Total TCS2241008

Total TCS2241008 100 Liter Air Compressor Instruction Manual

Model: TCS2241008 | Brand: Total

1. Introduzione e oltreview

The Total TCS2241008 is a heavy-duty, direct-drive air compressor designed for industrial and workshop applications. It features a powerful 2 x 1200W (3.2 HP) motor and an oil-free system, providing efficient and consistent air compression. With a large 100-liter tank, it ensures a stable and reliable supply of compressed air for various pneumatic tools and equipment, reducing motor cycling frequency.

This compressor is an essential tool for professionals in fields such as car repair, carpentry, and other industrial operations requiring a dependable source of compressed air.

Total TCS2241008 100 Liter Air Compressor

Image: The Total TCS2241008 air compressor, showcasing its robust design, 100-liter tank, and control panel.

2. Istruzioni di sicurezza

Always prioritize safety when operating the air compressor. Failure to follow these instructions may result in serious injury or property damage.

  • Sicurezza elettrica: Assicurarsi che l'alimentazione corrisponda al volume del compressoretage (220-240V, 50Hz). Use a grounded outlet and avoid using extension cords unless absolutely necessary and rated for the compressor's power. Never operate with wet hands or in damp condizioni.
  • Sicurezza della pressione: Do not exceed the maximum operating pressure of 8 Bar. Always wear appropriate eye protection when working with compressed air. Never direct compressed air at people or animals.
  • Ventilazione: Utilizzare il compressore in un'area ben ventilata per evitare il surriscaldamento e garantire un'adeguata aspirazione dell'aria.
  • Dispositivi di protezione individuale (DPI): Always wear safety glasses or goggles. Hearing protection is recommended due to the 75 dB noise level.
  • Stabilità: Place the compressor on a stable, level surface to prevent tipping. Ensure wheels are locked if applicable.
  • Manutenzione: Disconnect power before performing any maintenance or repairs. Regularly inspect hoses, fittings, and the tank for damage.
  • Bambini e astanti: Tenere i bambini e le persone non autorizzate lontano dall'area operativa.

3. Componenti del prodotto

The Total TCS2241008 air compressor includes the following main components:

  • Serbatoio d'aria: Capacità di 100 litri per lo stoccaggio di aria compressa.
  • Unità motore: Two 1200W (total 2400W / 3.2 HP) copper wire motors with a direct drive system.
  • Manometri: Visualizza la pressione del serbatoio e la pressione di uscita regolata.
  • Regolatore di pressione: Permette la regolazione della pressione dell'aria in uscita.
  • Valvola di sicurezza: Rilascia automaticamente la pressione se supera un limite di sicurezza.
  • Valvola di drenaggio: Situato sul fondo del serbatoio per lo scarico della condensa.
  • Prese d'aria: Connections for air hoses and pneumatic tools.
  • Ruote e maniglia: Per la portabilità e la facilità di movimento.

4. Impostazione

Per la configurazione iniziale del compressore d'aria, seguire questi passaggi:

  1. Disimballaggio: Carefully remove the compressor from its plywood packaging. Inspect for any shipping damage.
  2. Posizionamento: Posizionare il compressore su una superficie solida e piana, in un'area ben ventilata. Assicurarsi che vi sia spazio sufficiente attorno all'unità per la circolazione dell'aria.
  3. Montaggio ruote (se necessario): Attach the wheels and handle according to the diagrams in the separate assembly guide (if provided).
  4. Collegamento elettrico: Connect the power cord to a grounded 220-240V, 50Hz electrical outlet. Ensure the power switch is in the 'OFF' position before plugging in.
  5. Check Drain Valve: Prima dell'uso, assicurarsi che la valvola di scarico sul fondo del serbatoio sia chiusa.

5. Istruzioni per l'uso

To operate your Total TCS2241008 air compressor:

  1. Collegare il tubo dell'aria: Attach your air hose and pneumatic tool to the air outlet.
  2. Accensione: Flip the power switch to the 'ON' position. The compressor will begin to fill the tank with air.
  3. Monitorare la pressione: Observe the tank pressure gauge. The compressor will automatically shut off when the maximum pressure (8 Bar) is reached.
  4. Regolare la pressione di uscita: Use the pressure regulator knob to set the desired working pressure for your pneumatic tool. The regulated pressure will be shown on the output pressure gauge.
  5. Inizia il lavoro: Once the desired pressure is set, you can begin using your pneumatic tool. The compressor will cycle on and off automatically to maintain tank pressure.
  6. Spegni: Al termine, portare l'interruttore di alimentazione in posizione "OFF".
  7. Depressurizzare: Before disconnecting tools or hoses, release any remaining air pressure from the tank by opening the drain valve or using an air tool until the gauges read zero.

6. Manutenzione

Regular maintenance ensures optimal performance and extends the lifespan of your air compressor. Always disconnect power before performing maintenance.

  • Drain Condensation Daily: Open the drain valve at the bottom of the tank daily after use to release accumulated moisture. This prevents rust and corrosion inside the tank.
  • Filtro dell'aria pulito: Periodically inspect and clean the air filter. A clogged filter reduces efficiency. Replace if damaged.
  • Ispezionare tubi flessibili e raccordi: Check air hoses and fittings for cracks, leaks, or damage before each use. Replace any worn or damaged components.
  • Controllare i collegamenti elettrici: Assicurarsi che tutti i collegamenti elettrici siano sicuri e privi di danni.
  • Esterno pulito: Mantenere l'esterno del compressore pulito e privo di polvere e detriti.
  • Oil-Free System: This compressor features an oil-free system, eliminating the need for oil changes or lubrication of the pump.

7. Risoluzione Dei Problemi

Per problemi comuni e relative soluzioni, fare riferimento a questa sezione:

ProblemaPossibile causaSoluzione
Il compressore non si avviaNessuna alimentazione, interruttore automatico scattato, interruttore difettosoControllare il collegamento elettrico, ripristinare l'interruttore, contattare l'assistenza.
Il compressore funziona continuamenteAir leak, faulty pressure switchCheck for leaks in hoses/fittings, contact service for pressure switch.
Bassa pressione dell'aria in uscitaPressure regulator set too low, air leak, clogged air filterRegolare il regolatore, verificare eventuali perdite, pulire/sostituire il filtro dell'aria.
Rumore o vibrazioni eccessiviLoose components, uneven surfaceCheck for loose bolts, ensure stable placement.
Safety valve releases airTank pressure too high, faulty pressure switchThis is a safety feature. If it occurs frequently, contact service.

If you encounter problems not listed here or if solutions do not resolve the issue, please contact Total customer support.

8. Specifiche

Numero di modelloTCS2241008
MarcaTotale
Potenza in ingresso2 x 1200W (2400W Total / 3.2 HP)
Voltage220-240 V ~ 50 Hz
Capacità del serbatoio100 litri (26.4 galloni)
Pressione di esercizio massima8 barra
Velocità a vuoto2850 giri al minuto
Livello di rumore75 dB
Tipo di motoreDirect Drive, Copper Wire
Sistema di lubrificazioneSenza olio
Dimensioni del prodotto (L x P x A)Dimensioni: 90 x 60 x 80 cm
Peso209 grams (Note: This weight seems unusually low for a 100L compressor and might be a typo in the source data. Please verify with manufacturer.)
ColoreBlu
Componenti inclusi1 x Total TCS2241008 Air Compressor

9. Garanzia e supporto

For warranty information, technical support, or service inquiries regarding your Total TCS2241008 air compressor, please refer to the warranty card included with your product or contact Total customer service directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.