CHUANYUE T2 Motorcycle Bluetooth Headset User Manual

1. Introduzione

The CHUANYUE T2 Motorcycle Bluetooth Headset is designed to enhance communication and entertainment for motorcycle riders. This device features Bluetooth 5.0 technology, supporting two-rider intercom communication up to 1000 meters, music sharing, DSP and CVC noise cancellation for clear audio, FM radio, and one-click pairing. It is built with an IP67 waterproof rating and utilizes a Type-C charging port for convenience.

Image: Four CHUANYUE T2 Motorcycle Bluetooth Headsets, illustrating the product units.

2. Cosa c'è nella scatola

Ensure all components are present before installation:

• Mainframe Equipment
• Headset Microphone Sets
• Fixed Installation Bracket
• Sticky Installation Bracket
• Cavo di ricarica di tipo C.
• Manuale d'uso

Immagine: Oltreview of included components and a visual guide for installing the clip and paste brackets.

3. Installazione

3.1. Headset Unit Installation

1. Preparare il casco: Carefully remove the inner padding of your helmet to access the ear areas.
2. Posizionamento dei relatori: Attach the headset speakers to the inside of the helmet using the provided adhesive pads. Ensure they are positioned directly over your ears for optimal audio quality. The short line speaker is for the left side, and the long line speaker is for the right side.
3. Posizionamento del microfono: Secure the microphone inside the helmet, positioning it close to your mouth but away from direct wind.
4. Gestione dei cavi: Route all cables neatly under the helmet padding to prevent discomfort and ensure they are not exposed.

Image: A motorcycle helmet with the T2 headset installed, connected to a GPS device, demonstrating integrated use.

3.2. Montaggio dell'unità principale

Choose between the fixed clip bracket or the adhesive paste bracket:

3.2.1. Clip Bracket Installation

1. Open the metal piece of the clip bracket.
2. Slide the bracket onto the edge of the helmet shell, ensuring a secure fit.
3. Insert the main unit into the clip bracket until it locks into place.

3.2.2. Paste Bracket Installation

1. Pulire accuratamente la zona di montaggio desiderata sulla superficie del casco.
2. Peel off the red protective film from the adhesive on the paste bracket.
3. Firmly press the bracket onto the helmet surface for at least 30 seconds. Allow sufficient time for the adhesive to cure before use.
4. Slide the main unit into the paste bracket until it clicks securely.

4. Istruzioni per l'uso

4.1. Accensione/spegnimento

• Accensione: Tenere premuto il pulsante multifunzione per circa 3 secondi finché la spia non si accende.
• Spegni: Tenere premuto il pulsante multifunzione per circa 3 secondi finché la spia non si spegne.

4.2. Accoppiamento Bluetooth con dispositivo mobile

1. Ensure the T2 headset is powered off.
2. Press and hold the multi-function button for approximately 5-7 seconds until the red and blue indicator lights flash alternately, indicating pairing mode.
3. Sul tuo cellulare, attiva il Bluetooth e cerca i dispositivi disponibili.
4. Select "T2" from the list of devices to connect. Once connected, the blue indicator light will flash slowly.

4.3. Abbinamento interfono (2 motociclisti)

1. Ensure both T2 headsets are powered off.
2. On both headsets, press and hold the multi-function button for approximately 5-7 seconds until the red and blue indicator lights flash alternately.
3. On one of the headsets, short press the intercom button. The headsets will search for each other and automatically pair.
4. Once paired, the indicator lights on both headsets will turn solid blue, indicating a successful intercom connection.

Image: Two riders on motorcycles, illustrating the two-way intercom communication feature.

4.4. Riproduzione e condivisione di musica

• Riproduci/Pausa: Short press the multi-function button to play or pause music.
• Traccia successiva: Rotate the multi-function knob clockwise.
• Traccia precedente: Rotate the multi-function knob counter-clockwise.
• Regolazione del volume: Press and hold the volume up/down buttons.
• Condivisione di musica: (Specific instructions for music sharing between two T2 units would be here if available, but are not detailed in the provided data. Generally, this involves a specific button press on both devices after they are paired.)

4.5. Telefonate

• Rispondi alla chiamata: Premere brevemente il pulsante multifunzione quando si riceve una chiamata.
• Termina chiamata: Premere brevemente il pulsante multifunzione durante una chiamata.
• Rifiuta chiamata: Quando arriva una chiamata, tenere premuto il pulsante multifunzione per 2 secondi.
• Composizione vocale (Siri/Assistente Google): Long press the multi-function button for 2 seconds to activate your phone's voice assistant.

Image: A helmet with the T2 headset, showing a smartphone screen with voice assistant commands, highlighting the voice control feature.

4.6. Radio FM

• Attiva/disattiva FM: Double-click the multi-function button to activate or deactivate the FM radio.
• Cambia stazione: Rotate the multi-function knob clockwise or counter-clockwise to scan for stations.

5. Manutenzione

• Pulizia: Utilizzare un morbido, damp cloth to clean the exterior of the headset. Avoid harsh chemicals or abrasive materials.
• Resistenza all'acqua: The T2 headset is IP67 waterproof. While it can withstand rain and splashes, avoid submerging it in water for extended periods.
• Ricarica: Utilizzare il cavo di ricarica Type-C in dotazione. Assicurarsi che la porta di ricarica sia asciutta prima di collegare il cavo.
• Magazzinaggio: Quando non vengono utilizzate, conservare le cuffie in un luogo fresco e asciutto.

Image: The T2 headset shown with water splashing, highlighting its IP67 waterproof feature.

6. Risoluzione Dei Problemi

• Nessun potere: Ensure the battery is charged. Connect the headset to the charger and check the indicator light.
• Impossibile associare: Make sure the headset is in pairing mode (red and blue lights flashing alternately). Ensure your phone's Bluetooth is on and visible. Try restarting both devices.
• Disconnessione dell'interfono: If the intercom disconnects, try re-pairing the units. Ensure they are within the specified range.
• Scarsa qualità audio: Check speaker placement inside the helmet. Ensure the microphone is not obstructed. Verify that noise cancellation features (DSP & CVC) are active.
• L'assistente vocale non risponde: Ensure your phone is connected via Bluetooth and the voice assistant is enabled on your device.

7. Specifiche

8. Garanzia e supporto

For warranty information, technical support, or any inquiries regarding your CHUANYUE T2 Motorcycle Bluetooth Headset, please refer to the contact details provided in the packaging or visit the official CHUANYUE webluogo. Conserva la ricevuta di acquisto per eventuali richieste di garanzia.