Introduzione
Thank you for choosing the PHYSEN Wireless Doorbell Kit. This manual provides detailed instructions for setting up, operating, and maintaining your new doorbell system. This kit includes one wireless doorbell button (transmitter) and three plug-in smart doorbell receivers, designed for convenience and reliability in homes, offices, classrooms, and more.
Figure 1: PHYSEN Wireless Doorbell Kit components.
Caratteristiche del prodotto
- Lunga portata wireless: Extends over 1300ft (400m) in open space, ensuring you never miss a chime.
- Pulsante impermeabile: IP55 rated, truly waterproof and weatherproof, operating from -4°F to 140°F.
- Installazione semplice: No tools needed for basic setup. Can be installed via double-sided tape or screws.
- 58 suonerie: A wide selection of chimes to suit various preferences.
- 5 livelli di volume: Adjustable volume from 0 dB (mute) to 110 dB.
- Indicatore flash LED: Visual alert suitable for the elderly and hearing impaired.
- Funzione di memoria: Remembers your last melody and volume level after closing.
- Expandable and Multi-Use: System can be expanded with additional PHYSEN plug-in receivers or push buttons.
Figure 2: Key features of the PHYSEN Wireless Doorbell.
Figure 3: Customize individual transmitters for different doors.
Figure 4: The doorbell button is IP55 waterproof and weatherproof.
Figure 5: Ultra-long wireless range for extensive coverage.
Figure 6: Loud enough sound and LED flash for clear alerts.
Figure 7: Choose from 58 chimes, including a mute mode for quiet environments.
Figure 8: The doorbell system is suitable for various environments.
Contenuto della confezione
Your PHYSEN Wireless Doorbell Kit includes the following items:
- 1 x trasmettitore campanello wireless (pulsante)
- 3 x Plug-in Smart Doorbell Receivers
- 1 x Double-sided Mounting Tape
- 2 ancore
- 2 x Viti
- 1 x A23 Battery (pre-installed in transmitter)
Impostare
1. Initial Setup of Doorbell Button (Transmitter)
- The A23 battery is pre-installed in the transmitter. Before first use, gently pull out the plastic insulation tab from the battery compartment.
- Press the doorbell button. The blue LED ring should light up, indicating it's ready for use.
2. Installing the Doorbell Button
You have two options for mounting the doorbell button:
Figure 9: Easy installation methods for the doorbell button.
- Method 1: Double-sided Tape (Recommended for quick setup)
- Pulire accuratamente la superficie di montaggio desiderata per assicurarsi che sia priva di polvere e umidità.
- Peel off one side of the protective film from the double-sided tape and firmly attach it to the back of the doorbell button.
- Peel off the other side of the protective film and press the doorbell button firmly onto the wall or door frame for at least 30 seconds.
- Method 2: Screws and Wall Plugs (Recommended for permanent installation)
- Open the back cover of the doorbell button.
- Segnare le posizioni dei fori sulla parete utilizzando il coperchio posteriore come modello.
- Drill the holes, insert the wall plugs, and then secure the back cover with the provided screws.
- Snap the doorbell button onto the secured back cover.
3. Plugging in the Receivers
Plug the three smart doorbell receivers into standard electrical outlets in desired locations throughout your home, office, or classroom. Ensure they are within the 1300ft wireless range of the doorbell button.
4. Pairing the Doorbell Kit
Your doorbell button and receivers are pre-paired from the factory. If you need to re-pair or add new components, follow these steps:
How to Pair the Doorbell Kits:
Video: Instructions on how to pair the doorbell button with the receivers.
- Plug in the receiver you wish to pair.
- Press and hold the "Volume" button and "Down" button on the receiver simultaneously until you hear a "Ding" sound. This indicates the receiver is in pairing mode.
- Immediately press the doorbell button (transmitter). The receiver will ring, confirming successful pairing.
How to Add More Receivers:
Video: Instructions on how to add additional receivers to your doorbell system.
Follow the same pairing steps as above for each additional receiver you wish to add.
How to Add More Push Buttons:
Video: Instructions on how to add additional push buttons to your doorbell system.
To pair an additional push button to an existing receiver, put the receiver into pairing mode (as described above), then press the new push button. The receiver will ring, confirming successful pairing.
