Pissente Pissentekubhgwgwzoe7-01

Pissente Programmable Digital LCD Timer Relay Switch (12V)

Manuale di istruzioni

1. Introduzione

This manual provides comprehensive instructions for the Pissente Programmable Digital LCD Timer Relay Switch. This device is designed for precise control of electrical appliances, offering daily and weekly programming capabilities with up to 16 ON/OFF settings. It features a real-time LCD display and is suitable for DIN rail installation.

Pissente Digital LCD Timer Relay Switch, angled view

Immagine 1: Angolata view of the Pissente Digital LCD Timer Relay Switch. This image shows the overall design of the timer, including its DIN rail mounting clips and terminal connections.

2. Componenti del prodotto

The timer features an LCD display for time and program status, along with several control buttons for setup and programming.

  • Schermo LCD: Shows current time, day, and ON/AUTO/OFF status.
  • Pulsanti di controllo: Used for setting time, programs, and manual control. These include P (Program), D+ (Day), H+ (Hour), M+ (Minute), C/R (Cancel/Recall/Reset), and the Tempo pulsante.
  • terminali: Connections for power input (L, N) and load output (1, 2, 3, 4, 5 for NO/NC contacts).
  • Montaggio su guida DIN: Integrated clips for easy installation on a standard DIN rail.
Close-up of Pissente Digital LCD Timer buttons and display

Immagine 2: Primo piano view of the timer's LCD display and control buttons. This image highlights the 'P', 'D+', 'H+', 'M+', 'RESET', and 'MANUAL C/R' buttons, along with the digital time display.

3. Specifiche

ParametroValore
Ingresso volumetageAC/DC 12V (for this variant)
Attuale15A
Consumo energetico4.5 VA (massimo)
Switching Capacity (Resistive)16A @ 250VAC
Impostazioni ON/OFF16 ON and 16 OFF (daily/weekly)
Intervallo di tempoDa 1 minuto a 168 ore
Intervallo minimo1 minuto
DisplayLCD
Errore di tempo≤2 seconds/day (at 25℃)
Batteria di backup1.2V 40mAh NiMH (built-in), ≥15 days
Metodo di montaggioGuida DIN
Temperatura di esercizio-10℃ a 55℃
Umidità di esercizio35-85% UR
Dimensioni (L x P x A)3.93 x 3.14 x 2.75 pollici (circa 100 x 80 x 70 mm)
Peso4.8 once (circa 136 g)

4. Installazione

4.1 Montaggio su guida DIN

The timer is designed for easy installation on a standard 35mm DIN rail. Simply clip the device onto the rail until it locks securely.

4.2 Schema elettrico

Connect the timer according to the diagram below. Ensure all connections are secure and comply with local electrical codes. The input voltage for this specific timer is 12V AC/DC.

Wiring diagram for Pissente Digital LCD Timer

Immagine 3: posteriore view of the timer showing the wiring diagram. Terminals L and N are for power input (12V AC/DC). Terminals 1 and 2 are for the load input. Terminals 3, 4, and 5 are for the relay output (3: Common, 4: Normally Open (NO), 5: Normally Closed (NC)).

  • L,N: Power input terminals (12V AC/DC).
  • 1, 2: Load input terminals (connect to the device you want to control).
  • 3: Common terminal for the relay output.
  • 4: Normally Open (NO) contact. The circuit is closed when the timer is ON.
  • 5: Normally Closed (NC) contact. The circuit is closed when the timer is OFF.

5. Configurazione iniziale

5.1 First-Time Use and Reset

  1. When using the timer for the first time, connect it to the 12V AC/DC power supply to charge the internal battery.
  2. Premere il tasto C/R (Reset) button located on the front panel. This will clear all settings and reset the timer to its default state.

5.2 Setting Time Format (12/24-Hour Mode)

The timer defaults to 24-hour mode.

  • To switch to 12-hour mode: Press and hold the Tempo button (bottom left, next to Reset) for approximately 5 seconds until 'AM' or 'PM' appears on the display.
  • To switch back to 24-hour mode: Press and hold the Tempo nuovamente il pulsante per 5 secondi.

