Hikvision DS-2CD1043G2-LIU

Hikvision DS-2CD1043G2-LIU 4MP PoE IP Bullet Security Camera User Manual

Model: DS-2CD1043G2-LIU | Brand: Hikvision

Introduzione

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hikvision DS-2CD1043G2-LIU 4MP PoE IP Bullet Security Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation. Keep this manual for future reference.

Informazioni sulla sicurezza

Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons. This includes, but is not limited to:

  • Ensure the power source meets the camera's requirements (12V DC or PoE).
  • Non esporre la fotocamera a temperature estreme, umidità o ambienti corrosivi.
  • Evitare l'esposizione diretta dell'obiettivo a fonti di luce intensa.
  • L'installazione deve essere eseguita da personale qualificato.
  • Disconnect power before any maintenance or installation procedures.

Contenuto della confezione

Verificare che tutti i componenti siano presenti nella confezione:

  • Hikvision DS-2CD1043G2-LIU IP Bullet Camera
  • Viti di montaggio e tasselli
  • Connettore impermeabile per cavo di rete
  • Quick Start Guide (this document serves as a detailed manual)
  • Dima di foratura

Prodotto finitoview

The Hikvision DS-2CD1043G2-LIU is a 4MP PoE IP bullet camera designed for outdoor surveillance. It features a 2.8mm fixed lens, IP67 weather resistance, and Night Color technology for enhanced low-light performance.

Lato view of the Hikvision DS-2CD1043G2-LIU IP camera showing the main body, lens, and mounting bracket.

Figura 1: lato view of the Hikvision DS-2CD1043G2-LIU camera with mounting bracket.

Davanti view of the Hikvision DS-2CD1043G2-LIU IP camera showing the lens and integrated microphone/speaker area.

Figura 2: Fronte view of the camera lens and sensor area.

Componenti chiave:

  • Lente: Obiettivo fisso da 2.8 mm per grandangolo viewing.
  • IR/White Light LEDs: For night vision and supplemental lighting.
  • Microfono: Per l'ingresso audio.
  • Interfaccia di rete (RJ45): Supports Power over Ethernet (PoE) and data transmission.
  • Potenza in ingresso: 12V DC power connector (if not using PoE).
  • Staffa di fissaggio: Regolabile per diverse angolazioni di installazione.

Impostare

1. Installazione fisica

  1. Scegli una posizione di montaggio: Selezionare una posizione esterna adatta che fornisca il desiderato viewing angle and is within reach of network cabling. Ensure the surface is strong enough to support the camera.
  2. Fori di perforazione: Use the provided drill template to mark and drill pilot holes for the mounting screws.
  3. Fissare la fotocamera: Attach the camera's mounting bracket to the wall or ceiling using the supplied screws and wall plugs.
  4. Regola l'angolo: Loosen the adjustment screws on the bracket to set the desired camera angle, then tighten them securely.

2. Connessione di rete e alimentazione

The camera supports Power over Ethernet (PoE) for simplified installation, or a 12V DC power adapter (sold separately).

  • Connessione PoE: Connect an Ethernet cable from a PoE-enabled switch or NVR directly to the camera's RJ45 port. Use the waterproof connector to protect the connection if installed outdoors.
  • 12V DC Power (Alternative): If not using PoE, connect a 12V DC power adapter to the camera's power input port and an Ethernet cable to the RJ45 port for data.

3. Configurazione iniziale

  1. Installa lo strumento SADP: Download and install the Hikvision SADP (Search Active Devices Protocol) tool from the official Hikvision website on a computer connected to the same network as the camera.
  2. Attiva la fotocamera: Run the SADP tool. It will detect the camera. Select the camera and set a strong password to activate it.
  3. Configurare le impostazioni di rete: Assign a static IP address or enable DHCP for the camera. Ensure the IP address is compatible with your network.
  4. Accesso tramite Web Navigatore: Aprire un web browser (e.g., Internet Explorer, Chrome) and enter the camera's IP address. Log in with the activated password to access the camera's web interfaccia per ulteriore configurazione.

