Vtopek H11 Solar TPMS: 3.5-inch Wireless Tire Pressure Monitoring System User Manual

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your Vtopek H11 Solar Tire Pressure Monitoring System (TPMS). This system is designed to monitor tire pressure and temperature in real-time, enhancing driving safety for both 2-wheel (trailer) and 4-wheel (car, SUV, van) vehicles.

2. Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:

• TPMS Monitor x 1
• External Sensors x 4
• Removable Bracket x 1
• Hex Nuts x 4
• Chiave x 1
• Cavo di ricarica di tipo C x 1
• Adesivi x 2
• Manuale utente x 1

Figura 2.1: Contenuto della confezione

3. Caratteristiche principali

• Supporto doppia modalità: Compatible with both 2-wheel (trailer) and 4-wheel (car, SUV, van) vehicles.
• Monitoraggio ad alta precisione: Provides tire pressure readings with 0.01 bar accuracy.
• Separate Alarm Settings: Allows independent high/low pressure alarm value settings for front and rear tires.
• Detachable Monitor: The monitor can be easily detached from its bracket for flexible placement, charging, and settings adjustment.
• Retroilluminazione automatica: 3-level adjustable backlight for clear visibility in various lighting conditions (daytime, indoor, night).
• Real-time Alarms: Six alarm modes including rapid air leak, high/low pressure, high temperature, sensor data loss, and low battery.
• Sospensione/Riattivazione automatica: Features vibration detection for automatic power on/off, conserving battery.
• Opzioni di doppia ricarica: Supports solar charging and USB Type-C charging.
• Sensori esterni durevoli: IP68 waterproof, anti-dust, anti-theft, and suitable for a pressure range of 0.2 to 6.0 bar.

4. Configurazione e installazione

4.1 Installazione del monitor

The monitor can be installed on the windshield or dashboard. The detachable bracket allows for flexible positioning and easy removal for charging or adjustments.

1. Attach the removable bracket to the desired location on your windshield or dashboard using the adhesive provided. Ensure the surface is clean and dry.
2. Slide the TPMS monitor onto the bracket. The angle can be adjusted for optimal viewing.
3. Ensure the monitor does not obstruct your view durante la guida.

Figure 4.1: Monitor Installation and Detachable Bracket

4.2 Installazione del sensore

Install the external sensors on your vehicle's tire valves. Each sensor is labeled (FL, FR, RL, RR) for its corresponding tire (Front Left, Front Right, Rear Left, Rear Right).

1. Rimuovere il tappo originale della valvola del pneumatico.
2. Screw on a hex nut onto the tire valve.
3. Screw the corresponding sensor (e.g., FL for Front Left) onto the tire valve until it is hand-tight.
4. Serrare il dado esagonale contro il sensore utilizzando la chiave in dotazione per fissarlo ed evitarne il furto.
5. Ripetere l'operazione per tutti e quattro gli pneumatici.

Figure 4.2: External Sensor Installation Steps

Nota: The sensors are pre-paired with the monitor. If a sensor is replaced, it may need to be re-paired. Refer to the troubleshooting section for pairing instructions.

5. Istruzioni per l'uso

5.1 Powering On/Off and Automatic Functions

• Accensione iniziale: Press and hold the left button on the monitor for more than 3 seconds to turn it on.
• Sveglia automatica: The TPMS monitor will automatically turn on when it detects vehicle vibration (e.g., opening a car door, starting the engine).
• Modalità di sospensione automatica: If no vibration is detected for 5 minutes after parking, the monitor will automatically enter sleep mode to conserve power.

Figure 5.1: Automatic Sleep and Vibration Detection

5.2 Display and Alarm Modes

The 3.5-inch large screen displays real-time tire pressure and temperature for all four tires simultaneously. The system features six alarm modes:

• Rapid Air Leak Alarm: Alerts to sudden and significant pressure drops.
• Allarme alta pressione: Si attiva se la pressione degli pneumatici supera il limite massimo impostato.
• Allarme di bassa pressione: Activates if tire pressure falls below the set low limit.
• Allarme alta temperatura: Warns if tire temperature exceeds the set limit.
• Sensor Data Loss Alarm: Indica che un sensore non sta trasmettendo dati.
• Allarme batteria scarica: Alerts when the monitor or sensor battery is low.

Figure 5.2: Real-time Monitoring and Alarm Modes

5.3 Mode Switching (2-Wheel / 4-Wheel)

The system supports switching between 2-wheel mode (for trailers) and 4-wheel mode (for cars). This allows for accurate monitoring without unnecessary alarms when fewer sensors are active.

• To switch modes, access the system settings (refer to the full manual for specific button sequences).
• Select "2-Wheel Mode" if using only two sensors (e.g., for a trailer).
• Select "4-Wheel Mode" for standard car applications with four sensors.

Figure 5.3: 2-Wheel / 4-Wheel Mode Switching

5.4 Impostazione dei valori di allarme

This TPMS allows for separate high and low pressure alarm settings for front and rear tires, providing more precise monitoring tailored to your vehicle's requirements.

1. Enter the settings menu on the monitor.
2. Navigate to the alarm value adjustment section.
3. Set the desired high pressure alarm value for the front tires (e.g., 3.45 bar).
4. Set the desired low pressure alarm value for the front tires (e.g., 1.95 bar).
5. Repeat the process for the rear tires, setting their specific high and low pressure alarm values (e.g., 5.85 bar high, 2.55 bar low).
6. Salva le impostazioni prima di uscire dal menu.

Figure 5.4: Separate Front and Rear Wheel Alarm Settings

6. Manutenzione

6.1 Ricarica del monitor

Il monitor supporta due metodi di ricarica:

• Ricarica solare: The integrated solar panel charges the monitor when exposed to sunlight. Ensure the monitor is placed in a location with adequate sun exposure.
• Ricarica USB di tipo C: For cloudy days or when solar charging is insufficient, use the provided USB Type-C cable to charge the monitor via a car charger or other USB power source.

Importante: Charge the monitor for more than 3 hours before its first use. When fully charged, a long press of the left button will turn it on.

Figure 6.1: Solar and USB Type-C Charging

6.2 Sostituzione della batteria del sensore

The external sensors use replaceable CR1632 lithium-polymer batteries. When a low battery alarm for a sensor is triggered, replace its battery.

1. Unscrew the sensor from the tire valve.
2. Aprire con cautela il sensore casing.
3. Rimuovere la vecchia batteria CR1632.
4. Inserire una nuova batteria CR1632, garantendo la corretta polarità.
5. Chiudere il sensore casing and re-install it on the tire valve, following the installation steps in Section 4.2.

7. Risoluzione Dei Problemi

8. Specifiche

9. Garanzia e supporto

Vtopek provides a Garanzia di 1 anno for this TPMS product. For technical support, warranty claims, or any inquiries, please contact our customer service.

• Periodo di garanzia: 1 anno dalla data di acquisto.
• Contatto: Refer to the contact information provided with your product packaging or on the official Vtopek websito.

Figura 9.1: Informazioni su garanzia e supporto