1. Introduzione
Thank you for choosing the DIHOOL Electric Scissor Lift Table, Model DHLCT-150. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new lift table. Please read this manual thoroughly before use and retain it for future reference.
2. Informazioni sulla sicurezza
Always prioritize safety when operating the lift table. Failure to follow these instructions may result in injury or damage to the equipment.
- Capacità di peso: Non superare la capacità di carico massima di 150 kg (350 libbre). Il sovraccarico può causare instabilità e danni.
- Superficie stabile: Ensure the lift table is placed on a flat, stable, and level surface before operation.
- Rilevamento degli ostacoli: The system includes obstruction/resistance detection. If an unusual current spike is detected, the lift will stop or rebound to prevent accidents. Do not intentionally obstruct the lift during operation.
- Fonte di energia: Use the provided AC100-240V adapter or a DC24V-30V power source. If using a 12V power source, a 12V to 24V DC step-up converter (120W+ required) is necessary.
- Funzionamento continuo: Avoid continuous long-term operation. The maximum continuous runtime is 20 minutes to prevent motor overheating.
- Bambini e animali domestici: Keep children and pets away from the lift table during operation.
- Manutenzione: Regularly inspect the lift table for any signs of wear or damage. Do not operate if damaged.
- Arresto di emergenza: Familiarize yourself with how to quickly disconnect power in an emergency.
3. Contenuto della confezione
Verificare che tutti i componenti siano presenti al momento del disimballaggio:
- Electric Scissor Lift Table (main unit)
- DC Motor Controller (Model: IPS-S2)
- Wireless Remote Controller (battery not included, Model 23A)
- Wired Handle Controller (2.5m cable)
- Adattatore di alimentazione CA/CC
- Adjustable Feet (pre-installed or to be installed)
4. Prodotto finitoview e Caratteristiche
The DIHOOL Electric Scissor Lift Table is designed for versatile lifting applications, offering quiet operation and robust construction.
- Alta capacità: Supports loads up to 350 lbs (150 kg).
- Altezza regolabile: Lifting stroke of 19.09 inches (485mm), adjusting from 7.68 inches (195mm) to 26.77 inches (680mm).
- Funzionamento silenzioso: Equipped with an upgraded high-torque motor, operating under 50dB.
- Caratteristiche di sicurezza: Obstruction/resistance detection, self-locking function, and built-in limit switch.
- Metodi di controllo: Wireless remote, wired handle, and WiFi control via eWelink APP.
- Costruzione durevole: Built with robust steel materials and an X-shaped frame for stability.
5. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Modello | DHLCT-150 |
| Capacità di carico | 150kg / 330lbs (Note: Product title states 350lbs, specifications state 330lbs. Refer to product listing for exact model capacity.) |
| Velocità a vuoto | 10mm/s, 0.4inch/s |
| Altezza minima | 195 mm / 7.68 pollici |
| Altezza massima | 680 mm / 26.77 pollici |
| Colpo | 485 mm / 19.09 pollici |
| Dimensioni (L*W*H) | 760*430*195 millimetri/29.92*16.93*7.68 pollici |
| Peso | 16kg / 35lbs (Product listing states 37.4 pounds) |
| Voltage | CC 24V |
| Trattamento superficiale | Nero elettroforetico |
| Temperatura di esercizio | Temperatura di esercizio -10°C ~ +65°C |
| Grado IP | Grado di protezione IP43 |
6. Configurazione e installazione
The DIHOOL Electric Scissor Lift Table comes pre-assembled and pre-wired for ease of use. Follow these steps for initial setup:
6.1 Disimballaggio e posizionamento
- Rimuovere con attenzione tutti i componenti dalla confezione.
- Place the lift table on a stable, level surface where it will be used.
- Ensure there is sufficient clearance around the table for safe operation and to avoid obstructions.
6.2 Connecting Power and Controls
- Connect the DC Motor Controller to the lift table's motor and power input. The unit is pre-wired, so simply ensure connections are secure.
- Plug the AC/DC Power Supply Adapter into the DC Motor Controller.
- Plug the AC/DC Power Supply Adapter into a standard AC 100-240V wall outlet.
- Connect the wired handle controller to the designated port on the DC Motor Controller.
- For wireless remote control, ensure a Model 23A battery is inserted (not included).
- For WiFi control, download the eWelink APP from your device's app store and follow the in-app instructions to pair with the controller.
7. Istruzioni per l'uso
The lift table offers multiple control options for convenience and flexibility.
7.1 DC Motor Controller (IPS-S2) Overview
The IPS-S2 controller features a digital display and several buttons for direct control and setting adjustments:
- B1: UP button for lifting the platform.
