BoxWave DirectSync PD Cable (3ft) - USB-C to USB-C (100W) Instruction Manual

1. Introduzione e oltreview

The BoxWave DirectSync PD Cable is a versatile USB-C to USB-C cable designed for efficient power delivery and high-speed data transfer. This 3-foot (100cm) braided cable supports up to 100 Watts of Power Delivery (PD), making it suitable for charging a wide range of USB-C devices, including laptops, tablets, and smartphones. It also facilitates data synchronization at speeds up to 480Mbps.

Image 1.1: The BoxWave DirectSync PD Cable in Jet Black, coiled for storage.

Key features include a durable nylon braided exterior and reinforced rubberized grommet strain reliefs on both connectors, engineered to prevent fraying and ensure a reliable connection over time.

2. Impostazione

Setting up your DirectSync PD Cable is straightforward. No software installation or complex configuration is required.

1. Identificare le porte: Ensure your charging adapter and device both have USB-C ports.
2. Connetti alla fonte di alimentazione: Plug one end of the DirectSync PD Cable into a compatible USB-C power adapter or a USB-C port on a computer.
3. Connetti al dispositivo: Plug the other end of the cable into the USB-C port of your device (e.g., smartphone, tablet, laptop).

The cable is designed for immediate use upon connection.

3. Istruzioni per l'uso

3.1 Ricarica del dispositivo

To charge your device, connect the DirectSync PD Cable as described in the Setup section. The cable supports Power Delivery (PD) up to 100W, allowing for rapid charging of compatible devices. Charging will begin automatically once connected to a power source.

Image 3.1: The DirectSync PD Cable connected to a laptop for charging, demonstrating 100W Power Delivery capability.

3.2 Sincronizzazione dei dati

The DirectSync PD Cable enables high-speed data transfers up to 480Mbps while simultaneously charging your device. To sync data:

1. Connect one end of the cable to your device and the other end to a computer with a USB-C port.
2. Your device should appear as a connected storage device on your computer.
3. Follow your device's operating system instructions for transferring files.

Image 3.2: A smartphone connected to a laptop via the DirectSync PD Cable, illustrating simultaneous charging and data transfer.

4. Manutenzione

Proper care will extend the lifespan of your DirectSync PD Cable.

• Magazzinaggio: When not in use, coil the cable loosely. Avoid tight coiling or sharp bends, which can damage internal wires.
• Pulizia: Utilizzare un panno morbido e asciutto per pulire il cavo e i connettori. Non utilizzare prodotti chimici aggressivi o materiali abrasivi.
• Gestione: Always grasp the connector head when plugging or unplugging the cable. Avoid pulling directly on the cable itself to prevent strain on the connectors.
• Protezione: The nylon braided exterior and reinforced strain reliefs are designed for durability. However, avoid excessive force, crushing, or exposure to extreme temperatures.

Immagine 4.1: Un primo piano view of the durable nylon braided construction of the cable.

Image 4.2: Detail of the reinforced rubberized grommet strain relief, designed to prevent cable fraying at the connector.

5. Risoluzione Dei Problemi

If you encounter issues with your DirectSync PD Cable, try the following troubleshooting steps:

• Dispositivo non in carica:
  • Ensure both ends of the cable are securely plugged into the power source and your device.
  • Verify that the power adapter is functioning correctly and is plugged into a live outlet.
  • Try using a different USB-C port on your power adapter or device, if available.
  • Test the cable with another compatible device to determine if the issue is with the cable or the original device/power source.
• Ricarica lenta:
  • Confirm that your power adapter supports Power Delivery (PD) and provides sufficient wattage for your device (up to 100W for this cable).
  • Ensure your device also supports fast charging via USB-C PD.
  • Chiudere tutte le applicazioni ad alto consumo energetico in esecuzione sul dispositivo.
• Nessun trasferimento dati:
  • Ensure the cable is connected directly between your device and computer.
  • Check your device's settings to ensure it is configured to allow data transfer when connected via USB.
  • Try restarting both your device and computer.
  • Test with another USB-C port on your computer.

Se questi passaggi non risolvono il problema, consultare la sezione Garanzia e supporto per ulteriore assistenza.

6. Specifiche

7. Garanzia e supporto

For specific warranty information regarding your BoxWave DirectSync PD Cable, please refer to the documentation included with your purchase or visit the official BoxWave website. BoxWave is committed to providing quality products and customer satisfaction.

If you require technical support or have questions not covered in this manual, please contact BoxWave customer service through their official websito o le informazioni di contatto fornite al momento dell'acquisto.

Supporto online: www.boxwave.com