Operativo

Vivere View e Registrazione

  • Web Interfaccia: After logging in, navigate to the "Live View" section to see the real-time video feed.
  • Registratore di rete/registratore digitale: If connected to a Hikvision NVR/DVR, the camera feed will be accessible through the recorder's interface.
  • Registrazione: Configure recording schedules, motion-triggered recording, or continuous recording via the web interface or NVR/DVR settings.

Funzionalità avanzate

  • Rilevamento del movimento: Set up motion detection zones and sensitivity. Configure actions such as recording, sending notifications, or triggering alarms.
  • Night Vision (Night Color): The camera automatically switches to Night Color mode in low-light conditions, providing enhanced color images.
  • Audio: Enable and configure audio input/output settings if supported and connected.
  • Impostazioni immagine: Adjust brightness, contrast, saturation, and other image parameters to optimize video quality.

Manutenzione

  • Pulizia: Regularly clean the camera lens with a soft, dry cloth. Do not use harsh detergents or abrasive materials.
  • Aggiornamenti del firmware: Controlla il sito ufficiale Hikvision website periodically for firmware updates. Always follow the provided instructions carefully when updating firmware to avoid damaging the device.
  • Ispezione dei cavi: Periodically inspect all cables and connections for wear, damage, or corrosion, especially for outdoor installations.

Risoluzione dei problemi

ProblemaPossibile causaSoluzione
Nessun feed video
  • Nessun potere
  • Cavo di rete scollegato
  • Indirizzo IP errato
  • Camera not activated
  • Check power supply (PoE or 12V DC).
  • Assicurarsi che il cavo di rete sia collegato saldamente.
  • Verify IP address using SADP tool.
  • Activate camera using SADP tool and set a password.
Scarsa qualità dell'immagine
  • Lente sporca
  • Illuminazione insufficiente
  • Incorrect image settings
  • Pulisci l'obiettivo della fotocamera.
  • Ensure adequate lighting or verify Night Color mode is active.
  • Adjust brightness, contrast, and other image settings in the web interfaccia.
Impossibile accedere alla fotocamera tramite web navigatore
  • Indirizzo IP errato
  • Problema di connettività di rete
  • Firewall che blocca l'accesso
  • Confirm the camera's IP address using SADP tool.
  • Check network cables and router/switch status.
  • Per effettuare il test, disabilita temporaneamente il firewall sul tuo computer.

Specifiche

Numero di modelloDS-2CD1043G2-LIU
Risoluzione4 Megapixel (1080p video capture resolution)
LenteObiettivo fisso 2.8mm
ConnettivitàWired (Ethernet, PoE), Wireless (Wi-Fi)
Alimentazione elettricaPoE (Power over Ethernet) o 12 V CC
Valutazione ambientaleIP67 (uso esterno)
Visione notturnaColore notturno
Tipo di allarmeSolo movimento
Dimensioni (L x P x A)Dimensioni: 17.1 x 6.6 x 6.9 cm
Peso430 grammi
MaterialeAcrilico
Tipo di montaggioWall Mount, Screwable

Garanzia

This Hikvision product comes with a Garanzia del produttore di 2 anniSi prega di conservare la prova d'acquisto per eventuali reclami in garanzia. La garanzia copre difetti di materiali e fabbricazione in condizioni di normale utilizzo. Non copre danni causati da uso improprio, incidenti, modifiche non autorizzate o installazione non corretta.

For detailed warranty terms and conditions, please refer to the official Hikvision warranty policy available on their websito o contattare l'assistenza clienti.

Supporto

For technical assistance, product inquiries, or further support, please visit the official Hikvision website or contact their customer service department. You can typically find support resources, FAQs, and contact information on their global or regional websiti.

Hikvision Ufficiale Websito: www.hikvision.com

© 2024 Hikvision. Tutti i diritti riservati. Le informazioni contenute nel presente manuale sono soggette a modifiche senza preavviso.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.