5.3 Impostazione dell'ora e del giorno correnti

  1. Premere il tasto Tempo button once. The clock icon will appear.
  2. Premere D+ per impostare il giorno corrente della settimana.
  3. Premere H+ per impostare l'ora corrente.
  4. Premere M+ per impostare il minuto corrente.
  5. Premere il tasto Tempo nuovamente il pulsante per salvare e uscire.

6. Istruzioni di programmazione

The timer allows for up to 16 ON/OFF programs. Follow these steps to set your desired schedules.

  1. Premere il tasto P button. The display will show '1 ON'. This indicates you are setting the first ON time.
  2. Premere D+ to select the days of the week for this program. You can choose individual days, weekdays, weekends, or all days. If you want the same setting for every day, you do not need to press this button.
  3. Premere H+ to set the desired hour for the ON time.
  4. Premere M+ to set the desired minute for the ON time.
  5. Premere il tasto P button again. The display will show '1 OFF'. This indicates you are setting the first OFF time.
  6. Premere D+ to select the days of the week for this OFF program (usually the same as the ON program).
  7. Premere H+ to set the desired hour for the OFF time.
  8. Premere M+ to set the desired minute for the OFF time.
  9. Repeat steps 1-8 to set additional ON/OFF programs (up to 16 pairs).
  10. Dopo aver impostato tutti i programmi desiderati, premere il tasto Tempo pulsante per salvare e uscire dalla modalità di programmazione.
Pissente Digital LCD Timer with cover open

Immagine 4: Angolata view of the timer with its protective cover open, revealing the control buttons. This view is useful when interacting with the buttons for programming.

7. Controllo manuale

The timer allows for manual override of programmed settings. The MANUALE C/R button cycles through different modes:

  • SOPRA: The output is continuously ON, overriding any OFF programs.
  • AUTO: Il timer funziona in base agli orari di accensione/spegnimento programmati.
  • OFF: The output is continuously OFF, overriding any ON programs.

Premere il tasto MANUALE C/R button repeatedly to cycle through these modes (ON > AUTO ON > OFF > AUTO OFF). The display will indicate the current manual status.

8. Unlock Instructions

To prevent accidental changes, the timer automatically locks the buttons if no operation is performed for 15 seconds. To unlock the buttons:

  • Premere il tasto C/R button four times in quick succession. The 'lock' icon (often represented by a small 'a' in the lower left corner of the display) will disappear, indicating the buttons are unlocked and ready for operation.
  • After completing your settings, the timer will automatically re-lock after 15 seconds of inactivity. You can also manually re-lock by pressing the C/R button four times again.

9. Manutenzione

The Pissente Digital LCD Timer Relay Switch requires minimal maintenance. Keep the device clean and free from dust. Do not expose it to extreme temperatures or humidity outside of the specified operating conditions. No user-serviceable parts are inside.

10. Risoluzione Dei Problemi

  • Il display è vuoto: Ensure the timer is connected to a 12V AC/DC power supply. If it's a new installation, allow time for the internal battery to charge. Press the C/R Pulsante (Reset).
  • Il timer non risponde alla pressione dei pulsanti: The buttons may be locked. Press the C/R button four times to unlock.
  • Programs not activating: Check if the timer is in 'AUTO' mode using the MANUALE C/R button. Verify that the current time and day are set correctly. Review i tempi di accensione/spegnimento programmati per la precisione.
  • Output always ON/OFF: Check the manual control setting using the MANUALE C/R button. Ensure it is set to 'AUTO'.
  • Visualizzazione dell'ora errata: Reset the current time and day as described in Section 5.3.

11. Informazioni di supporto

For further assistance or inquiries regarding your Pissente Programmable Digital LCD Timer Relay Switch, please refer to the product's original packaging or contact the retailer where the product was purchased. Keep your purchase receipt and model number (Pissentekubhgwzoe7-01) handy for support.