MANHATTAN Ultra Slim Rigid TV Wall Mount (Model 461917) Instruction Manual

1. Introduzione

This manual provides detailed instructions for the safe and proper installation and use of your MANHATTAN Ultra Slim Rigid TV Wall Mount, Model 461917. This fixed wall mount is designed to securely hold large flat and curved screen televisions ranging from 60 to 120 inches, with a maximum load capacity of 120 kg (264 lbs). Please read all instructions carefully before installation to ensure optimal performance and safety.

2. Informazioni sulla sicurezza

• Capacità di peso: Do not exceed the maximum load capacity of 120 kg (264 lbs). Exceeding this limit may result in serious injury or property damage.
• Dimensioni dello schermo: Questo supporto è adatto per TV da 60 a 120 pollici.
• Struttura della parete: Ensure the mounting surface (wall) can safely support the combined weight of the mount and your television. Wood studs, solid concrete, or concrete block walls are recommended. Do not install on drywall alone.
• Installazione professionale: If you are unsure about the installation process or the suitability of your wall, consult a qualified professional installer.
• Utensili: Utilizzare strumenti adeguati per l'installazione. Indossare sempre occhiali protettivi.
• Bambini: Tenere i bambini lontani dalla zona di installazione.

3. Contenuto della confezione

Prima di iniziare l'installazione, verificare che tutti i componenti siano presenti e integri.

• Piastra da muro (1)
• Staffe TV (2)
• Kit ferramenta (viti, rondelle, distanziali, tasselli)
• Clip-on Spirit Level (1)

Figura 1: Oltreview of the MANHATTAN Ultra Slim Rigid TV Wall Mount components, including the wall plate and two TV brackets.

4. Specifiche

Figure 2: Illustration of VESA compatibility, showing the range from 50x50 to 900x600.

Figure 3: Detailed technical drawing displaying the dimensions of the wall mount.

5. Configurazione e installazione

5.1. Strumenti necessari (non inclusi)

• Matita
• Trapano
• Trova stud
• Nastro di misurazione
• Chiave a bussola o chiave regolabile
• Cacciavite con testa Phillips

5.2. Attaching TV Brackets to the TV

1. Posizionare con cautela il televisore a faccia in giù su una superficie morbida e pulita per evitare di danneggiare lo schermo.
2. Identifica i fori di montaggio VESA sul retro del televisore.
3. Seleziona dal kit di ferramenta le viti, le rondelle e i distanziali adatti allo schema VESA del tuo televisore.
4. Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are centered and securely fastened. The pull straps should hang freely below the TV.

Figura 4: primo piano view of the quick-release spring lock mechanism on the TV bracket, designed for easy installation and removal.

5.3. Montaggio della piastra a parete alla parete

1. Determine the desired height for your TV. Mark the center point on the wall.
2. Use a stud finder to locate at least two adjacent wood studs. Mark their centers. For concrete walls, ensure you use appropriate concrete anchors (included).
3. Position the wall plate against the wall, aligning its mounting holes with the marked stud centers. Use the included clip-on spirit level to ensure the wall plate is perfectly horizontal.
4. Mark the drilling points through the wall plate holes.
5. Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the chosen lag bolts/anchors.
6. Fissare la piastra a muro alla parete utilizzando i bulloni e le rondelle forniti. Serrare saldamente tutti i bulloni, ma non eccessivamente.

Figure 5: The included clip-on spirit level helps ensure precise horizontal alignment during wall plate installation.

5.4. Appendere la TV

1. With assistance, carefully lift the TV (with brackets attached) and align the TV brackets with the wall plate.
2. Agganciare le staffe per la TV al bordo superiore della piastra a muro.
3. Gently lower the TV until the quick-release spring locks engage, securing the TV to the wall plate. You should hear an audible click.
4. Pull the release straps to ensure the locks are engaged and the TV is securely mounted.

Figura 6: un example of a television securely mounted to the wall using the MANHATTAN Ultra Slim Rigid TV Wall Mount.

6. Funzionamento

Once installed, the MANHATTAN Ultra Slim Rigid TV Wall Mount provides a fixed, low-profile position for your television. To remove the TV from the wall mount:

1. Individuare le cinghie di trazione appese sotto la TV.
2. Pull both straps downwards simultaneously to disengage the quick-release spring locks.
3. With assistance, carefully lift the TV off the wall plate.

7. Manutenzione

• Pulizia: Pulire il supporto con un panno morbido e asciutto. Evitare detergenti abrasivi o solventi.
• Controllo periodico: Controllare periodicamente tutte le viti e i bulloni per assicurarsi che siano sempre ben serrati e sicuri.
• Danno: If any part of the mount appears damaged or worn, do not use it. Contact customer support for assistance.

8. Risoluzione Dei Problemi

• TV non a livello: Ensure the wall plate was installed horizontally using the spirit level. If not, remove the TV, adjust the wall plate, and re-mount.
• TV Not Engaging Locks: Ensure the TV brackets are correctly aligned with the wall plate and that no cables are obstructing the locking mechanism. Pull the straps to confirm engagement.
• Il monte sembra instabile: Immediately remove the TV. Re-check all wall plate fasteners and ensure they are securely anchored into studs or appropriate concrete. Do not re-mount the TV until stability is confirmed.

9. Garanzia e supporto

This MANHATTAN product is covered by a Manufacturer Guarantee. For specific warranty terms, conditions, and duration, please refer to the documentation included with your purchase or visit the official MANHATTAN website. For technical support or assistance with installation, please contact MANHATTAN customer service.

MANHATTAN Customer Support: Please refer to your product packaging or the MANHATTAN websito per informazioni di contatto aggiornate.