Introduzione
The URAQT Nasal Washer Kit is designed for effective nasal irrigation, helping to relieve nasal congestion, allergies, and clean nasal passages. It is suitable for both adults and children (from 4 years old) and made from high-quality, BPA-free ABS material. This manual provides essential information for safe and proper use of your nasal washer kit.
Contenuto della confezione
- 1 x URAQT Nasal Washer Bottle (240ml capacity)
- 1 x Adult Nozzle
- 1 x Child Nozzle
- 40 x Neti Salt Packets (2.7g each)
Immagine: Oltreview of the URAQT Nasal Washer Kit components.
Informazioni sulla sicurezza
- Consult a healthcare professional before use if you have ear infections, recent ear surgery, or any other medical conditions.
- Use only distilled, sterile, or previously boiled and cooled water. Do not use tap water directly for nasal irrigation.
- Do not use if nasal passages are completely blocked or if you have an acute ear infection.
- Tenere fuori dalla portata dei bambini.
- Ensure the water temperature is close to body temperature (approximately 37°C / 98.6°F) to avoid discomfort.
Impostare
- Lavati le mani: Thoroughly wash your hands with soap and water before handling the kit.
- Componenti puliti: Ensure the nasal washer bottle and nozzles are clean and dry before first use and after each subsequent use.
- Preparare l'acqua: Use 300ml of distilled, sterile, or previously boiled and cooled water. The ideal temperature is around 37°C (98.6°F).
Image: Bottle features including clear volume marks and valve button.
Istruzioni per l'uso
Follow these steps for effective nasal irrigation:
- Add Saline: Pour one packet of URAQT Neti Salt into the 240ml nasal washer bottle.
- Aggiungere acqua: Fill the bottle with 300ml of warm water (approx. 37°C / 98.6°F).
- Dissolve Salt: Securely close the bottle with the cap and shake gently until the salt is completely dissolved.
- Collegare l'ugello: Select the appropriate nozzle (adult or child) and firmly attach it to the bottle. The wide caliber, four-hole nozzle is for adults, and the softer flow nozzle is for children.
- Posizionamento: Lean over a sink, tilt your head slightly to one side (e.g., left side for right nostril irrigation). Breathe through your mouth.
- Iniziare l'irrigazione: Gently insert the nozzle into the upper nostril. Press the valve button at the bottom of the bottle to start the flow of the solution. The solution will flow through the nasal passage and drain out of the lower nostril.
- Arresto del flusso: Release the button to stop the flow.
- Ripetere: Remove the nozzle, stand upright, and gently blow your nose to clear any remaining solution. Repeat the process for the other nostril.
Image: Step-by-step guide for preparing and using the nasal washer.
Image: Different nozzles for children and adults, showing flow patterns.
Manutenzione e pulizia
Proper cleaning ensures hygiene and extends the life of your nasal washer kit.
- Dopo ogni utilizzo: Disassemble the bottle and nozzles. Rinse all components thoroughly with clean, warm water.
- Essiccazione: Allow all parts to air dry completely before reassembling or storing. Place them on a clean towel or drying rack.
- Magazzinaggio: Store the clean and dry kit in a cool, dry place away from direct sunlight.
- Metodo di pulizia: Hand wash only. Do not use a dishwasher or harsh chemical cleaners.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| L'acqua non scorre | Valve button not fully pressed; Nozzle blocked. | Ensure the valve button is fully depressed. Check nozzle for any blockages and clean if necessary. |
| Disagio durante l'uso | Water temperature too hot or cold; Salt not fully dissolved; Incorrect head tilt. | Adjust water temperature to body temperature (approx. 37°C). Ensure salt is completely dissolved. Adjust head tilt for proper flow. |
| Solution leaking from mouth | Breathing through nose; Incorrect head position. | Breathe only through your mouth during irrigation. Adjust head tilt to allow solution to flow out the other nostril. |
Specifiche
- Numero modello: C-QX-240ML231211-FBA
- Marca: URAQT
- Materiale: Acrilonitrile Butadiene Stirene (ABS)
- Capacità: 240ml
- Dimensioni: Dimensioni: 19.7 x 8.9 x 5.9 cm
- Peso: 180 grammi
- Senza BPA: SÌ
- Fonte di energia: Manually powered
- Livello di resistenza all'acqua: Impermeabile
- Istruzioni per la cura: Hand wash with water
Garanzia e supporto
URAQT is committed to providing reliable products and excellent after-sales service. For any questions, concerns, or support regarding your Nasal Washer Kit, please contact URAQT customer service through your purchase platform or the official URAQT websito.