Manuale utente del case da gaming mid-tower Phanteks XT Pro

1. Introduzione

Thank you for choosing the Phanteks XT Pro Mid-Tower Gaming Chassis. This manual provides detailed instructions for the assembly, installation, and maintenance of your new PC case. The XT Pro is designed for high airflow performance, featuring a mesh front panel and tempered glass side panel, offering excellent cooling capabilities and a clear view of your internal components. It supports a wide range of hardware, including large graphics cards and extensive cooling solutions.

Figure 1.1: Phanteks XT Pro Mid-Tower Gaming Chassis, showcasinil suo elegante design nero e il pannello laterale in vetro temperato.

2. Informazioni sulla sicurezza

• Always disconnect the power supply from the wall outlet before performing any installation, cleaning, or maintenance.
• Maneggiare con cura i pannelli in vetro temperato. Sono fragili e possono rompersi in caso di caduta o urto.
• Avoid exposing the chassis to extreme temperatures, humidity, or direct sunlight.
• Keep small components and screws out of reach of children.
• Assicurare una corretta messa a terra per evitare danni causati da scariche elettrostatiche (ESD) ai componenti elettronici sensibili.
• Do not attempt to modify the chassis structure or components, as this may void your warranty and pose safety risks.

3. Contenuto della confezione

Please verify that all items listed below are present in your package. If any items are missing or damaged, please contact Phanteks customer support.

• Phanteks XT Pro Mid-Tower Chassis
• Scatola degli accessori (viti, fascette, distanziatori, ecc.)
• Manuale dell'utente (questo documento)
• (Optional, depending on model) 1x 120mm Fan

4. Configurazione e installazione

4.1 Preparazione del telaio

Before installing components, remove the side panels. The tempered glass side panel is typically secured with thumbscrews at the rear. The solid steel side panel may also use thumbscrews or a latch mechanism.

Figura 4.1: View of the Phanteks XT Pro chassis with the tempered glass side panel installed.

Figura 4.2: Interno posteriore view of the chassis, showing cable management routes and drive mounting locations.

4.2 Installazione della scheda madre

Install the necessary motherboard standoffs into the chassis tray according to your motherboard's form factor (ATX, Micro-ATX, Mini-ITX). Carefully place the motherboard onto the standoffs, aligning the screw holes, and secure it with the provided motherboard screws.

Figura 4.3: Interno view of the Phanteks XT Pro with a motherboard, CPU cooler, and graphics card installed.

4.3 Installazione dell'unità di alimentazione (PSU).

The PSU mounts at the bottom rear of the chassis. Slide your PSU into the designated bay from the rear and secure it with screws. Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards, depending on your cooling preference.

4.4 Installazione dell'unità di archiviazione

The XT Pro supports multiple storage drives.

• HDD da 3.5": Install into the drive cage located under the PSU shroud.
• SSD da 2.5": Mount to the dedicated SSD brackets behind the motherboard tray.

Figure 4.4: Diagram illustrating the locations for 3.5" HDDs and 2.5" SSDs within the chassis.

4.5 Installazione della scheda grafica (GPU)

Remove the necessary PCIe slot covers at the rear of the chassis. Insert your graphics card into the PCIe slot on the motherboard and secure it with the thumbscrew or latch mechanism. The XT Pro supports large graphics cards without compromise.

4.6 Installazione di ventole e radiatori

The XT Pro offers extensive cooling support:

• Davanti: Up to 3x 120mm or 2x 140mm fans.
• Superiore: Up to 3x 120mm or 2x 140mm fans, supporting up to a 360mm radiator.
• Posteriore: 1 ventola da 120 mm.
• Metter il fondo a: Up to 2x 120mm fans.

Install fans and radiators using the appropriate screws. Ensure correct airflow direction for optimal cooling.

Figure 4.5: Diagram showing fan and radiator mounting locations and supported sizes (120mm, 140mm, and radiator sizes).

4.7 Gestione dei cavi

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables neatly. This improves airflow and aesthetics. Secure cables with zip ties or Velcro straps.

5. Funzionamento del telaio

5.1 Pannello I/O frontale

The front I/O panel is located on the top of the chassis and provides convenient access to essential ports and controls.

• Pulsante di accensione: Accende/spegne il sistema.
• Pulsante di reset: Riavvia il sistema.
• Porte USB: 3.0 Per il trasferimento dati ad alta velocità.
• Porta USB-C 3.0: Per i moderni dispositivi USB-C.
• Jack audio: Porte per cuffie e microfono.

Figura 5.1: primo piano view of the top I/O panel, indicating the Power Button, Reset Button, USB 3.0, USB-C 3.0, and Audio/Microphone jacks.

6. Manutenzione

Una manutenzione regolare aiuta a garantire prestazioni ottimali e longevità dei componenti del PC.

• Filtri antipolvere: The XT Pro features an ultra-fine performance mesh front panel and a top dust filter. Regularly clean these filters to maintain optimal airflow. They can typically be removed and cleaned with compressed air or a soft brush.
• Pulizia esterna: Pulire le superfici esterne con un panno morbido, damp panno. Evitare detergenti abrasivi o solventi.
• Pulizia interna: Periodically use compressed air to remove dust buildup from internal components like fans, heatsinks, and circuit boards. Ensure the system is powered off and unplugged before cleaning.

7. Risoluzione Dei Problemi

Questa sezione affronta i problemi più comuni che potresti incontrare.

• Il sistema non si accende:
  • Check all power connections: PSU to wall, PSU to motherboard, and front panel power switch cable to motherboard.
  • Assicurarsi che l'interruttore dell'alimentatore sia in posizione "ON".
• Nessuna uscita di visualizzazione:
  • Verify that the monitor cable is securely connected to the graphics card (or motherboard, if using integrated graphics).
  • Reinstallare la scheda grafica e i moduli RAM.
• Rumore eccessivo:
  • Check if any fan cables are obstructing fan blades.
  • Ensure all fans are securely mounted.
  • Clean dust from fans and filters.
• Poor airflow/high temperatures:
  • Pulire tutti i filtri antipolvere e i componenti interni.
  • Verify correct fan orientation (intake/exhaust).
  • Ensure no cables are blocking airflow paths.

For further assistance, please refer to the Phanteks support websito o contattare il loro servizio clienti.

8. Specifiche

Figura 8.1: Dimensionale suview of the Phanteks XT Pro chassis.

9. Garanzia e supporto

Phanteks products come with a limited warranty. Please refer to the official Phanteks website for the most up-to-date warranty information and terms specific to your region.

For technical support, product registration, or to download the latest drivers and manuals, please visit the official Phanteks support page:www.phanteks.com/support.html

When contacting support, please have your product model number (PH-XT523P1_BK01) and purchase information ready.