Introduzione
This Dorman OE FIX shift cable bushing kit provides a direct replacement solution for worn or broken bushings in your vehicle's shift cable. A failing bushing can lead to a loose shifter feel or difficulty shifting gears. This kit offers a cost-effective and efficient repair alternative to replacing the entire shift cable assembly.
Cosa c'è nella scatola
- 2 x Shift Cable Bushings
Image: The Dorman 14092 Shift Cable Bushing Kit contains two identical replacement bushings.
Compatibilità
This kit is compatible with select Cadillac, Chevrolet, and GMC models. To ensure proper fitment for your specific vehicle, it is crucial to verify compatibility using your vehicle's make, model, and trim level. Refer to the product packaging or Dorman's official website for a detailed application guide.
Informazioni sulla sicurezza
Always prioritize safety when performing vehicle maintenance. Follow these guidelines:
- Indossare adeguati dispositivi di protezione individuale, tra cui occhiali e guanti di sicurezza.
- Ensure the vehicle is securely parked on a level surface with the parking brake engaged.
- If lifting the vehicle, use appropriate jack stands to support it safely. Never rely solely on a jack.
- Allow the vehicle to cool down before working on any components.
- In caso di dubbi su qualche passaggio, consultare un meccanico qualificato.
Setup and Tools Required
Before beginning the installation, gather the following tools and materials:
- New Dorman 14092 Shift Cable Bushing(s)
- Flathead screwdriver or small pry tool
- Pliers (needle-nose or similar)
- Cup of hot water (optional, to soften new bushings for easier installation)
- Vehicle jack and jack stands (if access requires lifting the vehicle)
Installation Instructions (Operating)
Follow these steps to replace the shift cable bushing:
- Preparare il veicolo: Ensure the vehicle is in Park (P) and the parking brake is engaged. If necessary, lift the vehicle safely using a jack and secure it with jack stands to gain access to the shift cable linkage.
- Locate the Damaged Bushing: Identify the worn or broken bushing on the shift cable linkage. This is typically where the shift cable connects to the transmission or shifter mechanism.
- Remove the Old Bushing: Carefully use a flathead screwdriver or small pry tool to remove any remaining pieces of the old bushing from the shift cable end. Ensure all fragments are cleared.
- Prepare the New Bushing (Optional): For easier installation, you may soak the new Dorman bushing in a cup of hot water for 1-2 minutes to soften the material. This can make it more pliable for insertion.
Video: Dorman's helpful installation tips video demonstrates the process of replacing shift cable bushings, including softening the bushing in hot water.
- Install the New Bushing: Align the new bushing with the shift cable end. The end with the "handle" or tab should generally face towards the driver's side for proper orientation and easier installation. Firmly press the new bushing into place. You may use pliers or a small pry tool to help seat it completely until it snaps securely into the linkage.
Image: The new bushing should fit snugly into the shift cable linkage, restoring a tight connection.
- Verifica connessione: Once installed, gently tug on the shift cable to ensure the new bushing is securely seated and there is no excessive play.
- Prova di cambio: With the vehicle still safely supported (if lifted), carefully test the shifter through all gear positions to confirm proper operation.
- Veicolo inferiore: If the vehicle was lifted, safely lower it to the ground.
Manutenzione
The Dorman 14092 Shift Cable Bushing Kit is designed for durability and long-term performance. Regular maintenance typically involves:
- Ispezione periodica: During routine vehicle inspections or oil changes, visually check the shift cable bushings for any signs of wear, cracking, or looseness.
- Pulizia: Keep the area around the shift cable linkage free from excessive dirt and debris, which can contribute to premature wear.
If you notice a return of a loose shifter feel or difficulty shifting, re-inspect the bushings for potential wear or damage.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Shifter feels loose after installation | Bushing not fully seated; incorrect bushing for application; other linkage components worn. | Ensure bushing is fully snapped into place. Verify correct part number for your vehicle. Inspect other shift linkage components for wear. |
| Difficoltà nel cambiare marcia | Bushing not fully seated; shift cable adjustment needed; transmission issue. | Confirm bushing is correctly installed. Check if shift cable requires adjustment (refer to vehicle service manual). If problems persist, consult a professional mechanic. |
| Bushing falls out | Improper installation; incorrect bushing for application; damaged shift cable end. | Re-install bushing, ensuring it snaps securely. Verify correct part number. Inspect shift cable end for damage that prevents secure seating. |
Specifiche
- Numero parte: Dorman 14092
- Peso dell'articolo: 0.64 once
- Dimensioni del prodotto: 0.66 x 1.75 x 5.51 pollici (confezione)
- OEM Part Numbers Replaced: 20787608, 20787611, 20787613
- Materiale: Costruzione in plastica durevole
- Applicazione: Direct replacement for specific Cadillac, Chevrolet, and GMC models.
Immagine: dall'alto verso il basso view of the Dorman 14092 bushings, showing their precise engineering.
Garanzia e supporto
For information regarding product warranty, please refer to the official Dorman Products website or contact Dorman customer support directly. Dorman is committed to providing quality automotive repair solutions.
Dorman Products Inc.
www.dormanproducts.com