1. Introduzione
1.1 Prodotto finitoview
The Cerakote Professional Ceramic Coating for Cars is a high-gloss, professional-grade paint protection kit designed to provide ultra-hydrophobic, UV, and chemical-resistant properties. This easy-to-apply kit ensures long-lasting protection for up to 500 real-world car washes, keeping your vehicle looking new with minimal effort. It safeguards against scratches, chemical stains, and fading, creating a super-hydrophobic surface that repels water and contaminants.
Figure 1: Cerakote Professional Ceramic Coating Kit
1.2 Cosa è incluso
- (2) 30 mL Bottles of Professional Ceramic Paint Coating
- (1) High Quality Microfiber Applicator
- (1) Set of In-Depth Instructions
Figure 2: Kit contents within the packaging
2. Impostazione
2.1 Preparazione
Proper preparation is crucial for optimal results. Ensure the vehicle's paint is already corrected, which may include clay bar treatment and paint correction to remove imperfections. The application should be performed in a clean environment, out of direct sunlight, and on a cool-to-touch surface.
Before applying the coating, wipe the paint with isopropyl alcohol to remove any residue from the paint correction process. This ensures a clean surface for the ceramic coating to bond effectively.
Video 1: Professional Ceramic Paint Coating Application Video. This video demonstrates the full application process, including preparation steps.
3. Istruzioni per l'uso
3.1 Processo di richiesta
- Agita la bottiglia: Shake the bottle of Cerakote Professional Ceramic Paint Coating for approximately 30 seconds to ensure the contents are well mixed.
- Preparare l'applicatore: Thoroughly wet your microfiber application pad with the coating. The pad should feel slick and glide easily across the surface. You will need to rewet the pad for each new section you work on.
- Applica alla superficie: Apply the coating to the vehicle's paint using a cross-hatch application method. Work in manageable sections, typically 3-foot sections, to ensure even coverage.
- Ispezionare: After applying to a section, inspect it carefully to ensure there are no missed areas. Touch up as needed.
- Imposta timer: Start a timer for 5 minutes. During this time, you may notice the coating start to 'sweat' or 'bead' on the surface; this is normal.
- Buffo: After the 5 minutes are up, begin buffing the coated surface using new, high-quality microfiber cloths. A two-towel buffing method is recommended: use the first towel to level and remove any excess coating, and the second towel to buff to a deep shine.
Figure 3: Applying the coating to the applicator pad
Figure 4: Applying the coating to the vehicle's surface
Figure 5: Buffing the coated surface for a brilliant shine
3.2 Hydrophobic Properties
The applied coating creates an ultra-hydrophobic surface, causing water to bead and roll off, which significantly reduces the need for frequent washing and makes cleaning easier.
Video 2: Demonstrating Maximum Hydrophobic Behavior of the coating.
Video 3: The coating's Extremely Hydrophobic properties, showing how water dries itself off the surface.
4. Manutenzione
4.1 Post-Application Curing
Allow the coating to cure for a minimum of 2 hours at 65°F (18°C) or higher before returning the vehicle to the customer or exposing it to moisture. For optimal durability and performance, allow the coating to cure for a full 24 hours at 65°F (18°C) or higher before washing the vehicle.
4.2 Cura generale
To maintain the longevity and performance of your Cerakote ceramic coating, regular washing with pH-neutral car wash soap is recommended. Avoid abrasive cleaners or harsh chemicals that could compromise the coating's integrity. The ultra-hydrophobic surface will make future cleaning significantly easier.
5. Risoluzione Dei Problemi
5.1 Problemi comuni
- Hazing or Streaks: If hazing or streaks appear after buffing, it may indicate that the coating was not fully leveled or removed. Re-buff the affected area with a clean, dry microfiber cloth. Ensure you are working in small, manageable sections and inspecting thoroughly.
- Applicazione non uniforme: If certain areas appear less glossy or hydrophobic, it may be due to uneven application. Ensure the applicator pad is thoroughly wet and apply using the cross-hatch method to achieve uniform coverage.
6. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | CERAKOTE |
| Tipo di finitura | Lucentezza |
| Volume dell'articolo | 30 Milliliters (per bottle) |
| Caratteristica speciale | UV & Chemical Resistant, Ultra-Hydrophobic |
| Usi specifici per il prodotto | Automobilistico |
| Raccomandazione di superficie | Metal, Car |
| Tempo di polimerizzazione completo | 24 ore |
| Numero modello articolo | AH-PROPAINTKIT |
7. Garanzia e supporto
For any questions, comments, or technical support regarding your Cerakote Professional Ceramic Coating, please contact us:
- Assistenza clienti: Numero di parte 1-866-774-7628
- E-mail: TECHNICALSUPPORT@CERAKOTE.COM
Cerakote is committed to providing high-performance products and excellent customer service. We are here to help you achieve the best possible results with your ceramic coating.