- B2: DOWN button for lowering the platform.
- K1, K2, K3: Function setting buttons.
- L: Standby time setting.
7.2 Functional Operation and Settings
The controller allows for advanced settings to customize operation and safety:
| Codice funzione | Descrizione della funzione | Intervallo di valori | Valore predefinito |
|---|---|---|---|
| A | Current Limit For Up (Set the limited current value for the moving up (Amp)) | Da A00.1 a A10.0 | 4.2 |
| B | Current Limit For Down (Set the limited current value for the moving down (Amp)) | Da B00.1 a B10.0 | 1 |
| C | Running Time (Set the running time of the motor (Seconds)) | Da C000 a C999 | 80 |
| D | Current Limit For Rebound (Set the Current Rate of Change for moving down (Amp)) | Da 00.1 a 02.0 | 00.3 |
| E | Rebound Time (Set the running time during rebound (Seconds)) | E001-E999 | 001 |
| F | Ridurre il volumetage For Down (Set the Reduce percentage di volumetage during lifting down (Percentage)) | F020-F093 | 093 |
| L | Standby Time (Set the standby time of the screen (Minutes)) | Da L000 a L999 | 005 |
To enter function settings, press the K1 button for 3 seconds. Use K2 and K3 to adjust values. The limited current value can be adjusted based on actual operation conditions. For initial use, the current for the first time running may be higher; you can set a lower current value after several runs. This helps prevent motor damage and extends equipment lifespan.
Metodi di controllo 7.3
- Telecomando senza fili: Use the UP and DOWN buttons on the remote to control the lift. The remote has a range of up to 30 meters.
- Wired Handle: Use the UP and DOWN buttons on the wired handle for direct control. The cable length is 2.5m.
- Pulsanti del controller: Use the B1 (UP) and B2 (DOWN) buttons directly on the IPS-S2 controller.
- eWelink APP (WiFi Control): Download the eWelink APP to control the lift via WiFi. This allows for advanced features and automation.
- External Switches: The controller supports connection to external switches such as Photoelectric Switch, Inductive Switch, Push Button, Pedal Button, or Relays for customized control.
- Sollevamento automatico: Can be configured to achieve automatic lifting based on control signals.
- Modalità espositiva: Can be set to run automatically for exhibition displays.
8. Manutenzione
Regular maintenance ensures the longevity and safe operation of your DIHOOL Electric Scissor Lift Table.
- Pulizia: Wipe down the lift table with a damp stoffa. Evitare l'uso di prodotti chimici aggressivi o detergenti abrasivi.
- Lubrificazione: Periodically lubricate the scissor mechanism pivot points and the linear actuator screw with a suitable lubricant to ensure smooth operation and prevent wear.
- Ispezione: Regularly check all bolts, nuts, and connections for tightness. Inspect the power cable and control cables for any signs of damage or fraying.
- Motor and Actuator: Listen for unusual noises during operation. If any abnormal sounds or movements occur, discontinue use and troubleshoot.
- Magazzinaggio: When not in use for extended periods, store the lift table in a dry, clean environment.
9. Risoluzione Dei Problemi
Per i problemi più comuni e le relative soluzioni, fare riferimento alla tabella sottostante.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Lift does not move | No power, loose connection, remote battery dead, motor overload. | Check power adapter and wall outlet. Ensure all cables are securely connected. Replace remote battery. Reduce load if overloaded. |
| Lift moves slowly or with difficulty | Overload, insufficient power, lack of lubrication, obstruction. | Reduce load. Check power supply. Lubricate moving parts. Remove any obstructions. |
| Lift stops unexpectedly | Obstruction detection triggered, motor overheating, power interruption. | Remove obstruction. Allow motor to cool down. Check power connection. |
| Il telecomando non funziona | Batteria scarica, fuori portata, interferenza. | Replace battery (Model 23A). Move closer to the lift table. Reduce potential interference. |
| WiFi control not connecting | Incorrect pairing, WiFi signal issue, APP error. | Re-pair the device via the eWelink APP. Check WiFi signal strength. Restart the APP or your device. |
If the problem persists after attempting these solutions, please contact DIHOOL customer support.
10. Garanzia e supporto
DIHOOL products are designed for quality and durability. For warranty information and customer support, please refer to the 'Protection To Fix Card' included with your product or contact DIHOOL directly through their official channels. Please provide your purchase store, order number, name, contact information, and a detailed quality problem statement when seeking support.
Note: Maintenance is not provided for situations such as unauthorized disassembly, improper use, natural disasters, or force majeure events.