1. Introduzione
The Lumens VS-KB21 is an advanced IP camera controller designed for professional video production environments. It provides comprehensive control over up to 255 IP-connected cameras, supporting various communication interfaces including RS-232, RS-422, and Ethernet. Key features include a 4-axis joystick for precise Pan/Tilt/Zoom control, a 3-inch LCD for RTSP preview, and user-assignable keys for quick access to functions. This manual provides detailed instructions for setting up, operating, and maintaining your VS-KB21 controller.
2. Prodotto finitoview
Familiarize yourself with the components and controls of the VS-KB21 controller.
2.1 Controlli del pannello frontale
Figura 1: Fronte view of the Lumens VS-KB21 IP Camera Controller, showing the joystick, LCD screen, and various control buttons and knobs.
- joystick: 4-axis control for Pan, Tilt, and Zoom.
- Schermo LCD: 3-inch display for RTSP video preview e navigazione nel menu.
- Manopole: Dedicated controls for Iris, Shutter, Gain, White Balance, and Focus.
- tastiera: Numeric and function keys for camera selection, preset recall, and menu input.
- User-Assignable Keys (F1, F2): Pulsanti funzione personalizzabili.
- Zoom Seesaw Lever: For precise zoom control (Tele/Wide).
2.2 Collegamenti del pannello posteriore
Figura 2: Posteriore view of the Lumens VS-KB21 IP Camera Controller, highlighting the connectivity ports.
- Porta RS-422: For serial communication with cameras.
- Porta RS-232: For serial communication with cameras.
- Porta di SERVIZIO: USB port for firmware updates and service.
- Porta ETHERNET: RJ-45 connector for IP control and PoE (Power over Ethernet).
- INGRESSO CC 12V: Power input for the included DC adapter.
- Interruttore di ALIMENTAZIONE: Interruttore on/off per l'unità.
- LOCK Slot: For security cable.
3. Impostazione
Follow these steps to set up your VS-KB21 controller.
- Collegamento elettrico:
- Connect the provided DC 12V power adapter to the 'DC IN 12V' port on the rear panel and plug it into a power outlet.
- Alternatively, if using a PoE-enabled network switch, connect an Ethernet cable from the switch to the 'ETHERNET' port. The unit will power on via PoE.
- Network Connection (for IP Control):
- Connect an Ethernet cable from the 'ETHERNET' port on the controller to your network switch or router. Ensure the controller and IP cameras are on the same network segment.
- Serial Connection (for RS-232/RS-422 Control):
- For RS-232 control, connect a serial cable from the 'RS-232' port on the controller to the camera's RS-232 port.
- For RS-422 control, connect a serial cable from the 'RS-422' port on the controller to the camera's RS-422 port.
- Accensione iniziale:
- Flip the 'POWER' switch to the ON position. The LCD screen will illuminate, and the controller will initialize.
- Configurazione della fotocamera:
- Access the controller's settings menu via the LCD to add and configure your IP or serial cameras. Refer to the on-screen prompts for IP address, port, and protocol settings (VISCA, VISCA Over IP).
4. Istruzioni per l'uso
This section details the operation of the VS-KB21 controller for managing your cameras.
4.1 Selezione della telecamera
- Press the 'CAM LIST' button to view a list of configured cameras.
- Use the numeric keypad (CAM 1-7) or the joystick to select the desired camera.
- Premere 'INVIO' per confermare la selezione.
4.2 Controllo Pan, Tilt e Zoom (PTZ)
- Panoramica/Inclinazione: Move the 4-axis joystick left/right for pan and up/down for tilt.
- Ingrandisci: Rotate the joystick head or use the 'TELE' (zoom in) and 'WIDE' (zoom out) buttons on the seesaw lever.
- PTZ Speed: Adjust the 'PTZ SPEED' knob to control the responsiveness of the joystick.
4.3 Controllo della messa a fuoco
- Press the 'AUTO FOCUS' button for automatic focus adjustment.
- For manual focus, use the 'FOCUS' knob: rotate 'NEAR' to focus on closer objects, 'FAR' for distant objects.
