onerbl 12V AC-DC Adapter for Arcade1Up STF-A-202110, STF-A-303911

onerbl 12V AC-DC Adapter Instruction Manual

For Arcade1Up STF-A-202110 and STF-A-303911 Cabinets

1. Introduzione

This manual provides instructions for the safe and effective use of your onerbl 12V AC-DC Adapter. This adapter is designed as a replacement power supply for specific Arcade1Up game cabinets, including models STF-A-202110 and STF-A-303911. It converts standard AC wall power into the 12V DC power required by your device.

2. Informazioni sulla sicurezza

  • Leggi tutte le istruzioni: Before using the adapter, read and understand all safety and operating instructions.
  • Solo per uso interno: Questo adattatore è progettato per uso interno. Non esporlo a pioggia, umidità o temperature estreme.
  • Volume correttotage: Assicurarsi che la presa a muro voltage matches the adapter's input requirements (typically 100-240V AC).
  • Evitare danni: Do not use the adapter if the cord or plug is damaged. Do not bend, twist, or pull the cord excessively.
  • Ventilazione: Ensure adequate ventilation around the adapter. Do not cover it or place it in an enclosed space that could restrict airflow.
  • Scollegare quando non in uso: Scollegare l'adattatore dalla presa a muro quando non lo si utilizza per lunghi periodi.
  • Tenere lontano dai bambini: Questo prodotto non è un giocattolo. Tenerlo fuori dalla portata dei bambini.
  • Compatibilità: Use this adapter only with compatible devices as specified. Using it with incompatible devices may cause damage. This adapter is specifically for 12V versions of Arcade1Up cabinets, not 5V versions.

3. Contenuto della confezione

Verificare che tutti gli articoli siano presenti nel pacco:

  • 1 x onerbl 12V AC-DC Power Adapter
  • 1 x AC Power Cord (Type A - 2 pin, North American)
onerbl 12V AC-DC Power Adapter and AC Power Cord
Image 3.1: The onerbl 12V AC-DC Power Adapter and its accompanying AC power cord.
AC Power Cord with Type A - 2 pin plug
Immagine 3.2: Primo piano view of the AC power cord, featuring a Type A - 2 pin plug for North American outlets.

4. Impostazione

  1. Collegare il cavo di alimentazione CA: Insert the female end of the AC power cord into the input port of the onerbl 12V AC-DC adapter. Ensure it is firmly seated.
  2. Collegare alla presa a muro: Plug the 2-pin male end of the AC power cord into a standard North American 100-240V AC wall outlet.
  3. Connetti al dispositivo: Locate the DC input port on your Arcade1Up game cabinet (models STF-A-202110 or STF-A-303911). Insert the DC barrel connector from the onerbl adapter into this port.
  4. Verifica connessione: Ensure all connections are secure before powering on your Arcade1Up cabinet.
onerbl AC-DC adapter connected to a wall outlet and a device
Image 4.1: The onerbl AC-DC adapter properly connected to a wall outlet and ready to power a compatible device.

5. Istruzioni per l'uso

Once the adapter is correctly connected to both the wall outlet and your Arcade1Up cabinet, the cabinet should receive power. Follow the operating instructions provided with your Arcade1Up game cabinet to power it on and begin use.

  • The adapter is designed for continuous operation when powering your device.
  • A small indicator light on the adapter may illuminate when power is supplied, indicating it is functioning.
  • To power off your Arcade1Up cabinet, use the cabinet's power switch. For complete power disconnection, unplug the adapter from the wall outlet.

6. Manutenzione

  • Pulizia: Scollegare l'adattatore da tutte le fonti di alimentazione prima di pulirlo. Utilizzare un panno morbido e asciutto per pulire la superficie. Non utilizzare detergenti liquidi o spray.
  • Magazzinaggio: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid wrapping the cable too tightly around the adapter.
  • Ispezione: Periodically inspect the adapter and its cables for any signs of damage, such as cuts, fraying, or bent pins. If damage is found, discontinue use and replace the adapter.

7. Risoluzione Dei Problemi

ProblemaPossibile causaSoluzione
Arcade1Up cabinet does not power on.
  • Adattatore non collegato correttamente.
  • Wall outlet not providing power.
  • L'adattatore o il cavo sono danneggiati.
  • Incorrect adapter for the device (e.g., 5V cabinet with 12V adapter).
  • Ensure all connections (wall, adapter, device) are secure.
  • Provare la presa a muro con un altro dispositivo.
  • Inspect adapter and cables for damage. Replace if damaged.
  • Verify your Arcade1Up cabinet requires a 12V power supply. This adapter is not for 5V versions.
L'adattatore risulta caldo durante l'uso.
  • Normal operation (slight warmth is common).
  • Scarsa ventilazione.
  • Sovraccarico o guasto interno.
  • Ensure adequate airflow around the adapter.
  • If excessively hot or emitting smoke/smell, immediately unplug and discontinue use. Contact support.

8. Specifiche

Marcaonerbl
Ingresso volumetage100-240V AC (Standard Global)
Volume di uscitatage12 Volt CC
Tipo di connettoreDC Barrel (Proprietary)
Dispositivi compatibiliArcade1Up STF-A-202110, STF-A-303911, Capcom Street Fighter II 2 Deluxe Champion Turbo Legacy Edition Cabinet Game Machine Arcade 1up (12V versions only)
Potenza Tipo spinaTipo A - 2 pin (Nord America)
ProduttoreShenzhen Waweis Technology Co., Ltd
Cable Length (Total)Circa 127.8 pollici (324.6 cm)
Dimensions of the onerbl 12V AC-DC adapter and cable
Image 8.1: Detailed dimensions of the adapter unit and cable lengths.

9. Informazioni sulla garanzia

This product is covered by a standard manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for warranty purposes.

10. Supporto

If you encounter issues not covered in the troubleshooting section or require further assistance, please contact the seller or manufacturer:

  • Venditore: GreatComputerParts (as listed on Amazon)
  • Produttore: Shenzhen Waweis Technology Co., Ltd
  • For online support, visit the product page on Amazon or the manufacturer's official websito se disponibile.

When contacting support, please have your product model (onerbl 12V AC-DC Adapter) and purchase details ready.

© 2024 onerbl. Tutti i diritti riservati.