EIMSOAH Automatic Transfer Switch NL03-125/2P User Manual

1. Introduzione

This manual provides essential information for the safe and effective installation, operation, and maintenance of the EIMSOAH NL03-125/2P Automatic Transfer Switch (ATS). This device is designed for 50Hz or 60Hz AC rated 110V 100A emergency power supply systems, ensuring continuous power by automatically switching between normal and standby power sources.

2. Informazioni sulla sicurezza

ATTENZIONE: Pericolo di scossa elettrica. L'installazione e la manutenzione devono essere eseguite solo da personale qualificato.

• Always disconnect power from both normal and standby sources before installation, inspection, or maintenance.
• Assicurarsi che tutti i collegamenti elettrici siano sicuri e conformi alle normative elettriche locali.
• Non azionare l'interruttore se appare danneggiato.
• The maximum surrounding temperature shall not exceed 40℃, the minimum shall not be lower than -5℃, and the average temperature within 24 hours shall not be higher than 35℃.
• The altitude of the installation site should not be higher than 2000m.
• When the maximum temperature reaches 40℃, the relative humidity of the installation site should not exceed 50%. At lower temperatures, higher humidity is permissible (e.g., 90% at 25℃). Special measures may be required to address occasional condensation.

3. Caratteristiche del prodotto

• Funzionamento automatico e manuale: The switch supports both automatic and manual switching modes.
• Commutazione rapida: Millisecond-level switching without interruption (Operation changeover time: ≤50ms).
• Montaggio su guida da 35 mm: Designed for standard 35mm DIN rail installation, facilitating easy setup and maintenance.
• Costruzione durevole: Constructed from flame-retardant PC material with good insulation and high-temperature resistance. Features silver contacts for improved conductivity and anti-aging properties.
• Funzioni di protezione: Includes short circuit protection, overload protection, phase failure protection, and undervoltage protezione.
• Ampia applicazione: Suitable for various settings requiring continuous power, such as homes, shopping malls, factories, laboratories, and farms.

Immagine 3.1: Passoview of the EIMSOAH Automatic Transfer Switch, illustrating its auto/manual operation, 35mm rail mount compatibility, reliable transmission, and PC and silver material composition.

4. Specifiche

5. Configurazione e installazione

Before installation, carefully inspect the ATS for any damage. Ensure the operating handle moves freely to confirm the flexibility of the drive mechanism. Test the generation and disconnection conditions for each stage of load for both normal and standby power sources.

5.1 Montaggio

The ATS is designed for standard 35mm DIN rail mounting. Securely attach the switch to the DIN rail in your PZ30 distribution box or other suitable enclosure.

Immagine 5.1: Primo piano view of the Automatic Transfer Switch, illustrating the fixed snap mechanism for guide rail installation, highlighting its secure and insulated design.

5.2 Collegamenti di cablaggio

Connect the normal power source, standby power source, and load output according to the wiring diagram. Ensure all connections are tight and correct to prevent electrical hazards and ensure proper operation.

Image 5.2: Detailed wiring diagram for the Automatic Transfer Switch, showing connections for commonly used incoming lines, spare incoming line, load output, common control lines, and spare control line.

The switch features copper terminals for strong electrical conductivity and silver contacts for enhanced durability and performance.

Immagine 5.3: Dettagliata view of the Automatic Transfer Switch's internal components, highlighting the silver contacts and copper terminals, and illustrating the power transfer from grid/public power to solar/wind/battery.

6. Istruzioni per l'uso

The Automatic Transfer Switch is designed to provide continuous power by automatically switching between a normal power supply and a backup power supply.

6.1 Modalità automatica

In automatic mode, the switch continuously monitors the normal power supply. If the normal power supply becomes abnormal (e.g., power outage), the switch will automatically transfer the load to the standby power supply within milliseconds. Once the normal power supply is restored, the switch will automatically revert the load back to the normal power supply.

Image 6.1: Diagram illustrating the automatic power transfer process: upon power outage, the system transfers to backup power, and upon incoming power, it transfers back to main power with millisecond switching.

6.2 Modalità manuale

The switch can also be operated manually using the operating handle. This allows for manual selection of the power source when required, overriding the automatic function. Ensure the power is disconnected before manually switching if safety protocols require it.

7. Manutenzione

Regular inspection of the Automatic Transfer Switch is recommended to ensure optimal performance and safety.

• Controllare periodicamente tutti i collegamenti elettrici per verificarne la tenuta e l'assenza di segni di corrosione.
• Inspect the switch for any physical damage or signs of overheating.
• Ensure the operating handle moves freely and without obstruction.
• Keep the switch clean and free from dust and debris.

8. Risoluzione Dei Problemi

If the Automatic Transfer Switch is not functioning as expected, consider the following:

• Nessun trasferimento di potenza: Verify that both normal and standby power sources are active and correctly connected. Check for tripped circuit breakers or blown fuses.
• Funzionamento intermittente: Inspect all wiring for loose connections. Ensure the environmental conditions (temperature, humidity) are within the specified limits.
• Interruttore non innestato: Check the manual operating handle for any obstructions. If in automatic mode, ensure control signals are correctly received.

If issues persist after basic troubleshooting, contact a qualified electrician or the manufacturer for assistance.

9. Garanzia e supporto

For warranty information or technical support, please refer to the product packaging or contact EIMSOAH customer service through their official channels. Keep your purchase receipt for warranty claims.