SHNITPWR 144W Universal Adjustable DC Power Supply (9V-36V, 4A)

1. Introduzione

This manual provides essential information for the safe and effective operation of your SHNITPWR 144W Universal Adjustable DC Power Supply. This device is designed to convert AC input (100-240V) to a variable DC output (9-36V) with a maximum current of 4A and a maximum power of 144W. It is suitable for powering a wide range of small electronic devices.

2. Informazioni sulla sicurezza

Avvertenze di sicurezza importanti:

• This product is an AC to DC adapter, not a battery charger. It cannot be used to charge electronic devices with built-in batteries, such as laptops.
• Always select the correct output voltage before connecting the power supply to your device. Incorrect voltage settings can cause severe damage to your electronic equipment.
• For optimal performance and longevity, it is recommended to operate the power supply at less than 80% of its full load capacity. Exceeding this limit may cause overheating and shorten the product's lifespan.
• Questo dispositivo è destinato esclusivamente all'uso in ambienti interni. Non esporlo ad acqua, umidità o ambienti eccessivamente umidi.
• Non smontare o modificare l'alimentatore. Per qualsiasi intervento di manutenzione, rivolgersi a personale qualificato.

The SHNITPWR power supply incorporates multiple safety protection systems:

• oltre il volumetage Protezione: Automatically cuts off power if output voltage supera i limiti di sicurezza.
• Protezione da sovracorrente: Previene i danni causati da un assorbimento eccessivo di corrente.
• Protezione da sovratemperatura: Si spegne se la temperatura interna diventa troppo alta.
• Protezione da cortocircuito: Safeguards against short circuits in the connected device.
• Protezione dalle onde elettromagnetiche: Riduce al minimo le interferenze elettromagnetiche.

Figure 1: Built-in Safety Protection Systems.

Figure 2: Recommendation to use the power supply at 80% or less of its maximum load.

3. Contenuto della confezione

Verificare che tutti gli articoli siano presenti nel pacco:

• 1 x SHNITPWR 144W Universal Adjustable DC Power Supply
• 1 x AC Input Power Cable
• 14 x Frequently Used DC Output Tips
• 1 x Polarity Converter Cable
• 1 x DC Terminal Connector

Figure 3: SHNITPWR Universal Power Supply and included accessories.

Figure 4: Included DC Output Tips and Polarity Converter.

4. Prodotto finitoview

The SHNITPWR 144W Universal Adjustable DC Power Supply features a compact design with an integrated LCD display and a rotary knob for voltage adjustment. The unit is designed for ease of use and portability.

Caratteristiche principali:

• Uscita regolabile Voltage: Continuously variable from 9V to 36V DC.
• Schermo LCD: Mostra il volume di uscita correntetage for precise setting.
• Ampio ingresso voltage: AC 100-240V, 50/60Hz, suitable for international use.
• Uscita ad alta potenza: Up to 4A current and 144W power.
• Improved Adjustment Knob: Allows for more even and precise voltage regolamento.
• Integrated Power Off Function: The adjustment knob includes an 'off' position to power down the unit without unplugging.

Figure 5: Adjustable DC Output Voltage Intervallo.

Figura 6: Design compatto e dimensioni.

5. Impostazione

1. Collegare l'alimentazione CA: Plug the AC input power cable into the power supply and then into a standard wall outlet (100-240V AC).
2. Select DC Tip: Identify the correct DC output tip for your device. The kit includes 14 common tips, including various barrel sizes, Micro-USB, Type-C, and a DC terminal connector.
3. Controllare la polarità: Most devices use center-positive polarity. If your device requires center-negative polarity, use the included polarity converter cable. Always verify your device's polarity requirements before connecting.
4. Attach DC Tip: Connect the selected DC tip to the output cable of the power supply.

6. Istruzioni per l'uso

1. Accensione: Ruota il voltage adjustment knob clockwise from the 'OFF' position. The LCD display will illuminate, showing the current output voltage.
2. Regola voltage: Slowly rotate the knob to set the desired output voltage. The LCD display will show the voltage in real-time. Ensure the voltage matches your device's requirements precisely.
3. Connetti dispositivo: Una volta che il voltage is set and verified, connect the DC output tip to your electronic device.
4. Monitorare il funzionamento: Observe your device for proper function. If any issues arise, immediately disconnect the power supply.
5. Spegni: To turn off the power supply, rotate the voltage adjustment knob counter-clockwise until it clicks into the 'OFF' position. This will cut power without needing to unplug the unit.

Applicazioni:

This power supply is suitable for a wide range of 9V-36V small household electronics, including but not limited to:

• Strisce LED
• Under-cabinet lights
• TV boxes
• Altoparlanti intelligenti
• Router senza fili
• Essential oil diffusers/humidifiers
• Ventole USB
• Wi-Fi cameras
• Hub USB
• Hard disk enclosures
• DC motors and pumps
• Digital photo frames
• DVR/NVR surveillance systems

Figure 7: Wide Range of Applications for the Power Supply.

7. Manutenzione

• Keep the power supply clean and dry. Avoid exposure to dust, dirt, and liquids.
• Conservare l'unità in un luogo fresco e asciutto quando non viene utilizzata.
• Regularly inspect cables and connectors for any signs of damage. Do not use if cables are frayed or connectors are bent.
• Do not block the ventilation openings on the power supply, as this can lead to overheating.

8. Risoluzione Dei Problemi

Problemi comuni e soluzioni:

• No Power Output / LCD Not Lighting Up:
  • Ensure the AC power cable is securely plugged into both the power supply and the wall outlet.
  • Controllare che la presa a muro funzioni.
  • Verificare che il volumetage adjustment knob is rotated past the 'OFF' position.
• Il dispositivo non si accende:
  • Confirm that the correct output voltage is selected for your device.
  • Ensure the DC output tip is securely connected to your device.
  • Check the polarity of the connection. Use the polarity converter cable if your device requires center-negative.
  • Verificare che i requisiti di alimentazione del dispositivo (voltage and current) do not exceed the power supply's capabilities (36V, 4A, 144W).
• Instabile voltage Output (under load):
  • This power supply is designed for stable output. If voltage fluctuates significantly under load, ensure the load does not exceed 80% of the maximum capacity (e.g., for 144W, keep load below 115W).
  • Ensure all connections are firm and free from corrosion.
  • If the issue persists, the connected device might be drawing too much current or have an internal fault.
• Power Supply Overheating:
  • Reduce the load on the power supply to below 80% of its maximum capacity.
  • Ensure adequate ventilation around the unit. Do not cover it.
  • If overheating continues, disconnect immediately and contact support.

9. Specifiche

10. Garanzia e supporto

The SHNITPWR 144W Universal Adjustable DC Power Supply comes with a Garanzia di 24 mesi dalla data di acquisto, coprendo difetti di fabbricazione e malfunzionamenti in condizioni di normale utilizzo.

If you encounter any issues or have questions regarding the product, please contact SHNITPWR customer support. Provide your model number (SNT-0936-144W) and a detailed description of the problem for efficient assistance.

For support, please refer to the contact information provided with your purchase or visit the official SHNITPWR websito.