Hoteel 10x20

HOTEEL 10x20 Pop Up Canopy Tent Instruction Manual

Model: 10x20 (Upgraded) | Brand: Hoteel

Linee guida di sicurezza

Important safety information for the HOTEEL 10x20 Pop Up Canopy Tent. Please read carefully before assembly and use.

  • This portable freestanding shelter is designed for daily outdoor sun and rain protection.
  • It must be taken down in high winds (level 4 or higher) to avoid unnecessary damage.
  • Always use the included sandbags, stakes, and ropes to secure the shelter.
  • Ensure the shelter is properly anchored before use.

WARNING: Do not use in severe weather conditions, including heavy rain, strong winds, or snow. Failure to follow these instructions may result in injury or damage to the product.

Lista imballaggio

Verificare che tutti i componenti siano presenti prima del montaggio.

ArticoloQuantità
Commercial Pop-up Canopy Frame1
Copertura superiore del baldacchino1
PU Coated Panels (Sidewalls with Window)4
PU Coated Panels (Sidewalls with Zipper)2
420D Oxford Cloth PVC Coated Sandbags4
picchetti di terra12
Corde eoliche6
Borsa con ruote1
Manuale d'uso1
All components included in the HOTEEL 10x20 Pop Up Canopy Tent package

Image description: A visual representation of all included components: canopy frame, top cover, sidewalls (4 with windows, 2 with zippers), sandbags, ground pegs, wind ropes, wheeled bag, and user manual.

Istruzioni di installazione

This canopy requires 2-3 people for quick and safe installation. No tools are required.

Passaggio 1: disimballare e preparare

Carefully remove all components from the wheeled bag. Lay out the frame and fabric on a clean, flat surface.

Video description: This video demonstrates the unboxing of the canopy tent and the initial steps of setting up the frame. It shows how to identify different parts and begin the assembly process.

Passaggio 2: espandere la cornice

With two people, stand on opposite sides of the frame. Lift and partially pull the canopy frame apart until it is about halfway open.

Step 1 and 2 of HOTEEL canopy setup, showing frame expansion

Image description: A composite image illustrating Step 1 (pulling the frame to half-open) and Step 2 (attaching the top and locking the frame) of the easy-up canopy setup.

Fase 3: Fissare la parte superiore del baldacchino

Unfold the canopy top cover and place it over the partially opened frame. Secure the canopy top to the frame using the Velcro connections at each corner and along the edges.

Close-up of the central lock design for easy canopy setup

Descrizione dell'immagine: Un primo piano view of the central lock design, highlighting the mechanism for securing the canopy top to the frame.

Fase 4: Estendi le gambe e regola l'altezza

With the canopy top secured, fully extend the legs of the frame. Press the red thumb button on each leg to adjust the canopy to one of three available heights (98", 102", 106"). Ensure all legs are locked at the desired height.

Illustration of the HOTEEL canopy tent showing three adjustable height positions

Image description: An illustration showing the three adjustable height positions of the canopy legs, ranging from 98 to 106 inches.

Step 5: Attach Sidewalls (Optional)

If desired, attach the sidewalls using the hook and loop fasteners and zippers. The sidewalls can be configured with windows or solid panels.

HOTEEL canopy tent with six removable sidewalls featuring church window designs

Image description: The canopy tent shown with all six removable sidewalls attached, featuring elegant church window designs.

Fase 6: Fissare la tettoia

For added stability, especially in windy conditions, use the provided sandbags, ground pegs, and wind ropes. Fill the sandbags with sand or gravel and attach them to the canopy legs. Insert ground pegs into the feet of each canopy leg and tie the wind ropes to the canopy corners, securing them to the ground with additional pegs.

Video description: This video demonstrates the proper method for installing the 8 wind-resistant rods to enhance the canopy's stability, along with securing it using ropes and stakes.

Istruzioni per l'uso

The HOTEEL 10x20 Pop Up Canopy Tent is designed for various outdoor activities, parties, and commercial use.

Regolazione dell'altezza

To adjust the height, press the red thumb button on each leg and carefully raise or lower the leg to the desired position. Ensure the button clicks into place to lock the height.

Sidewall Configuration

The six removable sidewalls offer flexibility. Use all for maximum enclosure, some for partial coverage, or none for an open canopy. The zippered sidewalls allow for easy entry and exit.

Considerazioni meteorologiche

This canopy provides UPF 50+ UV protection and is 100% waterproof. However, it is crucial to take down the canopy in high winds (level 4 or higher) and storms to prevent damage.

Video description: This video demonstrates the canopy's waterproof capabilities and highlights the night reflective strips for enhanced visibility and safety.

Manutenzione

Pulizia

Clean the canopy fabric with mild soap and water. Do not use harsh chemicals or abrasive cleaners. Allow the fabric to air dry completely before storage to prevent mildew.

Cura del telaio

Inspect the alloy steel frame periodically for any signs of damage or wear. Ensure all connections are secure.

Magazzinaggio

When not in use, disassemble the canopy and store all components in the provided wheeled bag in a dry, cool place, away from direct sunlight.

Risoluzione dei problemi

Difficulty Expanding/Collapsing Frame

  • Ensure all locking mechanisms are disengaged before attempting to expand or collapse the frame.
  • Apply even pressure from both sides when expanding.
  • Lubricate moving parts if they are stiff.

Canopy Not Stable

  • Verify all legs are locked at the same height.
  • Ensure sandbags are filled and properly attached.
  • Use all provided ground pegs and wind ropes to anchor the canopy securely.
  • Do not use in windy conditions exceeding Level 4.

Perdita d'acqua

  • Check that the canopy top is correctly installed and stretched taut over the frame.
  • Ensure all seams are properly sealed. The fabric is designed to be 100% waterproof.

Specifiche del prodotto

  • Marca: Hoteel
  • Modello: 10x20 (Upgraded)
  • Materiale: 420D Oxford with two layers of PU coating (Canopy), Alloy Steel (Frame)
  • Colore: Blu scuro
  • Peso dell'articolo: 77 libbre
  • Dimensioni (L x P x A): 240 cm L x 120 cm P x 106.3 cm A
  • Superficie: 200 piedi quadrati
  • Protezione UV: UPF50+
  • Livello di resistenza all'acqua: Waterproof (2.1psi pressure)
  • Tipo di chiusura: Zipper (for sidewalls)
  • Assemblaggio richiesto:

Garanzia e assistenza clienti

Hoteel provides a comprehensive warranty covering the canopy top and frame.

For any missing components or product concerns, please contact Hoteel's professional team directly. They aim to respond within 24 hours and assist with prompt solutions.

Visit the Hoteel Store on Amazon per maggiori informazioni e supporto.

© 2026 Hoteel. All rights reserved.