Manuale di istruzioni per l'illuminazione sottopensile ricaricabile con sensore di movimento MCGOR da 10 pollici

1. Introduzione

Thank you for choosing the MCGOR 10-inch Rechargeable Motion Sensor Under Cabinet Lighting. This product is designed to provide convenient, energy-efficient illumination for various indoor spaces such as kitchens, closets, stairs, and hallways. Featuring a motion sensor, dimmable brightness, and easy magnetic installation, these lights enhance visibility and safety.

Image 1.1: MCGOR 10-inch Under Cabinet Lights (2-Pack)

2. Contenuto della confezione

Si prega di verificare che tutti gli articoli elencati di seguito siano inclusi nel pacchetto:

• 2 x MCGOR 10-inch Cabinet Lights
• 2 cavi di ricarica USB-C
• 6 x piastre di ferro adesive
• 6 x Viti
• 1 x Manuale di istruzioni

3. Caratteristiche del prodotto

• Modalità sensore di movimento: Automatically activates when motion is detected within 120° and 10 feet in low-light conditions, turning off after approximately 20 seconds of no motion.
• Luminosità dimmerabile: Features 5 levels of brightness adjustment to suit various lighting needs, from task lighting to a subtle night light.
• Modalità sempre attiva: Allows the light to remain continuously on for extended use, suitable for reading or as a flashlight.
• Batteria ricaricabile: Equipped with a built-in 1800mAh rechargeable battery, easily charged via USB-C. Eliminates the need for frequent battery replacement.
• Installazione semplice: Integrated strong magnets allow direct attachment to iron surfaces. For non-metallic surfaces, use the included adhesive metal plates or screws.

Image 3.1: Feature Comparison

4. Configurazione e installazione

The MCGOR under cabinet lights offer two primary installation methods:

4.1 Magnetic Attachment (for Metal Surfaces)

1. Ensure the metal surface is clean and dry.
2. Simply place the light directly onto the ironwork surface. The built-in magnets will secure it in place.

4.2 Adhesive Metal Plates (for Non-Metallic Surfaces)

1. Pulire e asciugare accuratamente la superficie di installazione desiderata.
2. Peel the protective film from one side of an adhesive iron plate.
3. Stick the adhesive iron plate firmly onto the chosen surface. Apply pressure for 30 seconds to ensure strong adhesion.
4. Allow 24 hours for the adhesive to fully cure before attaching the light.
5. Once the plate is secure, the light can be magnetically attached to the plate.

4.3 Screw Installation (Optional)

For a more permanent installation or on surfaces where adhesive may not hold well (e.g., rough wood, humid environments), use the provided screws to attach the metal plates. The lights can then be magnetically attached to these screwed-in plates.

Image 4.1: Two Installation Methods

5. Istruzioni per l'uso

The light features a slide switch and a brightness adjustment button.

Image 5.1: Light Controls Overview

5.1 Selezione della modalità

Use the slide switch to select one of three modes:

• SOPRA: La luce rimarrà accesa ininterrottamente.
• OFF: La luce sarà spenta.
• AUTO: Activates motion sensor mode. The light will turn on automatically when motion is detected in a dark or low-light environment and turn off after approximately 20 seconds of no motion.

Image 5.2: Motion Sensor and Always-On Modes

5.2 Regolazione della luminosità

In either ON or AUTO mode, press and hold the brightness adjustment button (located next to the PIR sensor) to cycle through 5 levels of brightness. Release the button when the desired brightness is reached.

Image 5.3: 5 Levels of Brightness

6. Ricarica

The MCGOR under cabinet light is equipped with a rechargeable 1800mAh battery.

• Porta di ricarica: Individuare la porta di ricarica USB-C sul lato della luce.
• Connessione: Connect the provided USB-C charging cord to the light and plug the other end into a standard USB power adapter (not included) or a computer USB port.
• Indicatore di carica: The PIR sensor/charging indicator light will illuminate red during charging and turn green when fully charged.
• Durata della batteria: A full charge can last approximately 7-45 days in Motion Sensor Mode (depending on usage frequency) or 8 hours in Always-On Mode at 100% brightness.

Image 6.1: USB-C Charging

7. Manutenzione

To ensure optimal performance and longevity of your MCGOR under cabinet light:

• Pulizia: Wipe the light gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Esposizione all'acqua: Questo prodotto non è resistente all'acqua. Evitare l'esposizione all'acqua o a umidità elevata.
• Cura della batteria: Ricaricare regolarmente la batteria, anche se non la si usa frequentemente, per mantenerla in buone condizioni. Evitare di scaricarla completamente per periodi prolungati.

8. Risoluzione Dei Problemi

9. Specifiche

10. Informazioni sulla sicurezza

• Non smontare o modificare il prodotto.
• Tenere lontano dall'acqua e da ambienti ad alta umidità.
• Non esporre alla luce solare diretta o ad alte temperature.
• Tenere fuori dalla portata dei bambini.
• Per la ricarica utilizzare solo il cavo USB-C in dotazione.
• Evitare di guardare direttamente la sorgente luminosa a LED per periodi prolungati.

11. Garanzia e supporto

For warranty information or technical support, please refer to the product packaging or contact MCGOR customer service directly. Contact details are typically available on the manufacturer's official websito o tramite la tua piattaforma di acquisto.