Manuale di istruzioni per FLIPSKY FT85BS V2.0 84V 60A ESC

1. Introduzione

This manual provides essential information for the proper installation, setup, and operation of your FLIPSKY FT85BS V2.0 84V 60A Electronic Speed Controller (ESC). Please read this manual thoroughly before use to ensure optimal performance and safety.

2. Informazioni sulla sicurezza

Always prioritize safety when working with high-voltage electronic components. Improper handling or installation can lead to serious injury or damage to equipment.

• Assicurarsi che tutti i collegamenti siano sicuri e isolati per evitare cortocircuiti.
• Verificare il volume della batteriatage and polarity before connecting to the ESC.
• Avoid touching exposed wires or terminals when the system is powered.
• Utilizzare in un'area ben ventilata per evitare il surriscaldamento.
• Refer to the manufacturer's guidelines for all connected components (motors, batteries, etc.).

3. Prodotto finitoview e Caratteristiche

The FLIPSKY FT85BS V2.0 ESC is a high-performance speed controller designed for various electric applications, including electric skateboards, ebikes, scooters, motorcycles, and robotics. It features robust construction with an aluminum case for efficient heat dissipation and advanced control capabilities.

Caratteristiche principali:

• PROCESSORE: AT32F403ARCT7 with ARM Cortex-M4 structure, 240MHz clock speed, max PWM switching frequency 45KHz.
• Modalità di controllo: Supports FOC (Field-Oriented Control) for low noise and smooth starting, and BLDC square wave mode.
• Programmabilità: Configurable via Flipsky ESC Tool and Flipsky VX4 remote (Firmware Version: VX4_V1.2).
• Dati in tempo reale: Supports real-time data monitoring and fault alerts.
• Adaptive Control: Adaptive variable PWM frequency control.
• Supporto sensore: Sensor mode (HALL) and sensorless mode (IPDS, HFPI).
• Funzioni di protezione: Basso/alto voltage, over-current, temperature abnormality, MOSFET over-temperature/over-current, battery over-discharge, motor over-temperature.

4. Specifiche

5. Configurazione e installazione

5.1 Disimballaggio

The FLIPSKY FT85BS V2.0 ESC package typically includes the following components:

• FLIPSKY FT85BS V2.0 ESC
• Cavo USB di tipo C.
• Various sensor and adapter wires (e.g., PH2.0-6Pin & ZH1.5-6Pin hall sensor wire adapter, PH2.0-5Pin adapter wire, GH1.25-4Pin wire without connector)
• Manuale di istruzioni

Collegamento a 5.2 fili

Carefully connect all necessary wires to the ESC. Refer to the wiring diagram and the following steps:

1. Connect the motor phase wires and Hall sensor wires to the corresponding ports on the ESC.
2. Connect the power switch button.
3. Connect the battery wire (ensure correct polarity).
4. Connect the remote receiver.
5. Connect any optional accessories such as brake lights, front lights, or horn wires.

For a visual guide on wire connections, please refer to the video below:

5.3 Parameter Settings via Flipsky ESC Tool

To configure the ESC parameters, connect it to a computer using the provided USB cable and the Flipsky ESC Tool software.

1. Connect the ESC to your computer via USB.
2. Accendere l'ESC.
3. Open the Flipsky ESC Tool software on your computer.
4. Click "Connect" to establish communication between the ESC and the tool.
5. In the "Motor Setup" tab, set the "Motor Rated Current(A)", "Li-ion Battery Series(S)", and "Cell Cut-Off Voltage" according to your motor and battery specifications.
6. Click the "Identification Button" and confirm to proceed with motor parameter identification.
7. Review the parameter identification results.
8. Navigate to the "Control Setup" tab.
9. Switch the "Input Signal Type" to UART (if using a compatible remote like FLIPSKY VX4).
10. Choose the "UART Control Mode" and "Extra Interface" options based on your needs (e.g., Current Gear Reverse Brake, Front/Brake Light, Horn).
11. Click "Write Setup" to save all configured parameters to the ESC.

For a visual guide on parameter settings, please refer to the video below:

5.4 Aggiornamento del firmware

Regularly updating the ESC firmware ensures optimal performance and access to the latest features. Firmware updates are supported via the Flipsky ESC Tool.

1. Connect the ESC to your computer and open the Flipsky ESC Tool.
2. Navigate to the "Firmware Update" tab.
3. Seguire le istruzioni visualizzate sullo schermo per scaricare e installare il firmware più recente.
4. Ensure the ESC remains powered and connected throughout the update process.

For a visual guide on firmware updates, please refer to the video below:

6. Istruzioni per l'uso

6.1 Accensione/spegnimento

The ESC is equipped with a power switch button. Press the button to power the unit on or off. If using a remote, ensure it is paired and configured correctly to control the ESC.

6.2 Speed Gear Levels

The ESC supports multiple speed gear levels: Low, Medium, High, and Reverse. These can typically be adjusted via the connected remote control or configured through the ESC Tool.

6.3 Frenata rigenerativa

The FT85BS V2.0 ESC supports regenerative braking, which converts kinetic energy back into electrical energy to recharge the battery during braking. This feature can be configured in the ESC Tool.

7. Manutenzione

• Regularly inspect all wiring and connections for wear or damage.
• Mantenere l'ESC pulito e privo di polvere, sporcizia e umidità.
• Ensure adequate airflow around the ESC for optimal cooling, especially during high-current operation.
• Evitare di esporre l'ESC a temperature estreme o alla luce solare diretta per periodi prolungati.

8. Risoluzione Dei Problemi

Se riscontri problemi con l'ESC, prendi in considerazione i seguenti passaggi comuni per la risoluzione dei problemi:

• Nessun potere: Check battery connections, power switch, and ensure the battery is charged.
• Il motore non gira: Verify motor phase and sensor wire connections. Re-run motor detection in the Flipsky ESC Tool. Check remote pairing and battery voltage.
• Comportamento irregolare: Ensure all parameters are correctly set in the Flipsky ESC Tool. Check for loose connections or interference.
• Surriscaldamento: Reduce load, improve ventilation, or check motor/battery current limits in the ESC Tool.
• Codici di errore: Refer to the Flipsky ESC Tool for specific error code diagnostics.

9. Garanzia e supporto

The FLIPSKY FT85BS V2.0 ESC comes with a 2-month warranty from the date of purchase. For technical support, warranty claims, or further assistance, please contact FLIPSKY customer service or visit their official websito.