BSEED N020-120V-30A Surge Protector User Manual

1. Introduzione

The BSEED N020-120V-30A Surge Protector is a heavy-duty voltage regulator designed to protect your valuable home appliances from electrical fluctuations. It safeguards against high and low voltage, brownouts, spikes, instant surges, power failures, and load shedding. This device is suitable for a wide range of appliances, including refrigerators, air conditioners, TVs, computers, and other household electronics operating at 120V and up to 30A (3600W).

2. Istruzioni di sicurezza

Please read and understand all safety instructions before installing or operating this surge protector. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected appliances.

• Rischio elettrico: Ensure the power supply is disconnected before installation or making any adjustments.
• Cablaggio corretto: Always ensure the correct polarity of the cables (phase, neutral, grounding) during connection. Refer to the connection diagram for proper wiring.
• Capacità nominale: Do not exceed the maximum current capacity of 30 Amps or 3600 Watts. Overloading can cause damage and fire hazards.
• Solo per uso interno: This device is intended for indoor use in dry locations. Do not expose to water or excessive humidity.
• Connessioni sicure: Ensure all wire connections are tight and secure to prevent arcing or overheating.
• Installazione professionale: In caso di dubbi sulla procedura di installazione, consultare un elettricista qualificato.

3. Prodotto finitoview e Caratteristiche

3.1 Componenti e indicatori chiave

• Indicator of NORMAL voltage (Green): Si illumina quando il volumetage si trova all'interno dell'intervallo operativo sicuro.
• Indicator of OVER voltage (Orange): Illuminates when the input voltage exceeds the set maximum threshold.
• Indicator of LOW voltage (Red): Illuminates when the input voltage drops below the set minimum threshold.
• Vol. regolabiletage Impostazioni: Dials for setting minimum (Under Voltage Cut-off) and maximum (Over Voltage Cut-off) voltage soglie.
• Adjustable Reconnection Delay: Dial for setting the waiting time before power is reconnected after a voltage evento.

3.2 Funzionalità avanzate

1. Adjustable LOW voltage consentito: Selezionabile tra 90 V e 115 V.
2. Adjustable OVER voltage consentito: Selezionabile tra 125 V e 145 V.
3. Adjustable waiting cycle: Between 180-300 seconds (3 to 5 minutes).
4. Manual ON and OFF switch: For convenient control.
5. Assembly facilities: Two (2) options for mounting on a 2"x4" box or a flat surface.
6. Safer connectors: I terminali di ingresso e uscita sono protetti da una copertura.
7. Convenient access for gutters: Through predictable sections.
8. Protective cover with safety seal holes: To prevent unauthorized manipulation of adjustments and connections.

3.3 Dimensioni del prodotto

4. Installazione

4.1 Schema elettrico

Fare riferimento a Figure 2.1 (Connection Diagram) in the Safety Instructions section for detailed wiring instructions. Ensure all connections are made correctly, matching phase (L), neutral (N), and grounding (G) wires from your electric supply to the protector's input terminals, and then from the protector's output terminals to your appliance.

4.2 Montaggio

The surge protector can be mounted in two ways:

• On a 2"x4" electrical box: Use the designated assembly facilities on the device.
• Su una superficie piana: Secure the device using appropriate screws through the provided mounting holes.

4.3 Configurazione iniziale e regolazioni

Before connecting your appliance, you can adjust the voltage cut-off points and the delay time:

• Sotto il volumetage Interruzione: Use the 'MINIMUM V-' dial to set the lowest acceptable voltage tra 90V e 115V.
• oltre il volumetage Interruzione: Use the 'MAXIMUM V+' dial to set the highest acceptable voltage tra 125V e 145V.
• Reconnection Delay: Use the 'RECONNECTION S' dial to set the waiting period (3 to 5 minutes) before power is restored after a voltage evento.

It is recommended to set these values according to the specifications of the appliance you intend to protect and your local power grid stability.

5. Funzionamento

5.1 Accensione

After proper installation and adjustment:

1. Ensure the manual ON/OFF switch is in the 'ON' position.
2. Apply power to the surge protector.
3. The device will initiate a delay cycle (3 to 5 minutes, as set). During this time, the indicator lights may show a waiting state.
4. Once the delay period is complete and the voltage is stable within the set parameters, the green 'NORMAL' indicator light will turn on, and power will be supplied to your connected appliance.

5.2 Spie luminose

• Green Light (NORMAL): Indica che il volumetage is stable and within the safe operating range, and power is being supplied to the appliance.
• Orange Light (OVER VOLTAGE): Indicates that the input voltage is too high. The protector has cut off power to safeguard the appliance. Power will be restored after the voltage normalizes and the delay cycle completes.
• Red Light (LOW VOLTAGE): Indicates that the input voltage is too low. The protector has cut off power to safeguard the appliance. Power will be restored after the voltage normalizes and the delay cycle completes.

5.3 Applicazioni tipiche

6. Manutenzione

The BSEED N020-120V-30A Surge Protector requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Pulizia: Periodically wipe the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or solvents.
• Verifica della connessione: Annually inspect all wiring connections to ensure they remain tight and free from corrosion.
• Condizioni ambientali: Ensure the device is kept in a dry, well-ventilated area, away from direct sunlight, heat sources, and corrosive environments.
• Copertura protettiva: Keep the protective cover securely closed to prevent dust and unauthorized access to internal components.

7. Risoluzione Dei Problemi

If you encounter issues with your surge protector, refer to the following common problems and solutions:

8. Specifiche tecniche

9. Contatto e supporto

For further assistance, technical support, or warranty inquiries, please contact BSEED customer service through the retailer where the product was purchased or visit the official BSEED websito.

Produttore: SEME DI BOSCO