WINDFIRE DM06 / TS08 Series Dive Light User Manual

1. Introduzione

This manual provides detailed instructions for the operation and maintenance of your WINDFIRE DM06 / TS08 Series Dive Light. Please read this manual thoroughly before using the product to ensure proper function and safety.

The WINDFIRE Dive Light is designed for underwater activities, featuring a robust waterproof construction and multiple lighting modes. It is suitable for scuba diving, snorkeling, and other water sports.

2. Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

• 1 x WINDFIRE Scuba Diving Flashlight (DM06 or TS08 model)
• 1 x Rechargeable Battery (WF-BAT)
• 1 x Caricabatterie USB
• 2 x Waterproof O-rings (for DM06) / 3 x Waterproof Rings (for TS08)
• 1 x Hand Rope / Hand Strap
• 1 x scatola di immagazzinaggio

3. Configurazione e installazione della batteria

1. Caricare la batteria:

   Before first use, fully charge the provided rechargeable battery using the USB charger. The charging time is approximately 5.5 hours. Ensure the charger's indicator light shows a full charge before proceeding.

2. Installare la batteria:

   Unscrew the tail cap of the dive light. Insert the fully charged battery with the positive (+) end facing towards the light head. Carefully screw the tail cap back on, ensuring it is tightened securely to maintain the waterproof seal.

   

   Immagine: Esploso view of the black WINDFIRE dive light, illustrating the power button, tempering glass, LED, aluminum alloy body, waterproof rings, and hand strap for assembly.

   

   Immagine: Esploso view of the blue WINDFIRE dive light, showing the power switch, high transparent coated toughened glass, and XM-L2 LED lamp beads, along with dimensions.

3. Ispezionare gli O-ring:

   Before each use, especially after battery changes, inspect the O-rings for any dirt, damage, or wear. Ensure they are clean and properly seated in their grooves. Lubricate O-rings with silicone grease if necessary to maintain the waterproof seal. Replace damaged O-rings with the spares provided.
4. Attach Hand Rope/Strap:

   Secure the hand rope or strap to the dive light for added security during underwater use.

4. Istruzioni per l'uso

1. Accensione/spegnimento:

   Press the power button located on the body of the flashlight to turn the light on. Press it again to cycle through the lighting modes and to turn it off.
2. Commutazione delle modalità di illuminazione:

   The dive light features three lighting modes: High, Low, and SOS. Each press of the power button will cycle to the next mode. The sequence is typically High → Low → SOS → Off.

   

   Image: Visual representation of the three lighting modes (High, Low, SOS) available on the WINDFIRE dive light.

   

   Image: A diver using the blue WINDFIRE dive light, illustrating the High (3 hours), Low (5.5 hours), and SOS (4 hours) lighting modes and their approximate runtimes.
3. Indicatore della batteria:

   The power button incorporates a battery indicator light to display the remaining battery power:

   • Luce verde: Over 30% battery remaining.
   • Luce arancione: Batteria rimanente dall'10% al 30%.
   • Luce rossa: Meno del 10% di batteria rimanente.
   • Luce rossa lampeggiante: Critically low battery, recharge immediately.
   

   Image: Close-up of the WINDFIRE dive light's power button, demonstrating the smart battery indicator with green (over 30%), orange (10%-30%), and red (less than 10%) light states.

5. Manutenzione

• Dopo ogni immersione: Rinse the dive light thoroughly with fresh water to remove salt, sand, and other debris. Dry it completely with a soft cloth.
• Cura dell'O-ring: Regularly inspect the O-rings for cracks, cuts, or deformation. Clean them and apply a thin layer of silicone grease to keep them pliable and ensure a watertight seal. Replace O-rings if any damage is observed.
• Ricarica della batteria: Recharge the battery when the indicator shows low power. Avoid completely draining the battery to prolong its lifespan. Store the battery partially charged if not used for extended periods.
• Magazzinaggio: Store the dive light in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery if storing for a long duration to prevent potential leakage.

6. Risoluzione Dei Problemi

7. Specifiche

DM06 Model Specifications:

• Tipo di LED: GUIDATO
• Luce: 5000 lumen
• Allineare: 250 metri
• Modalità di illuminazione: High-Low-SOS
• Depth Rated: 60 metri
• Grado di impermeabilità: Grado di protezione IP68
• Supporto di alimentazione: 1*Rechargeable battery
• Misurare: 128*32*28 mm (5.04*1.26*1.1 pollici)
• Peso: 120 g (0.26 libbre)

TS08 Model Specifications:

• Tipo di lampadina: High lumen lamp perline
• Luce: 5000 lumen
• Distanza di irradiazione: 150 metri
• Profondità di immersione: 60 metri
• Materiale: A6063 aluminum
• Modalità: High - Low - SOS
• Durata: 3-5 ore
• Supporto di alimentazione: 1*rechargeable battery
• Grado di impermeabilità: Grado di protezione IPX8
• Misurare: 142*23*23mm (5.59*0.91*0.91 inch)
• Peso netto: 168 g (6 once)

Image: Illustration highlighting the IPX8 waterproof rating of the WINDFIRE dive light, indicating its capability for underwater use up to 60 meters.

Image: Features of the blue WINDFIRE dive light, including IP68 waterproof, shock-resistance, ultra bright output, rechargeable battery, long-lasting performance, and a 250-meter range.

8. Garanzia e supporto

Garanzia: WINDFIRE provides a 12-month warranty for quality-related issues from the date of purchase. Additionally, a 30-day money-back guarantee is offered for any reason. Please retain your proof of purchase for warranty claims.

Assistenza clienti: If you encounter any issues or have questions regarding your WINDFIRE Dive Light, please contact our professional customer service. Refer to your purchase platform or product packaging for specific contact details.