PAL 120W Multi Color Dual Zone Remote Control Transformer Instruction Manual

1. Introduzione

This manual provides comprehensive instructions for the installation, operation, and maintenance of the PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120). This device is engineered to power and control multi-color LED lighting systems, offering advanced dual-zone functionality for versatile and dynamic lighting solutions in various applications.

2. Informazioni sulla sicurezza

ATTENZIONE: la mancata osservanza di queste istruzioni di sicurezza potrebbe causare incendi, scosse elettriche, lesioni o danni al prodotto o alla proprietà.

• Always disconnect power at the circuit breaker before installing, servicing, or performing any maintenance on the transformer or connected lighting.
• L'installazione deve essere eseguita da un elettricista qualificato e in conformità con tutti i codici elettrici locali e nazionali.
• Do not operate the transformer if it has been damaged in any way.
• Ensure the transformer is installed in a location that is protected from direct water exposure, although the unit is rated IP65 for dust and water jet protection.
• Verificare che il volume di fornituratage matches the transformer's specified input voltage (100-240V AC, 50/60Hz).
• Do not exceed the maximum output power of 120 Watts.

3. Contenuto della confezione

Please verify that all items listed below are present and undamaged in your package:

• 1 x PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120)
• 1 x PAL PCZ-2 Color Touch 2 Zone Remote Control
• 2 batterie AAA (per il telecomando)

Image: The PAL 120W Multi Color Dual Zone Remote Control Transformer, its accompanying PCZ-2 remote control, and two AAA batteries. The transformer is a dark grey rectangular unit with connection ports on one side, and the remote is shown in its packaging next to it.

4. Prodotto finitoview

4.1. Transformer Unit (64-PCR-3D-120)

The main transformer unit is a robust, weather-resistant enclosure designed for outdoor or indoor installation. It converts standard AC line voltage to 24V DC, suitable for PAL LED lighting products. Key features include:

• Ingresso volumetage: 100-240 V CA, 50/60 Hz
• Alimentazione: 125 Watt
• Potenza di uscita: 120 Watts (24V DC)
• Grado di protezione IP: IP65 (a tenuta di polvere e protetto contro i getti d'acqua)
• Certificazioni: CE, SELV

4.2. PCZ-2 Color Touch 2 Zone Remote Control

The PCZ-2 remote control allows for intuitive management of your connected LED lighting. It features a color touch wheel for precise color selection and dedicated buttons for controlling two independent lighting zones, brightness, and various lighting modes.

5. Configurazione e installazione

Before beginning installation, ensure all power is disconnected at the main circuit breaker.

1. Montaggio: Select a suitable, secure location for the transformer. Mount the unit vertically using appropriate fasteners, ensuring adequate ventilation around the enclosure.
2. Cablaggio di ingresso: Connect the AC input power (100-240V AC) to the designated input terminals on the transformer. Ensure proper polarity (Live, Neutral, Ground) as indicated on the unit. Use appropriate gauge wiring for the power requirements.
3. Cablaggio di uscita: Connect your 24V DC PAL LED lighting fixtures to the output terminals. The transformer supports two independent zones. Ensure correct polarity (+ and -) for each lighting fixture. Refer to your lighting fixture's manual for specific wiring diagrams.
4. Batterie del telecomando: Open the battery compartment on the PCZ-2 remote control and insert the two AAA batteries, observing the correct polarity.
5. Accensione: Una volta che tutti i collegamenti sono sicuri e verificati, ripristinare l'alimentazione all'interruttore automatico.

6. Istruzioni per l'uso

6.1. Associazione del telecomando

The PCZ-2 remote control should be pre-paired with the transformer. If pairing is lost or a new remote is introduced:

1. Ensure the transformer is powered on.
2. Within 5 seconds of powering on the transformer, press and hold the 'Zone 1 ON' button on the remote control for approximately 3 seconds. The connected lights should flash to confirm successful pairing.
3. Repeat for 'Zone 2 ON' button if you wish to pair the second zone.

6.2. Basic Remote Functions

• Accensione/spegnimento: Press the 'ON' or 'OFF' buttons for each zone to toggle power.
• Selezione del colore: Use the color touch wheel to select desired static colors.
• Controllo della luminosità: Use the brightness up/down buttons to adjust the intensity of the selected color or mode.
• Selezione della modalità: Cycle through pre-programmed lighting modes (e.g., color changing, fading) using the 'Mode' button.
• Controllo di zona: Independently control Zone 1 and Zone 2 using their respective buttons.

7. Manutenzione

• Pulizia: Periodically clean the exterior of the transformer and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ispezione: Regularly inspect wiring connections for any signs of wear, corrosion, or damage. Ensure all connections remain secure.
• Sostituzione della batteria: Sostituire le batterie AAA del telecomando quando le sue prestazioni diminuiscono o smette di rispondere.

8. Risoluzione Dei Problemi

9. Specifiche

10. Garanzia e supporto

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official PAL Lighting website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact PAL Lighting customer service directly. Contact information can typically be found on the manufacturer's websito o confezione del prodotto.