Varmilo VPE87 Chang'e TKL Mechanical Keyboard User Manual

Introduzione

The Varmilo VPE87 TKL mechanical keyboard is designed for versatility and a premium typing experience. It features triple-mode connectivity (wired, Bluetooth, and 2.4 GHz wireless), hotswap sockets for switch customization, and a white LED backlight. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your keyboard.

Contenuto della confezione

• Varmilo VPE87 Mechanical Keyboard
• Cavo USB-C
• 2.4 GHz Wireless Receiver (typically stored in keyboard)
• Estrattore per tasti (potrebbe essere incluso)
• Estrattore per interruttori (potrebbe essere incluso)

Impostare

Before using your Varmilo VPE87 keyboard, please follow these steps to set it up.

1. Physical Connection and Initial Charge

Image: USB-C port and 3-way cord channel. The USB-C port is located on the back of the keyboard, designed to allow the cable to exit from the left, right, or center for tidy cable management.

1. Collegare il cavo USB-C in dotazione alla porta USB-C della tastiera.
2. Connect the other end of the USB-C cable to an available USB port on your computer or a USB power adapter.
3. For wireless use, ensure the keyboard is sufficiently charged. The white LED backlight will indicate charging status (specific indicator behavior may vary, refer to LED section).

2. Adjusting Keyboard Angle

Immagine: Pro lateralefile with kickstand extended. The keyboard features a 2-step kickstand on the underside, allowing users to adjust the typing angle for ergonomic comfort.

The VPE87 features a 2-step kickstand on its underside. Gently flip out the kickstands to adjust the keyboard's angle to your preferred typing position.

Istruzioni per l'uso

Modalità di connettività

The Varmilo VPE87 supports three connectivity modes: Wired, Bluetooth, and 2.4 GHz Wireless. You can switch between modes using the dedicated switch or key combinations, typically located on the back or side of the keyboard.

Modalità cablata

• Collega il cavo USB-C dalla tastiera al computer.
• La tastiera verrà riconosciuta automaticamente dal sistema operativo.
• This mode also charges the keyboard's internal battery.

Modalità Bluetooth

• Ensure the keyboard is in Bluetooth mode (check the switch on the back/side).
• Sul tuo dispositivo (computer, tablet, smartphone), attiva il Bluetooth e cerca nuovi dispositivi.
• Select "Varmilo VPE87" (or similar name) from the list of available devices.
• Follow any on-screen prompts to complete pairing. The keyboard may support multiple Bluetooth profiles (e.g., Fn + 1, 2, 3 for different devices). Refer to specific key combinations for your model.

Modalità wireless a 2.4 GHz

• Locate the 2.4 GHz USB receiver (often stored in a compartment on the keyboard's underside).
• Collega il ricevitore USB a una porta USB disponibile sul tuo computer.
• Ensure the keyboard is in 2.4 GHz wireless mode (check the switch on the back/side).
• La tastiera dovrebbe connettersi automaticamente al ricevitore.

Controllo della retroilluminazione

Image: Keyboard with white LED backlight. The white LED backlight enhances visibility of the keycaps, especially in low-light conditions.

The VPE87 features a white LED backlight. Use the following key combinations to control the backlight:

• Fn + Arrow Up: Aumentare la luminosità della retroilluminazione.
• Fn + Arrow Down: Decrease backlight brightness / Turn off backlight.
• Fn + Altri tasti: (Specific to model) May control backlight effects or modes. Refer to the keyboard's keycap legends for additional functions.

Hotswap Sockets (Switch Customization)

Immagine: in alto view of the Varmilo VPE87 keyboard. This image displays the keyboard's layout and the artistic design on its keycaps and case, highlighting its aesthetic appeal.

The VPE87 is equipped with hotswap sockets, allowing you to change mechanical switches without soldering. This enables customization of your typing feel.

1. Rimuovere il tasto: Utilizzare un estrattore per tasti per rimuovere delicatamente il tasto desiderato.
2. Rimuovi interruttore: Utilizzare un estrattore per interruttori per afferrare con cautela le clip superiore e inferiore dell'interruttore e tirarlo verso l'alto.
3. Inserisci nuovo switch: Align the pins of the new switch with the holes in the hotswap socket. Gently push the switch straight down until it clicks into place. Ensure pins are not bent.
4. Sostituisci il tasto: Riposizionare il tasto sul nuovo interruttore.

Note: Ensure the keyboard is disconnected or powered off before swapping switches. Use compatible 3-pin or 5-pin mechanical switches.

Altre caratteristiche

• Double-layer Silicone Sound Absorption: This design minimizes typing noise for a quieter experience.
• 3-Way Cord Channel: The USB-C cable can be routed from the left, right, or center of the keyboard's underside for neat cable management.

Manutenzione

Proper maintenance ensures the longevity and performance of your Varmilo VPE87 keyboard.

• Pulizia dei tasti:
  • Use a keycap puller to remove keycaps.
  • Pulisci i tasti con la pubblicitàamp panno e soluzione di sapone delicato. Evitare prodotti chimici aggressivi.
  • Ensure keycaps are completely dry before reattaching.
• Pulizia del corpo della tastiera:
  • Utilizzare un panno morbido e asciutto per pulire la superficie della tastiera.
  • Per rimuovere polvere e detriti tra i tasti, utilizzare aria compressa.
• Magazzinaggio: Conservare la tastiera in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• Fuoriuscite di liquidi: In case of a liquid spill, immediately disconnect the keyboard, turn it upside down to drain, and allow it to dry completely for at least 24-48 hours before attempting to use it again. Do not use a hairdryer or heat gun.

Risoluzione dei problemi

If you encounter issues with your Varmilo VPE87 keyboard, try the following solutions:

Specifiche

Garanzia e supporto

Varmilo products are designed for quality and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official Varmilo websito.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Varmilo customer service through their official channels. You can often find support contact information on the brand's official websito o tramite il rivenditore presso cui hai acquistato il prodotto.

Visit the official Varmilo Store for more information: Varmilo Store on Amazon