodically remove hair and debris tangled around the main brush and side brushes using the provided cleaning brush.
• Inspect brushes for wear and tear. Replace them every 3-6 months, or as needed, depending on usage.

Filtri

• Tap the filter gently over a waste bin to remove accumulated dust.
• Do not wash the filters with water unless explicitly stated by the vacuum cleaner manufacturer, as this can damage the filter material.
• Replace filters every 1-3 months to maintain optimal filtration performance and prevent secondary pollution.

Panni per mocio

• After each use, remove the mop pad and wash it with water.
• The microfiber material is washable and reusable. Allow it to air dry completely before reattaching.
• Replace mop pads every 2-3 months, or when they show signs of significant wear or reduced cleaning effectiveness.

Risoluzione dei problemi

Se riscontri problemi dopo aver sostituito delle parti, tieni presente quanto segue:

• Prestazioni di pulizia ridotte: Ensure all brushes and filters are installed correctly and are free from obstructions. Check if the filters are clogged and require cleaning or replacement.
• Rumori insoliti: Verify that the main brush and side brushes are properly seated and not obstructed by hair or debris.
• Mop Pad Not Mopping Effectively: Ensure the mop pad is clean and wet (if applicable to your vacuum model) and securely attached.

For persistent issues, refer to your robot vacuum cleaner's original user manual or contact the vacuum cleaner manufacturer's support.

Specifiche del prodotto

Immagine: Dimensionale suview of the replacement parts.

Garanzia e supporto

For any questions regarding the JOYSOG replacement parts or for support, please contact the seller directly through your purchase platform. Please note that warranty terms for these accessory parts may differ from the original robot vacuum cleaner's warranty.