4.4 Esposizione e bilanciamento del bianco
- Modalità di esposizione: Press 'EXPOSURE MODE' to cycle through auto, manual, and shutter priority modes.
- Iris/Shutter/Gain: Use the dedicated knobs to adjust these parameters in manual exposure mode.
- Bilanciamento del bianco: Press 'WB MODE' to select white balance presets or 'ONE PUSH WB' for automatic one-push white balance.
4.5 Preset
- Salvataggio di un preset: Position the camera as desired, then press 'SAVE' followed by a numeric key (0-9) to store the preset.
- Richiamo di un preset: Press 'CALL' followed by the numeric key corresponding to the saved preset.
4.6 RTSP Preview
- The 3-inch LCD screen supports RTSP video preview from the selected IP camera. Ensure the camera's RTSP stream is correctly configured in the controller's settings.
- Press 'PVW' to toggle the preview acceso/spento.
5. Manutenzione
Proper maintenance ensures the longevity and optimal performance of your VS-KB21 controller.
- Pulizia: Use a soft, dry cloth to clean the exterior of the controller. For stubborn marks, a slightly damp È possibile utilizzare un panno con un detergente delicato, assicurandosi che nessun liquido penetri nel dispositivo.
- Magazzinaggio: Quando non lo si utilizza, conservare il controller in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
- Aggiornamenti del firmware: Periodically check the Lumens official website for firmware updates. Updates can be installed via the 'SERVICE' USB port.
- Evitare i liquidi: Non esporre il controller all'acqua o ad altri liquidi.
- Evitare l'impatto: Protect the device from physical shocks and drops, especially the joystick.
6. Risoluzione Dei Problemi
Fare riferimento a questa sezione per trovare soluzioni ai problemi più comuni.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il controller non si accende. | No power supply; Power switch off; Faulty power adapter/PoE. | Ensure power adapter is connected and outlet is active. Check PoE connection. Verify power switch is ON. |
| Cannot control camera via IP. | Incorrect IP settings; Network issue; Camera not configured; Firewall blocking. | Verify IP address, subnet mask, and gateway settings. Ensure controller and camera are on the same network. Check camera configuration in controller. Disable firewalls temporarily for testing. |
| No RTSP preview sull'LCD. | Incorrect RTSP stream URL; Network congestion; Camera not streaming. | Confirm the RTSP stream URL in the controller's settings matches the camera's output. Check network bandwidth. Ensure the camera is actively streaming. |
| Joystick control is unresponsive or erratic. | Loose cable connection; Joystick calibration needed; Physical damage. | Check all cable connections. Refer to the controller's menu for joystick calibration options. If issues persist, contact support. |
7. Specifiche
Detailed technical specifications for the Lumens VS-KB21 IP Camera Controller.
| Caratteristica | Descrizione |
|---|---|
| Interfaccia di comunicazione | RS-232 / RS-422 / IP (Ethernet) |
| Display | LCD da 3 pollici |
| Leva di comando | 4-axis (Pan / Tilt / Zoom) |
| Controllo della velocità | 1 Manopola |
| Controllo dello zoom | 1 Seesaw Lever |
| Ottieni il controllo | Guadagno R/B |
| Controllo della messa a fuoco | Auto / Manuale |
| Pulsanti assegnabili | 2 (F1, F2) |
| Tastiera | Retroilluminato |
| Stream Preview | RTSP |
| Velocità in baud | 2400 / 4800 / 9600 / 38400 / 115200 bps |
| Camera Address Range | 1~255 |
| Preimpostazioni | 255 |
| Energia | 12 V CC/PoE |
| Dimensioni (LxAxP) | 11.89 x 5.63 x 4.41 pollici (30.2 x 14.3 x 11.2 cm) |
| Peso | 2.8 libbre (1.27 kg) |
| Colore | Nero |
| Nome del modello | VS-KB21 |
8. Garanzia e supporto
For warranty information, technical support, or service inquiries, please visit the official Lumens webo contattare il rivenditore autorizzato. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.
Lumen Websito: www.mylumens.com