Istruzioni per l'uso
1. Cambiare le suonerie
The receiver offers 58 different melodies. To change the ringtone:
Video: Instructions on how to choose your favorite ringtone.
- On the side of the receiver, locate the "Up" and "Down" buttons.
- Press the "Up" or "Down" button to cycle through the available ringtones. The receiver will play each melody as you press the button.
- Once you find your preferred ringtone, press the doorbell button (transmitter) to save the selection. The receiver will play the chosen ringtone, confirming it has been saved.
2. Regolazione dei livelli di volume
The receiver has 5 adjustable volume levels, from 0 dB (mute) to 110 dB.
- Locate the "Volume" button on the side of the receiver.
- Press the "Volume" button repeatedly to cycle through the 5 volume levels. Each press will change the volume and play a sample sound at that level.
- To activate mute mode (0 dB), continue pressing the volume button until the sound is off. The LED flash will still activate when the doorbell is pressed.
Manutenzione
1. Changing the Transmitter Battery
The doorbell transmitter uses an A23 battery. When the LED indicator on the button no longer lights up or the range decreases significantly, it's time to replace the battery.
Video: Instructions on how to change the battery in the doorbell button.
- Using a small screwdriver (or similar tool), gently pry open the back cover of the doorbell button.
- Rimuovere la vecchia batteria A23.
- Insert a new A23 battery, ensuring the positive (+) and negative (-) terminals are correctly aligned.
- Fissare saldamente la cover posteriore in posizione.
2. Pulizia
Pulire il pulsante e i ricevitori del campanello con un panno morbido e asciutto. Non utilizzare detergenti abrasivi o solventi.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Doorbell doesn't ring. | Battery in transmitter is dead or insulation tab not removed. Il ricevitore è scollegato o non è alimentato. Non accoppiato. | Remove insulation tab or replace battery. Assicurarsi che il ricevitore sia collegato e alimentato. Riassociare il trasmettitore e il ricevitore (vedere la sezione Configurazione). |
| Portata wireless ridotta. | Ostruzioni (muri spessi, strutture metalliche). Batteria scarica nel trasmettitore. | Riposizionare il ricevitore o il trasmettitore per ridurre al minimo gli ostacoli. Sostituire la batteria del trasmettitore. |
| Receiver rings unexpectedly. | Interferenze da altri dispositivi wireless. Accidental pairing. | Reset the doorbell system (see below) and re-pair only your desired components. |
| Cannot change ringtone/volume. | Utilizzo errato dei pulsanti. | Refer to "Operating Instructions" for correct button functions. |
Resetting the Doorbell System
If you experience persistent issues or wish to clear all pairings, you can reset the receiver:
Video: Instructions on how to reset the doorbell receiver.
- Long press the "Down" button on the receiver for 7-10 seconds until you hear a "Ding" sound.
- After the reset, the doorbell button will no longer trigger the receiver. You will need to re-pair all desired transmitters and receivers following the steps in the "Setup" section.
Specifiche
| Attributo | Valore |
|---|---|
| Produttore | FISEN |
| Numero di parte | Y1-1T3-B-US |
| Peso dell'articolo | 10.9 once |
| Dimensioni del prodotto | 7.6 x 3.6 x 3.4 pollici |
| Misurare | 1 Button + 3 Receivers |
| Colore | Nero |
| Materiale | addominali |
| Fonte di alimentazione | Alimentazione CA/batteria |
| Metodo di installazione | Autoadesivo o avvitabile |
| Tipo di connessione accessoria | Senza fili |
| Caratteristiche speciali | Adjustable 58 Tones and 5 Volume Levels (Mute Mode included); LED flashing for the elderly and hearing impaired; waterproof |
| Componenti inclusi | 1 wireless doorbell transmitter and 3 plug-in smart doorbell receivers, double sided mounting tape, anchors, screws and A23 battery included. |
| Batterie incluse? | SÌ |
| Tipo di cella della batteria | Alcalino |
Garanzia e supporto
PHYSEN products are designed for durability and performance. For specific warranty information and technical support, please refer to the contact details provided on the product packaging or visit the official PHYSEN webluogo. Conserva la ricevuta di acquisto per eventuali richieste di garanzia.
Per ulteriore assistenza, puoi anche contattare direttamente il venditore tramite la piattaforma su cui hai acquistato il prodotto.