Introduzione
This manual provides essential instructions for the safe operation, assembly, maintenance, and troubleshooting of your Litheli 20V Cordless Pole Saw. Please read this manual thoroughly before using the tool to ensure proper function and to prevent injury.
Informazioni sulla sicurezza
Always wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and hearing protection when operating the pole saw. Ensure the work area is clear of bystanders and obstacles. Do not operate the tool in wet conditions or near power lines. Disconnect the battery before performing any maintenance or adjustments.
Componenti finitiview
Familiarize yourself with the parts of your Litheli 20V Cordless Pole Saw:
- Front Pole Assembly (with saw head)
- Palo di prolunga
- Rear Pole Assembly (with handle and battery slot)
- Barra guida
- Ha visto la catena
- Bar and Chain Sheath
- 2.5Ah U-Battery Plus
- Tracolla
- Manuale dell'operatore
Figure 1: Complete Litheli 20V Cordless Pole Saw assembly.
Installazione e assemblaggio
1. Connecting the Poles
Align the notch on the front pole with the arrow mark on the rear pole. Push them together firmly until they click into place. Tighten the sleeve in the marked direction to secure the connection.
2. Installazione della catena e della barra di guida
First, remove the chain cover by turning the locking knob counter-clockwise. Install the saw chain onto the guide bar, ensuring the cutting edges face the correct rotation direction as indicated by the symbol on the guide bar. Fit the chain onto the drive sprocket on the saw head. Replace the chain cover and tighten the locking knob clockwise.
3. Regolazione della tensione della catena
After installing the chain, check its tension by pulling it away from the guide bar. The chain should snap back into place. If it sags or is too tight, adjust the tension by turning the sleeve on the saw head. The chain should be snug but still able to move freely around the guide bar.
4. Aggiunta di olio per catena
Unscrew the oiler cap located on the saw head. Fill the reservoir with appropriate chain and bar oil. The pole saw is equipped with an automatic lubrication system, which will ensure the chain is continuously oiled during operation. Replace the oiler cap securely.
5. Inserimento della batteria
Press the battery release button on the rear pole assembly to open the battery compartment. Insert the fully charged 2.5Ah U-Battery Plus into the slot until it clicks securely into place. Ensure the battery is properly seated before operation.
6. Fissaggio della tracolla
Attach the shoulder strap to the designated attachment point on the pole. Adjust the strap length for comfortable and balanced operation, distributing the tool's weight to reduce fatigue.
Video 1: Step-by-step guide on how to install the Litheli U20 20V Pole Saw, covering pole connection, chain installation, tension adjustment, oiling, and battery insertion.
Istruzioni per l'uso
1. Avvio dello strumento
To start the pole saw, simultaneously press the safety lock-off button and squeeze the trigger switch. Release the lock-off button once the saw starts. To stop, release the trigger switch.
2. General Cutting Techniques
Always maintain a firm grip on the pole saw with both hands. Position yourself securely and ensure the cutting area is clear. Begin cutting with the bottom of the guide bar, allowing the chain to do the work. Avoid forcing the saw. For larger branches, make a relief cut on the underside first to prevent pinching.
Figure 2: Proper technique for operating the pole saw for tree trimming.
3. Utilizzo dell'asta di prolunga
The pole saw features an extendable pole, allowing you to reach branches up to 11.5 feet high (or 17.5 feet with user reach). To extend, loosen the sleeve, pull the pole to the desired length, and then tighten the sleeve securely. Always ensure the extension is locked before use.
Figure 3: The pole saw extended for reaching higher branches.
Video 2: Demonstration of the Litheli U20 Cordless Pole Saw in action, showcasing its cutting capabilities and ease of use for various tree trimming tasks.
Manutenzione
Regular maintenance ensures the longevity and safe operation of your pole saw.
1. Lubrificazione della catena
The automatic oiling system keeps the chain lubricated during operation. Regularly check the oil level in the reservoir and refill as needed with quality chain and bar oil. Proper lubrication is crucial for chain life and cutting performance.
Figure 4: The automatic oiling system ensures continuous chain lubrication.
2. Regolazione della tensione della catena
Check chain tension before each use. A properly tensioned chain should be snug against the guide bar but still allow you to pull it freely by hand. Adjust using the tool-free tensioning system as described in the setup section.
Figure 5: Tool-free chain tensioning mechanism for easy adjustment.
3. Pulizia e conservazione
After each use, clean the saw head, guide bar, and chain to remove sawdust and debris. Use a brush and mild detergent if necessary. Ensure all parts are dry before storage. Store the pole saw in a dry, secure location, out of reach of children, with the bar and chain sheath in place.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Saw non si avvia | Batteria non inserita correttamente o scarica; Pulsante di sicurezza non premuto; Interruttore difettoso. | Ensure battery is fully charged and properly seated. Press safety lock-off button simultaneously with trigger. Contact customer support if switch is faulty. |
| La catena non taglia in modo efficiente | Catena usurata; Tensione della catena non corretta; Lubrificazione insufficiente. | Affilare o sostituire la catena. Regolare la tensione della catena. Rabboccare il serbatoio dell'olio della catena. |
| La catena si stacca dalla barra di guida | Tensione della catena allentata; barra di guida o catena usurate. | Regolare la tensione della catena. Controllare che la barra di guida e la catena non siano usurate e sostituirle se necessario. |
| Il motore gira ma la catena non si muove | Chain jammed; Drive sprocket issue. | Clear any debris jamming the chain. Inspect drive sprocket for damage. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | U20PS00-0A110-1 |
| Fonte di alimentazione | Alimentato a batteria da 20 V |
| Tipo di batteria | 2.5Ah Li-ion (U-Battery Plus) |
| Lunghezza della barra | 8 pollici (20 cm) |
| Velocità della catena | 27.5 piedi/s (8.4 m/s) |
| Lunghezza di estensione | Da 7.7 piedi a 11.5 piedi |
| Maximum Reach (user dependent) | Fino a 17.5 piedi |
| Sistema di oliatura | Automatico |
| Peso | 9.9 libbre (4.5 kg) |
| Codice UPC | 740907591552 |
Garanzia e supporto
Your Litheli 20V Cordless Pole Saw is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. For technical support, replacement parts, or warranty claims, please contact Litheli customer service through their official websito o le informazioni di contatto fornite nella documentazione del prodotto.
Risorse online e FAQ potrebbero essere disponibili anche su Negozio Litheli su Amazon.